1. 18 Sep, 2006 1 commit
  2. 15 Sep, 2006 5 commits
  3. 02 Aug, 2006 1 commit
  4. 18 Sep, 2006 1 commit
  5. 12 Sep, 2006 1 commit
  6. 21 Aug, 2006 2 commits
  7. 09 Aug, 2006 1 commit
  8. 25 Jul, 2006 1 commit
    • Simon Marlow's avatar
      Generalise Package Support · 61d2625a
      Simon Marlow authored
      This patch pushes through one fundamental change: a module is now
      identified by the pair of its package and module name, whereas
      previously it was identified by its module name alone.  This means
      that now a program can contain multiple modules with the same name, as
      long as they belong to different packages.
      
      This is a language change - the Haskell report says nothing about
      packages, but it is now necessary to understand packages in order to
      understand GHC's module system.  For example, a type T from module M
      in package P is different from a type T from module M in package Q.
      Previously this wasn't an issue because there could only be a single
      module M in the program.
      
      The "module restriction" on combining packages has therefore been
      lifted, and a program can contain multiple versions of the same
      package.
      
      Note that none of the proposed syntax changes have yet been
      implemented, but the architecture is geared towards supporting import
      declarations qualified by package name, and that is probably the next
      step.
      
      It is now necessary to specify the package name when compiling a
      package, using the -package-name flag (which has been un-deprecated).
      Fortunately Cabal still uses -package-name.
      
      Certain packages are "wired in".  Currently the wired-in packages are:
      base, haskell98, template-haskell and rts, and are always referred to
      by these versionless names.  Other packages are referred to with full
      package IDs (eg. "network-1.0").  This is because the compiler needs
      to refer to entities in the wired-in packages, and we didn't want to
      bake the version of these packages into the comiler.  It's conceivable
      that someone might want to upgrade the base package independently of
      GHC.
      
      Internal changes:
      
        - There are two module-related types:
      
              ModuleName      just a FastString, the name of a module
              Module          a pair of a PackageId and ModuleName
      
          A mapping from ModuleName can be a UniqFM, but a mapping from Module
          must be a FiniteMap (we provide it as ModuleEnv).
      
        - The "HomeModules" type that was passed around the compiler is now
          gone, replaced in most cases by the current package name which is
          contained in DynFlags.  We can tell whether a Module comes from the
          current package by comparing its package name against the current
          package.
      
        - While I was here, I changed PrintUnqual to be a little more useful:
          it now returns the ModuleName that the identifier should be qualified
          with according to the current scope, rather than its original
          module.  Also, PrintUnqual tells whether to qualify module names with
          package names (currently unused).
      
      Docs to follow.
      61d2625a
  9. 23 Jun, 2006 1 commit
  10. 19 May, 2006 1 commit
  11. 14 Apr, 2006 1 commit
    • simonpj@microsoft.com's avatar
      Allow $x, as well as $(x), at top level in TH · 6b2cf62b
      simonpj@microsoft.com authored
      Bulat pointed out that in Template Haskell
         $x
      is allowed instead of 
         $(x)
      in expressions, but not at the top level of modules.
      
      This commit fixes the omission.  Now you can say
      
      	f x = x
       	$h
      	data T = T
      
      and the $h will run Template Haskell just as you'd expect.
      6b2cf62b
  12. 07 Apr, 2006 1 commit
    • Simon Marlow's avatar
      Reorganisation of the source tree · 0065d5ab
      Simon Marlow authored
      Most of the other users of the fptools build system have migrated to
      Cabal, and with the move to darcs we can now flatten the source tree
      without losing history, so here goes.
      
      The main change is that the ghc/ subdir is gone, and most of what it
      contained is now at the top level.  The build system now makes no
      pretense at being multi-project, it is just the GHC build system.
      
      No doubt this will break many things, and there will be a period of
      instability while we fix the dependencies.  A straightforward build
      should work, but I haven't yet fixed binary/source distributions.
      Changes to the Building Guide will follow, too.
      0065d5ab
  13. 05 Mar, 2006 1 commit
  14. 01 Mar, 2006 1 commit
  15. 03 Feb, 2006 1 commit
  16. 25 Jan, 2006 1 commit
    • simonpj@microsoft.com's avatar
      Simon's big boxy-type commit · ac10f840
      simonpj@microsoft.com authored
      This very large commit adds impredicativity to GHC, plus
      numerous other small things.
        
      *** WARNING: I have compiled all the libraries, and
      ***	     a stage-2 compiler, and everything seems
      ***	     fine.  But don't grab this patch if you 
      ***	     can't tolerate a hiccup if something is
      ***	     broken.
        
      The big picture is this:
      
      a) GHC handles impredicative polymorphism, as described in the
         "Boxy types: type inference for higher-rank types and
         impredicativity" paper
      
      b) GHC handles GADTs in the new simplified (and very sligtly less
         epxrssive) way described in the
         "Simple unification-based type inference for GADTs" paper
      
        
      But there are lots of smaller changes, and since it was pre-Darcs
      they are not individually recorded.
        
      Some things to watch out for:
        
      c)   The story on lexically-scoped type variables has changed, as per
           my email.  I append the story below for completeness, but I 
           am still not happy with it, and it may change again.  In particular,
           the new story does not allow a pattern-bound scoped type variable
           to be wobbly, so (\(x::[a]) -> ...) is usually rejected.  This is
           more restrictive than before, and we might loosen up again.
        
      d)   A consequence of adding impredicativity is that GHC is a bit less
           gung ho about converting automatically between
        	(ty1 -> forall a. ty2)    and    (forall a. ty1 -> ty2)
           In particular, you may need to eta-expand some functions to make
           typechecking work again.
         
           Furthermore, functions are now invariant in their argument types,
           rather than being contravariant.  Again, the main consequence is
           that you may occasionally need to eta-expand function arguments when
           using higher-rank polymorphism.
        
      
      Please test, and let me know of any hiccups
      
      
      Scoped type variables in GHC
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      	January 2006
      
      0) Terminology.
         
         A *pattern binding* is of the form
      	pat = rhs
      
         A *function binding* is of the form
      	f pat1 .. patn = rhs
      
         A binding of the formm
      	var = rhs
         is treated as a (degenerate) *function binding*.
      
      
         A *declaration type signature* is a separate type signature for a
         let-bound or where-bound variable:
      	f :: Int -> Int
      
         A *pattern type signature* is a signature in a pattern: 
      	\(x::a) -> x
      	f (x::a) = x
      
         A *result type signature* is a signature on the result of a
         function definition:
      	f :: forall a. [a] -> a
      	head (x:xs) :: a = x
      
         The form
      	x :: a = rhs
         is treated as a (degnerate) function binding with a result
         type signature, not as a pattern binding.
      
      1) The main invariants:
      
           A) A lexically-scoped type variable always names a (rigid)
       	type variable (not an arbitrary type).  THIS IS A CHANGE.
              Previously, a scoped type variable named an arbitrary *type*.
      
           B) A type signature always describes a rigid type (since
      	its free (scoped) type variables name rigid type variables).
      	This is also a change, a consequence of (A).
      
           C) Distinct lexically-scoped type variables name distinct
      	rigid type variables.  This choice is open; 
      
      2) Scoping
      
      2(a) If a declaration type signature has an explicit forall, those type
         variables are brought into scope in the right hand side of the 
         corresponding binding (plus, for function bindings, the patterns on
         the LHS).  
      	f :: forall a. a -> [a]
      	f (x::a) = [x :: a, x]
         Both occurences of 'a' in the second line are bound by 
         the 'forall a' in the first line
      
         A declaration type signature *without* an explicit top-level forall
         is implicitly quantified over all the type variables that are
         mentioned in the type but not already in scope.  GHC's current
         rule is that this implicit quantification does *not* bring into scope
         any new scoped type variables.
      	f :: a -> a
      	f x = ...('a' is not in scope here)...
         This gives compatibility with Haskell 98
      
      2(b) A pattern type signature implicitly brings into scope any type
         variables mentioned in the type that are not already into scope.
         These are called *pattern-bound type variables*.
      	g :: a -> a -> [a]
      	g (x::a) (y::a) = [y :: a, x]
         The pattern type signature (x::a) brings 'a' into scope.
         The 'a' in the pattern (y::a) is bound, as is the occurrence on 
         the RHS.  
      
         A pattern type siganture is the only way you can bring existentials 
         into scope.
      	data T where
      	  MkT :: forall a. a -> (a->Int) -> T
      
      	f x = case x of
      		MkT (x::a) f -> f (x::a)
      
      2a) QUESTION
      	class C a where
      	  op :: forall b. b->a->a
      
      	instance C (T p q) where
      	  op = <rhs>
          Clearly p,q are in scope in <rhs>, but is 'b'?  Not at the moment.
          Nor can you add a type signature for op in the instance decl.
          You'd have to say this:
      	instance C (T p q) where
      	  op = let op' :: forall b. ...
      	           op' = <rhs>
      	       in op'
      
      3) A pattern-bound type variable is allowed only if the pattern's
         expected type is rigid.  Otherwise we don't know exactly *which*
         skolem the scoped type variable should be bound to, and that means
         we can't do GADT refinement.  This is invariant (A), and it is a 
         big change from the current situation.
      
      	f (x::a) = x	-- NO; pattern type is wobbly
      	
      	g1 :: b -> b
      	g1 (x::b) = x	-- YES, because the pattern type is rigid
      
      	g2 :: b -> b
      	g2 (x::c) = x	-- YES, same reason
      
      	h :: forall b. b -> b
      	h (x::b) = x	-- YES, but the inner b is bound
      
      	k :: forall b. b -> b
      	k (x::c) = x	-- NO, it can't be both b and c
      
      3a) You cannot give different names for the same type variable in the same scope
          (Invariant (C)):
      
      	f1 :: p -> p -> p		-- NO; because 'a' and 'b' would be
      	f1 (x::a) (y::b) = (x::a)	--     bound to the same type variable
      
      	f2 :: p -> p -> p		-- OK; 'a' is bound to the type variable
      	f2 (x::a) (y::a) = (x::a)	--     over which f2 is quantified
      					-- NB: 'p' is not lexically scoped
      
      	f3 :: forall p. p -> p -> p	-- NO: 'p' is now scoped, and is bound to
      	f3 (x::a) (y::a) = (x::a)	--     to the same type varialble as 'a'
      
      	f4 :: forall p. p -> p -> p	-- OK: 'p' is now scoped, and its occurences
      	f4 (x::p) (y::p) = (x::p)	--     in the patterns are bound by the forall
      
      
      3b) You can give a different name to the same type variable in different
          disjoint scopes, just as you can (if you want) give diferent names to 
          the same value parameter
      
      	g :: a -> Bool -> Maybe a
      	g (x::p) True  = Just x  :: Maybe p
      	g (y::q) False = Nothing :: Maybe q
      
      3c) Scoped type variables respect alpha renaming. For example, 
          function f2 from (3a) above could also be written:
      	f2' :: p -> p -> p
      	f2' (x::b) (y::b) = x::b
         where the scoped type variable is called 'b' instead of 'a'.
      
      
      4) Result type signatures obey the same rules as pattern types signatures.
         In particular, they can bind a type variable only if the result type is rigid
      
      	f x :: a = x	-- NO
      
      	g :: b -> b
      	g x :: b = x	-- YES; binds b in rhs
      
      5) A *pattern type signature* in a *pattern binding* cannot bind a 
         scoped type variable
      
      	(x::a, y) = ...		-- Legal only if 'a' is already in scope
      
         Reason: in type checking, the "expected type" of the LHS pattern is
         always wobbly, so we can't bind a rigid type variable.  (The exception
         would be for an existential type variable, but existentials are not
         allowed in pattern bindings either.)
       
         Even this is illegal
      	f :: forall a. a -> a
      	f x = let ((y::b)::a, z) = ... 
      	      in 
         Here it looks as if 'b' might get a rigid binding; but you can't bind
         it to the same skolem as a.
      
      6) Explicitly-forall'd type variables in the *declaration type signature(s)*
         for a *pattern binding* do not scope AT ALL.
      
      	x :: forall a. a->a	  -- NO; the forall a does 
      	Just (x::a->a) = Just id  --     not scope at all
      
      	y :: forall a. a->a
      	Just y = Just (id :: a->a)  -- NO; same reason
      
         THIS IS A CHANGE, but one I bet that very few people will notice.
         Here's why:
      
      	strange :: forall b. (b->b,b->b)
      	strange = (id,id)
      
      	x1 :: forall a. a->a
      	y1 :: forall b. b->b
      	(x1,y1) = strange
      
          This is legal Haskell 98 (modulo the forall). If both 'a' and 'b'
          both scoped over the RHS, they'd get unified and so cannot stand
          for distinct type variables. One could *imagine* allowing this:
         
      	x2 :: forall a. a->a
      	y2 :: forall a. a->a
      	(x2,y2) = strange
      
          using the very same type variable 'a' in both signatures, so that
          a single 'a' scopes over the RHS.  That seems defensible, but odd,
          because though there are two type signatures, they introduce just
          *one* scoped type variable, a.
      
      7) Possible extension.  We might consider allowing
      	\(x :: [ _ ]) -> <expr>
          where "_" is a wild card, to mean "x has type list of something", without
          naming the something.
      ac10f840
  17. 06 Jan, 2006 1 commit
    • simonmar's avatar
      [project @ 2006-01-06 16:30:17 by simonmar] · 9d7da331
      simonmar authored
      Add support for UTF-8 source files
      
      GHC finally has support for full Unicode in source files.  Source
      files are now assumed to be UTF-8 encoded, and the full range of
      Unicode characters can be used, with classifications recognised using
      the implementation from Data.Char.  This incedentally means that only
      the stage2 compiler will recognise Unicode in source files, because I
      was too lazy to port the unicode classifier code into libcompat.
      
      Additionally, the following synonyms for keywords are now recognised:
      
        forall symbol 	(U+2200)	forall
        right arrow   	(U+2192)	->
        left arrow   		(U+2190)	<-
        horizontal ellipsis 	(U+22EF)	..
      
      there are probably more things we could add here.
      
      This will break some source files if Latin-1 characters are being used.
      In most cases this should result in a UTF-8 decoding error.  Later on
      if we want to support more encodings (perhaps with a pragma to specify
      the encoding), I plan to do it by recoding into UTF-8 before parsing.
      
      Internally, there were some pretty big changes:
      
        - FastStrings are now stored in UTF-8
      
        - Z-encoding has been moved right to the back end.  Previously we
          used to Z-encode every identifier on the way in for simplicity,
          and only decode when we needed to show something to the user.
          Instead, we now keep every string in its UTF-8 encoding, and
          Z-encode right before printing it out.  To avoid Z-encoding the
          same string multiple times, the Z-encoding is cached inside the
          FastString the first time it is requested.
      
          This speeds up the compiler - I've measured some definite
          improvement in parsing at least, and I expect compilations overall
          to be faster too.  It also cleans up a lot of cruft from the
          OccName interface.  Z-encoding is nicely hidden inside the
          Outputable instance for Names & OccNames now.
      
        - StringBuffers are UTF-8 too, and are now represented as
          ForeignPtrs.
      
        - I've put together some test cases, not by any means exhaustive,
          but there are some interesting UTF-8 decoding error cases that
          aren't obvious.  Also, take a look at unicode001.hs for a demo.
      9d7da331
  18. 16 Nov, 2005 1 commit
    • simonpj's avatar
      [project @ 2005-11-16 17:45:38 by simonpj] · 491c85e7
      simonpj authored
      Better error reporting for newtypes with too many constructors,
      or too many fields.  Instead of yielding a parse error, we
      parse it like a data type declaration, and give a comprehensible
      error message later.
      
      A suggestion from Jan-Willem.
      491c85e7
  19. 12 Nov, 2005 1 commit
    • simonpj's avatar
      [project @ 2005-11-12 21:41:12 by simonpj] · 87998beb
      simonpj authored
      Better TH -> HsSyn conversion
      
      	Merge to stable (attempt)
      
      This commit monad-ises the TH syntax -> HS syntax conversion.
      This means that error messages can be reported in a more civilised
      way.  It also ensures that the entire structure is converted eagerly.
      That means that any exceptions buried inside it are triggered 
      during conversion, and caught by the exception handler in TcSplice.
      Before, they could be triggered later, and looked like comiler
      crashes.
      87998beb
  20. 31 Oct, 2005 1 commit
  21. 27 Oct, 2005 1 commit
    • simonpj's avatar
      [project @ 2005-10-27 14:35:20 by simonpj] · 958924a2
      simonpj authored
      Add a new pragma: SPECIALISE INLINE
      
      This amounts to adding an INLINE pragma to the specialised version
      of the function.  You can add phase stuff too (SPECIALISE INLINE [2]),
      and NOINLINE instead of INLINE.
      
      The reason for doing this is to support inlining of type-directed
      recursive functions.  The main example is this:
      
        -- non-uniform array type
        data Arr e where
          ArrInt  :: !Int -> ByteArray#       -> Arr Int
          ArrPair :: !Int -> Arr e1 -> Arr e2 -> Arr (e1, e2)
      
        (!:) :: Arr e -> Int -> e
        {-# SPECIALISE INLINE (!:) :: Arr Int -> Int -> Int #-}
        {-# SPECIALISE INLINE (!:) :: Arr (a, b) -> Int -> (a, b) #-}
        ArrInt  _ ba    !: (I# i) = I# (indexIntArray# ba i)
        ArrPair _ a1 a2 !: i      = (a1 !: i, a2 !: i)
      
      If we use (!:) at a particular array type, we want to inline (:!),
      which is recursive, until all the type specialisation is done.
      
      
      On the way I did a bit of renaming and tidying of the way that
      pragmas are carried, so quite a lot of files are touched in a
      fairly trivial way.
      958924a2
  22. 14 Oct, 2005 1 commit
    • simonpj's avatar
      [project @ 2005-10-14 11:22:41 by simonpj] · 36436bc6
      simonpj authored
      Add record syntax for GADTs
      	~~~~~~~~~~~~~~~~~~~~~~~~~~~
      
      Atrijus Tang wanted to add record syntax for GADTs and existential
      types, so he and I worked on it a bit at ICFP.  This commit is the
      result.  Now you can say
      
       data T a where
        T1 { x :: a }           	 :: T [a]
        T2 { x :: a, y :: Int } 	 :: T [a]
        forall b. Show b =>
       	T3 { naughty :: b, ok :: Int } :: T Int
        T4 :: Eq a => a -> b -> T (a,b)
      
      Here the constructors are declared using record syntax.
      
      Still to come after this commit:
        - User manual documentation
        - More regression tests
        - Some missing cases in the parser (e.g. T3 won't parse)
      Autrijus is going to do these.
      
      
      Here's a quick summary of the rules.  (Atrijus is going to write
      proper documentation shortly.)
      
      Defnition: a 'vanilla' constructor has a type of the form
      	forall a1..an. t1 -> ... -> tm -> T a1 ... an
      No existentials, no context, nothing.  A constructor declared with
      Haskell-98 syntax is vanilla by construction.  A constructor declared
      with GADT-style syntax is vanilla iff its type looks like the above.
      (In the latter case, the order of the type variables does not matter.)
      
      * You can mix record syntax and non-record syntax in a single decl
      
      * All constructors that share a common field 'x' must have the
        same result type (T [a] in the example).
      
      * You can use field names without restriction in record construction
        and record pattern matching.
      
      * Record *update* only works for data types that only have 'vanilla'
        constructors.
      
      * Consider the field 'naughty', which uses a type variable that does
        not appear in the result type ('b' in the example).  You can use the
        field 'naughty' in pattern matching and construction, but NO
        SELECTOR function is generated for 'naughty'.  [An attempt to use
        'naughty' as a selector function will elicit a helpful error
        message.]
      
      * Data types declared in GADT syntax cannot have a context. So this
      is illegal:
      	data (Monad m) => T a where
      		  ....
      
      * Constructors in GADT syntax can have a context (t.g. T3, T4 above)
        and that context is stored in the constructor and made available
        when the constructor is pattern-matched on.  WARNING: not competely
        implemented yet, but that's the plan.
      
      
      
      Implementation notes
      ~~~~~~~~~~~~~~~~~~~~
      - Data constructors (even vanilla ones) no longer share the type
        variables of their parent type constructor.
      
      - HsDecls.ConDecl has changed quite a bit
      
      - TyCons don't record the field labels and type any more (doesn't
        make sense for existential fields)
      
      - GlobalIdDetails records which selectors are 'naughty', and hence
        don't have real code.
      36436bc6
  23. 06 Oct, 2005 1 commit
  24. 21 Jul, 2005 1 commit
    • simonpj's avatar
      [project @ 2005-07-21 11:05:26 by simonpj] · 5973d067
      simonpj authored
      Arrange that a 'deriving' clause works for a GADT-syntax
      data type delaration, provided it declares a Haskell-98-style
      data type (i.e. no existentials or GADT stuff).
      
      This just allows you to use a different syntax for data type
      declarations without losing 'deriving'. A couple of people requested
      this, and it's really easy to do.
      5973d067
  25. 19 Jul, 2005 1 commit
    • simonpj's avatar
      [project @ 2005-07-19 16:44:50 by simonpj] · a7ecdf96
      simonpj authored
      WARNING: this is a big commit.  You might want 
      	to wait a few days before updating, in case I've 
      	broken something.
      
      	However, if any of the changes are what you wanted,
      	please check it out and test!
      
      This commit does three main things:
      
      1. A re-organisation of the way that GHC handles bindings in HsSyn.
         This has been a bit of a mess for quite a while.  The key new
         types are
      
      	-- Bindings for a let or where clause
      	data HsLocalBinds id
      	  = HsValBinds (HsValBinds id)
      	  | HsIPBinds  (HsIPBinds id)
      	  | EmptyLocalBinds
      
      	-- Value bindings (not implicit parameters)
      	data HsValBinds id
      	  = ValBindsIn  -- Before typechecking
      		(LHsBinds id) [LSig id]	-- Not dependency analysed
      					-- Recursive by default
      
      	  | ValBindsOut	-- After typechecking
      		[(RecFlag, LHsBinds id)]-- Dependency analysed
      
      2. Implement Mark Jones's idea of increasing polymoprhism
         by using type signatures to cut the strongly-connected components
         of a recursive group.  As a consequence, GHC no longer insists
         on the contexts of the type signatures of a recursive group
         being identical.
      
         This drove a significant change: the renamer no longer does dependency
         analysis.  Instead, it attaches a free-variable set to each binding,
         so that the type checker can do the dep anal.  Reason: the typechecker
         needs to do *two* analyses:
      	one to find the true mutually-recursive groups
      		(which we need so we can build the right CoreSyn)
      	one to find the groups in which to typecheck, taking
      		account of type signatures
      
      3. Implement non-ground SPECIALISE pragmas, as promised, and as
         requested by Remi and Ross.  Certainly, this should fix the 
         current problem with GHC, namely that if you have
      	g :: Eq a => a -> b -> b
         then you can now specialise thus
      	SPECIALISE g :: Int -> b -> b
          (This didn't use to work.)
      
         However, it goes further than that.  For example:
      	f :: (Eq a, Ix b) => a -> b -> b
         then you can make a partial specialisation
      	SPECIALISE f :: (Eq a) => a -> Int -> Int
      
          In principle, you can specialise f to *any* type that is
          "less polymorphic" (in the sense of subsumption) than f's 
          actual type.  Such as
      	SPECIALISE f :: Eq a => [a] -> Int -> Int
          But I haven't tested that.
      
          I implemented this by doing the specialisation in the typechecker
          and desugarer, rather than leaving around the strange SpecPragmaIds,
          for the specialiser to find.  Indeed, SpecPragmaIds have vanished 
          altogether (hooray).
      
          Pragmas in general are handled more tidily.  There's a new
          data type HsBinds.Prag, which lives in an AbsBinds, and carries
          pragma info from the typechecker to the desugarer.
      
      
      Smaller things
      
      - The loop in the renamer goes via RnExpr, instead of RnSource.
        (That makes it more like the type checker.)
      
      - I fixed the thing that was causing 'check_tc' warnings to be 
        emitted.
      a7ecdf96
  26. 05 May, 2005 1 commit
    • simonpj's avatar
      [project @ 2005-05-05 07:43:28 by simonpj] · 192c9dd5
      simonpj authored
      Make it so that you can deprecate a data constructor.
      Previously {-# DEPRECATED T "no" #-} referred only to the type
      or class T.  Now it refers to the data constructor T as well,
      just like in fixity declarations.  
      
      There's no way to deprecate the data constructor T without also
      deprecating the type T, alas.  Same problem in fixity decls.
      Main problem is coming up with a suitable concrete syntax to do
      so.
      
      We could consider merging this to the STABLE branch.
      
      NB: Sven, the manual fixes are not XML-valideated!  I'm at home.
      192c9dd5
  27. 04 Apr, 2005 1 commit
    • simonpj's avatar
      [project @ 2005-04-04 11:55:11 by simonpj] · d551dbfe
      simonpj authored
      This commit combines three overlapping things:
      
      1.  Make rebindable syntax work for do-notation. The idea
          here is that, in particular, (>>=) can have a type that
          has class constraints on its argument types, e.g.
             (>>=) :: (Foo m, Baz a) => m a -> (a -> m b) -> m b
          The consequence is that a BindStmt and ExprStmt must have
          individual evidence attached -- previously it was one
          batch of evidence for the entire Do
          
          Sadly, we can't do this for MDo, because we use bind at
          a polymorphic type (to tie the knot), so we still use one
          blob of evidence (now in the HsStmtContext) for MDo.
          
          For arrow syntax, the evidence is in the HsCmd.
          
          For list comprehensions, it's all built-in anyway.
          
          So the evidence on a BindStmt is only used for ordinary
          do-notation.
      
      2.  Tidy up HsSyn.  In particular:
      
      	- Eliminate a few "Out" forms, which we can manage
      	without (e.g. 
      
      	- It ought to be the case that the type checker only
      	decorates the syntax tree, but doesn't change one
      	construct into another.  That wasn't true for NPat,
      	LitPat, NPlusKPat, so I've fixed that.
      
      	- Eliminate ResultStmts from Stmt.  They always had
      	to be the last Stmt, which led to awkward pattern
      	matching in some places; and the benefits didn't seem
      	to outweigh the costs.  Now each construct that uses
      	[Stmt] has a result expression too (e.g. GRHS).
      
      
      3.  Make 'deriving( Ix )' generate a binding for unsafeIndex,
          rather than for index.  This is loads more efficient.
      
          (This item only affects TcGenDeriv, but some of point (2)
          also affects TcGenDeriv, so it has to be in one commit.)
      d551dbfe
  28. 18 Mar, 2005 1 commit
    • simonmar's avatar
      [project @ 2005-03-18 13:37:27 by simonmar] · d1c1b7d0
      simonmar authored
      Flags cleanup.
      
      Basically the purpose of this commit is to move more of the compiler's
      global state into DynFlags, which is moving in the direction we need
      to go for the GHC API which can have multiple active sessions
      supported by a single GHC instance.
      
      Before:
      
      $ grep 'global_var' */*hs | wc -l
           78
      
      After:
      
      $ grep 'global_var' */*hs | wc -l
           27
      
      Well, it's an improvement.  Most of what's left won't really affect
      our ability to host multiple sessions.
      
      Lots of static flags have become dynamic flags (yay!).  Notably lots
      of flags that we used to think of as "driver" flags, like -I and -L,
      are now dynamic.  The most notable static flags left behind are the
      "way" flags, eg. -prof.  It would be nice to fix this, but it isn't
      urgent.
      
      On the way, lots of cleanup has happened.  Everything related to
      static and dynamic flags lives in StaticFlags and DynFlags
      respectively, and they share a common command-line parser library in
      CmdLineParser.  The flags related to modes (--makde, --interactive
      etc.) are now private to the front end: in fact private to Main
      itself, for now.
      d1c1b7d0
  29. 10 Mar, 2005 1 commit
  30. 09 Mar, 2005 2 commits
  31. 23 Feb, 2005 1 commit
    • simonpj's avatar
      [project @ 2005-02-23 13:46:43 by simonpj] · 766c499e
      simonpj authored
      ---------------------------------------------
      	Make type synonyms uniform with data types
      	so far as infix operators are concerned
      	---------------------------------------------
      
      	Merge to STABLE
      
      
      This allows
      
      	type (a :+: b) c d = ...
      
      which was prevented before by accident.
      
      I've also documented the fact that classes can be infix;
      and arranged that class constraints in types can be in infix form.
      	f :: (a :=: b) => ....
      766c499e
  32. 27 Jan, 2005 1 commit
    • simonpj's avatar
      [project @ 2005-01-27 10:44:00 by simonpj] · 508a505e
      simonpj authored
      --------------------------------------------
                Replace hi-boot files with hs-boot files
        	--------------------------------------------
      
      This major commit completely re-organises the way that recursive modules
      are dealt with.
      
        * It should have NO EFFECT if you do not use recursive modules
      
        * It is a BREAKING CHANGE if you do
      
      ====== Warning: .hi-file format has changed, so if you are
      ======		updating into an existing HEAD build, you'll
      ======		need to make clean and re-make
      
      
      The details:  [documentation still to be done]
      
      * Recursive loops are now broken with Foo.hs-boot (or Foo.lhs-boot),
        not Foo.hi-boot
      
      * An hs-boot files is a proper source file.  It is compiled just like
        a regular Haskell source file:
      	ghc Foo.hs		generates Foo.hi, Foo.o
      	ghc Foo.hs-boot		generates Foo.hi-boot, Foo.o-boot
      
      * hs-boot files are precisely a subset of Haskell. In particular:
      	- they have the same import, export, and scoping rules
      	- errors (such as kind errors) in hs-boot files are checked
        You do *not* need to mention the "original" name of something in
        an hs-boot file, any more than you do in any other Haskell module.
      
      * The Foo.hi-boot file generated by compiling Foo.hs-boot is a machine-
        generated interface file, in precisely the same format as Foo.hi
      
      * When compiling Foo.hs, its exports are checked for compatibility with
        Foo.hi-boot (previously generated by compiling Foo.hs-boot)
      
      * The dependency analyser (ghc -M) knows about Foo.hs-boot files, and
        generates appropriate dependencies.  For regular source files it
        generates
      	Foo.o : Foo.hs
      	Foo.o : Baz.hi		-- Foo.hs imports Baz
      	Foo.o : Bog.hi-boot	-- Foo.hs source-imports Bog
      
        For a hs-boot file it generates similar dependencies
      	Bog.o-boot : Bog.hs-boot
      	Bog.o-boot : Nib.hi	-- Bog.hs-boto imports Nib
      
      * ghc -M is also enhanced to use the compilation manager dependency
        chasing, so that
      	ghc -M Main
        will usually do the job.  No need to enumerate all the source files.
      
      * The -c flag is no longer a "compiler mode". It simply means "omit the
        link step", and synonymous with -no-link.
      508a505e
  33. 18 Jan, 2005 1 commit
    • simonpj's avatar
      [project @ 2005-01-18 12:18:11 by simonpj] · ac80e0de
      simonpj authored
      ------------------------
          Reorganisation of hi-boot files
        	------------------------
      
      The main point of this commit is to arrange that in the Compilation
      Manager's dependendency graph, hi-boot files are proper nodes. This
      is important to make sure that we compile everything in the right
      order.  It's a step towards hs-boot files.
      
      * The fundamental change is that CompManager.ModSummary has a new
        field, ms_boot :: IsBootInterface
      
        I also tided up CompManager a bit.  No change to the Basic Plan.
      
        ModSummary is now exported abstractly from CompManager (was concrete)
      
      * Hi-boot files now have import declarations.  The idea is they are
        compulsory, so that the dependency analyser can find them
      
      * I changed an invariant: the Compilation Manager used to ensure that
        hscMain was given a HomePackageTable only for the modules 'below' the
        one being compiled.  This was really only important for instances and
        rules, and it was a bit inconvenient.  So I moved the filter to the
        compiler itself: see HscTypes.hptInstances and hptRules.
      
      * Module Packages.hs now defines
          data PackageIdH
          = HomePackage 		-- The "home" package is the package
       				-- curently being compiled
          | ExtPackage PackageId	-- An "external" package is any other package
      
         It was just a Maybe type before, so this makes it a bit clearer.
      
      * I tried to add a bit better location info to the IfM monad, so that
        errors in interfaces come with a slightly more helpful error message.
        See the if_loc field in TcRnTypes --- and follow-on consequences
      
      * Changed Either to Maybes.MaybeErr in a couple of places (more perspicuous)
      ac80e0de
  34. 14 Jan, 2005 1 commit
    • simonmar's avatar
      [project @ 2005-01-14 17:57:41 by simonmar] · c464eda3
      simonmar authored
      HEADS UP!  You now need to use an up to date Happy from CVS to build
      GHC.  Happy version 1.15 will be released shortly.
      
      Replace the slow hacked up String-based GetImports with one based on
      the real Haskell parser.  This requires a new addition to Happy to
      support parsing partial files.  We now avoid reading each source file
      off the disk twice: once to get its module name and imports, and again
      to parse it.  Instead we just slurp it once, and cache the StringBuffer.
      
      This should result in improved startup times for ghc --make,
      especially when there are lots of source files.
      c464eda3