1. 11 Mar, 2004 1 commit
  2. 30 Dec, 2003 1 commit
  3. 10 Dec, 2003 1 commit
    • simonmar's avatar
      [project @ 2003-12-10 14:15:16 by simonmar] · 55042138
      simonmar authored
      Add accurate source location annotations to HsSyn
      Every syntactic entity in HsSyn is now annotated with a SrcSpan, which
      details the exact beginning and end points of that entity in the
      original source file.  All honest compilers should do this, and it was
      about time GHC did the right thing.
      The most obvious benefit is that we now have much more accurate error
      messages; when running GHC inside emacs for example, the cursor will
      jump to the exact location of an error, not just a line somewhere
      nearby.  We haven't put a huge amount of effort into making sure all
      the error messages are accurate yet, so there could be some tweaking
      still needed, although the majority of messages I've seen have been
      Error messages now contain a column number in addition to the line
      number, eg.
         read001.hs:25:10: Variable not in scope: `+#'
      To get the full text span info, use the new option -ferror-spans.  eg.
         read001.hs:25:10-11: Variable not in scope: `+#'
      I'm not sure whether we should do this by default.  Emacs won't
      understand the new error format, for one thing.
      In a more elaborate editor setting (eg. Visual Studio), we can arrange
      to actually highlight the subexpression containing an error.  Eventually
      this information will be used so we can find elements in the abstract
      syntax corresponding to text locations, for performing high-level editor
      functions (eg. "tell me the type of this expression I just highlighted").
      Performance of the compiler doesn't seem to be adversely affected.
      Parsing is still quicker than in 6.0.1, for example.
      This was an excrutiatingly painful change to make: both Simon P.J. and
      myself have been working on it for the last three weeks or so.  The
      basic changes are:
       - a new datatype SrcSpan, which represents a beginning and end position
         in a source file.
       - To reduce the pain as much as possible, we also defined:
            data Located e = L SrcSpan e
       - Every datatype in HsSyn has an equivalent Located version.  eg.
            type LHsExpr id = Located (HsExpr id)
         and pretty much everywhere we used to use HsExpr we now use
         LHsExpr.  Believe me, we thought about this long and hard, and
         all the other options were worse :-)
      Additional changes/cleanups we made at the same time:
        - The abstract syntax for bindings is now less arcane.  MonoBinds
          and HsBinds with their built-in list constructors have gone away,
          replaced by HsBindGroup and HsBind (see HsSyn/HsBinds.lhs).
        - The various HsSyn type synonyms have now gone away (eg. RdrNameHsExpr,
          RenamedHsExpr, and TypecheckedHsExpr are now HsExpr RdrName,
          HsExpr Name, and HsExpr Id respectively).
        - Utilities over HsSyn are now collected in a new module HsUtils.
          More stuff still needs to be moved in here.
        - MachChar now has a real Char instead of an Int.  All GHC versions that
          can compile GHC now support 32-bit Chars, so this was a simplification.
  4. 27 Oct, 2003 1 commit
  5. 09 Oct, 2003 1 commit
    • simonpj's avatar
      [project @ 2003-10-09 11:58:39 by simonpj] · 98688c6e
      simonpj authored
      		GHC heart/lung transplant
      This major commit changes the way that GHC deals with importing
      types and functions defined in other modules, during renaming and
      typechecking.  On the way I've changed or cleaned up numerous other
      things, including many that I probably fail to mention here.
      Major benefit: GHC should suck in many fewer interface files when
      compiling (esp with -O).  (You can see this with -ddump-rn-stats.)
      It's also some 1500 lines of code shorter than before.
      **	So expect bugs!  I can do a 3-stage bootstrap, and run
      **	the test suite, but you may be doing stuff I havn't tested.
      ** 	Don't update if you are relying on a working HEAD.
      In particular, (a) External Core and (b) GHCi are very little tested.
      	But please, please DO test this version!
      		Big things
      Interface files, version control, and importing declarations
      * There is a totally new data type for stuff that lives in interface files:
      	Original names			IfaceType.IfaceExtName
      	Types				IfaceType.IfaceType
      	Declarations (type,class,id)	IfaceSyn.IfaceDecl
      	Unfoldings			IfaceSyn.IfaceExpr
        (Previously we used HsSyn for type/class decls, and UfExpr for unfoldings.)
        The new data types are in iface/IfaceType and iface/IfaceSyn.  They are
        all instances of Binary, so they can be written into interface files.
        Previous engronkulation concering the binary instance of RdrName has
        gone away -- RdrName is not an instance of Binary any more.  Nor does
        Binary.lhs need to know about the ``current module'' which it used to,
        which made it specialised to GHC.
        A good feature of this is that the type checker for source code doesn't
        need to worry about the possibility that we might be typechecking interface
        file stuff.  Nor does it need to do renaming; we can typecheck direct from
        IfaceSyn, saving a whole pass (module TcIface)
      * Stuff from interface files is sucked in *lazily*, rather than being eagerly
        sucked in by the renamer. Instead, we use unsafeInterleaveIO to capture
        a thunk for the unfolding of an imported function (say).  If that unfolding
        is every pulled on, TcIface will scramble over the unfolding, which may
        in turn pull in the interface files of things mentioned in the unfolding.
        The External Package State is held in a mutable variable so that it
        can be side-effected by this lazy-sucking-in process (which may happen
        way later, e.g. when the simplifier runs).   In effect, the EPS is a kind
        of lazy memo table, filled in as we suck things in.  Or you could think
        of it as a global symbol table, populated on demand.
      * This lazy sucking is very cool, but it can lead to truly awful bugs. The
        intent is that updates to the symbol table happen atomically, but very bad
        things happen if you read the variable for the table, and then force a
        thunk which updates the table.  Updates can get lost that way. I regret
        this subtlety.
        One example of the way it showed up is that the top level of TidyPgm
        (which updates the global name cache) to be much more disciplined about
        those updates, since TidyPgm may itself force thunks which allocate new
      * Version numbering in interface files has changed completely, fixing
        one major bug with ghc --make.  Previously, the version of A.f changed
        only if A.f's type and unfolding was textually different.  That missed
        changes to things that A.f's unfolding mentions; which was fixed by
        eagerly sucking in all of those things, and listing them in the module's
        usage list.  But that didn't work with --make, because they might have
        been already sucked in.
        Now, A.f's version changes if anything reachable from A.f (via interface
        files) changes.  A module with unchanged source code needs recompiling
        only if the versions of any of its free variables changes. [This isn't
        quite right for dictionary functions and rules, which aren't mentioned
        explicitly in the source.  There are extensive comments in module MkIface,
        where all version-handling stuff is done.]
      * We don't need equality on HsDecls any more (because they aren't used in
        interface files).  Instead we have a specialised equality for IfaceSyn
        (eqIfDecl etc), which uses IfaceEq instead of Bool as its result type.
        See notes in IfaceSyn.
      * The horrid bit of the renamer that tried to predict what instance decls
        would be needed has gone entirely.  Instead, the type checker simply
        sucks in whatever instance decls it needs, when it needs them.  Easy!
        Similarly, no need for 'implicitModuleFVs' and 'implicitTemplateHaskellFVs'
        etc.  Hooray!
      Types and type checking
      * Kind-checking of types is far far tidier (new module TcHsTypes replaces
        the badly-named TcMonoType).  Strangely, this was one of my
        original goals, because the kind check for types is the Right Place to
        do type splicing, but it just didn't fit there before.
      * There's a new representation for newtypes in TypeRep.lhs.  Previously
        they were represented using "SourceTypes" which was a funny compromise.
        Now they have their own constructor in the Type datatype.  SourceType
        has turned back into PredType, which is what it used to be.
      * Instance decl overlap checking done lazily.  Consider
      	instance C Int b
      	instance C a Int
        These were rejected before as overlapping, because when seeking
        (C Int Int) one couldn't tell which to use.  But there's no problem when
        seeking (C Bool Int); it can only be the second.
        So instead of checking for overlap when adding a new instance declaration,
        we check for overlap when looking up an Inst.  If we find more than one
        matching instance, we see if any of the candidates dominates the others
        (in the sense of being a substitution instance of all the others);
        and only if not do we report an error.
      	     Medium things
      * The TcRn monad is generalised a bit further.  It's now based on utils/IOEnv.lhs,
        the IO monad with an environment.  The desugarer uses the monad too,
        so that anything it needs can get faulted in nicely.
      * Reduce the number of wired-in things; in particular Word and Integer
        are no longer wired in.  The latter required HsLit.HsInteger to get a
        Type argument.  The 'derivable type classes' data types (:+:, :*: etc)
        are not wired in any more either (see stuff about derivable type classes
      * The PersistentComilerState is now held in a mutable variable
        in the HscEnv.  Previously (a) it was passed to and then returned by
        many top-level functions, which was painful; (b) it was invariably
        accompanied by the HscEnv.  This change tidies up top-level plumbing
        without changing anything important.
      * Derivable type classes are treated much more like 'deriving' clauses.
        Previously, the Ids for the to/from functions lived inside the TyCon,
        but now the TyCon simply records their existence (with a simple boolean).
        Anyone who wants to use them must look them up in the environment.
        This in turn makes it easy to generate the to/from functions (done
        in types/Generics) using HsSyn (like TcGenDeriv for ordinary derivings)
        instead of CoreSyn, which in turn means that (a) we don't have to figure
        out all the type arguments etc; and (b) it'll be type-checked for us.
        Generally, the task of generating the code has become easier, which is
        good for Manuel, who wants to make it more sophisticated.
      * A Name now says what its "parent" is. For example, the parent of a data
        constructor is its type constructor; the parent of a class op is its
        class.  This relationship corresponds exactly to the Avail data type;
        there may be other places we can exploit it.  (I made the change so that
        version comparison in interface files would be a bit easier; but in
        fact it tided up other things here and there (see calls to
        Name.nameParent).  For example, the declaration pool, of declararations
        read from interface files, but not yet used, is now keyed only by the 'main'
        name of the declaration, not the subordinate names.
      * New types OccEnv and OccSet, with the usual operations.
        OccNames can be efficiently compared, because they have uniques, thanks
        to the hashing implementation of FastStrings.
      * The GlobalRdrEnv is now keyed by OccName rather than RdrName.  Not only
        does this halve the size of the env (because we don't need both qualified
        and unqualified versions in the env), but it's also more efficient because
        we can use a UniqFM instead of a FiniteMap.
        Consequential changes to Provenance, which has moved to RdrName.
      * External Core remains a bit of a hack, as it was before, done with a mixture
        of HsDecls (so that recursiveness and argument variance is still inferred),
        and IfaceExprs (for value declarations).  It's not thoroughly tested.
      	     Minor things
      * DataCon fields dcWorkId, dcWrapId combined into a single field
        dcIds, that is explicit about whether the data con is a newtype or not.
        MkId.mkDataConWorkId and mkDataConWrapId are similarly combined into
      * Choosing the boxing strategy is done for *source* type decls only, and
        hence is now in TcTyDecls, not DataCon.
      * WiredIn names are distinguished by their n_sort field, not by their location,
        which was rather strange
      * Define Maybes.mapCatMaybes :: (a -> Maybe b) -> [a] -> [b]
        and use it here and there
      * Much better pretty-printing of interface files (--show-iface)
      Many, many other small things.
      	     File changes
      * New iface/ subdirectory
      * Much of RnEnv has moved to iface/IfaceEnv
      * MkIface and BinIface have moved from main/ to iface/
      * types/Variance has been absorbed into typecheck/TcTyDecls
      * RnHiFiles and RnIfaces have vanished entirely.  Their
        work is done by iface/LoadIface
      * hsSyn/HsCore has gone, replaced by iface/IfaceSyn
      * typecheck/TcIfaceSig has gone, replaced by iface/TcIface
      * typecheck/TcMonoType has been renamed to typecheck/TcHsType
      * basicTypes/Var.hi-boot and basicTypes/Generics.hi-boot have gone altogether
  6. 27 Sep, 2002 1 commit
    • simonpj's avatar
      [project @ 2002-09-27 08:20:43 by simonpj] · dbc254c3
      simonpj authored
              Implement recursive do-notation
      This commit adds recursive do-notation, which Hugs has had for some time.
      	mdo { x <- foo y ;
      	      y <- baz x ;
      	      return (y,x) }
      turns into
      	do { (x,y) <- mfix (\~(x,y) -> do { x <- foo y;
      					    y <- baz x }) ;
      	     return (y,x) }
      This is all based on work by Levent Erkok and John Lanuchbury.
      The really tricky bit is in the renamer (RnExpr.rnMDoStmts) where
      we break things up into minimal segments.  The rest is easy, including
      the type checker.
      Levent laid the groundwork, and Simon finished it off. Needless to say,
      I couldn't resist tidying up other stuff, so there's no guaranteed I
      have not broken something.
  7. 13 Sep, 2002 1 commit
    • simonpj's avatar
      [project @ 2002-09-13 15:02:25 by simonpj] · 9af77fa4
      simonpj authored
      	Make Template Haskell into the HEAD
      This massive commit transfers to the HEAD all the stuff that
      Simon and Tim have been doing on Template Haskell.  The
      meta-haskell-branch is no more!
      WARNING: make sure that you
        * Update your links if you are using link trees.
          Some modules have been added, some have gone away.
        * Do 'make clean' in all library trees.
          The interface file format has changed, and you can
          get strange panics (sadly) if GHC tries to read old interface files:
          e.g.  ghc-5.05: panic! (the `impossible' happened, GHC version 5.05):
      	  Binary.get(TyClDecl): ForeignType
        * You need to recompile the rts too; Linker.c has changed
      However the libraries are almost unaltered; just a tiny change in
      Base, and to the exports in Prelude.
      NOTE: so far as TH itself is concerned, expression splices work
      fine, but declaration splices are not complete.
      		The main change
      The main structural change: renaming and typechecking have to be
      interleaved, because we can't rename stuff after a declaration splice
      until after we've typechecked the stuff before (and the splice
      * Combine the renamer and typecheker monads into one
      	(TcRnMonad, TcRnTypes)
        These two replace TcMonad and RnMonad
      * Give them a single 'driver' (TcRnDriver).  This driver
        replaces TcModule.lhs and Rename.lhs
      * The haskell-src library package has a module
        which defines the Haskell data type seen by the TH programmer.
      * New modules:
      	hsSyn/Convert.hs 	converts THSyntax -> HsSyn
      	deSugar/DsMeta.hs 	converts HsSyn -> THSyntax
      * New module typecheck/TcSplice type-checks Template Haskell splices.
      		Linking stuff
      * ByteCodeLink has been split into
      	ByteCodeLink	(which links)
      	ByteCodeAsm	(which assembles)
      * New module ghci/ObjLink is the object-code linker.
      * compMan/CmLink is removed entirely (was out of place)
        Ditto CmTypes (which was tiny)
      * Linker.c initialises the linker when it is first used (no need to call
        initLinker any more).  Template Haskell makes it harder to know when
        and whether to initialise the linker.
      	Gathering the LIE in the type checker
      * Instead of explicitly gathering constraints in the LIE
      	tcExpr :: RenamedExpr -> TcM (TypecheckedExpr, LIE)
        we now dump the constraints into a mutable varabiable carried
        by the monad, so we get
      	tcExpr :: RenamedExpr -> TcM TypecheckedExpr
        Much less clutter in the code, and more efficient too.
        (Originally suggested by Mark Shields.)
      		Remove "SysNames"
      Because the renamer and the type checker were entirely separate,
      we had to carry some rather tiresome implicit binders (or "SysNames")
      along inside some of the HsDecl data structures.  They were both
      tiresome and fragile.
      Now that the typechecker and renamer are more intimately coupled,
      we can eliminate SysNames (well, mostly... default methods still
      carry something similar).
      		Clean up HsPat
      One big clean up is this: instead of having two HsPat types (InPat and
      OutPat), they are now combined into one.  This is more consistent with
      the way that HsExpr etc is handled; there are some 'Out' constructors
      for the type checker output.
      	HsPat.InPat	--> HsPat.Pat
      	HsPat.OutPat	--> HsPat.Pat
      	No 'pat' type parameter in HsExpr, HsBinds, etc
      	Constructor patterns are nicer now: they use
      	for the three cases of constructor patterns:
      		prefix, infix, and record-bindings
      	The *same* data type HsConDetails is used in the type
      	declaration of the data type (HsDecls.TyData)
      Lots of associated clean-up operations here and there.  Less code.
      Everything is wonderful.
  8. 29 Aug, 2002 1 commit
    • simonmar's avatar
      [project @ 2002-08-29 15:44:11 by simonmar] · ce9687a5
      simonmar authored
        - The main goal is to remove dependencies on hslibs for a
          bootstrapped compiler, leaving only a requirement that the
          packages base, haskell98 and readline are built in stage 1 in
          order to bootstrap.  We're almost there: Posix is still required
          for signal handling, but all other dependencies on hslibs are now
          Uses of Addr and ByteArray/MutableByteArray array are all gone
          from the compiler.  PrimPacked defines the Ptr type for GHC 4.08
          (which didn't have it), and it defines simple BA and MBA types to
          replace uses of ByteArray and MutableByteArray respectively.
        - Clean up import lists.  HsVersions.h now defines macros for some
          modules which have moved between GHC versions.  eg. one now
          imports 'GLAEXTS' to get at unboxed types and primops in the
          Many import lists have been sorted as per the recommendations in
          the new style guidelines in the commentary.
      I've built the compiler with GHC 4.08.2, 5.00.2, 5.02.3, 5.04 and
      itself, and everything still works here.  Doubtless I've got something
      wrong, though.
  9. 10 Jul, 2002 1 commit
  10. 24 May, 2002 1 commit
  11. 29 Apr, 2002 1 commit
    • simonmar's avatar
      [project @ 2002-04-29 14:03:38 by simonmar] · b085ee40
      simonmar authored
      FastString cleanup, stage 1.
      The FastString type is no longer a mixture of hashed strings and
      literal strings, it contains hashed strings only with O(1) comparison
      (except for UnicodeStr, but that will also go away in due course).  To
      create a literal instance of FastString, use FSLIT("..").
      By far the most common use of the old literal version of FastString
      was in the pattern
      	  ptext SLIT("...")
      this combination still works, although it doesn't go via FastString
      any more.  The next stage will be to remove the need to use this
      special combination at all, using a RULE.
      To convert a FastString into an SDoc, now use 'ftext' instead of
      I've also removed all the FAST_STRING related macros from HsVersions.h
      except for SLIT and FSLIT, just use the relevant functions from
      FastString instead.
  12. 14 Mar, 2002 1 commit
  13. 19 Nov, 2001 1 commit
  14. 08 Nov, 2001 1 commit
    • simonmar's avatar
      [project @ 2001-11-08 12:56:00 by simonmar] · 6ae381cd
      simonmar authored
      Updates to the native code generator following the changes to fix the
      large block allocation bug, and changes to use the new
      function-address cache in the register table to reduce code size.
      Also: I changed the pretty-printing machinery for assembly code to use
      Pretty rather than Outputable, since we don't make use of the styles
      and it should improve performance.  Perhaps the same should be done
      for abstract C.
  15. 26 Sep, 2001 1 commit
    • simonpj's avatar
      [project @ 2001-09-26 15:12:33 by simonpj] · e0d750be
      simonpj authored
      		Simon's big commit
      This commit, which I don't think I can sensibly do piecemeal, consists
      of the things I've been doing recently, mainly directed at making
      Manuel, George, and Marcin happier with RULES.
      Reogranise the simplifier
      1. The simplifier's environment is now an explicit parameter.  This
      makes it a bit easier to figure out where it is going.
      2. Constructor arguments can now be arbitrary expressions, except
      when the application is the RHS of a let(rec).  This makes it much
      easier to match rules like
      	    "foo"  f (h x, g y) = f' x y
      In the simplifier, it's Simplify.mkAtomicArgs that ANF-ises a
      constructor application where necessary.  In the occurrence analyser,
      there's a new piece of context info (OccEncl) to say whether a
      constructor app is in a place where it should be in ANF.  (Unless
      it knows this it'll give occurrence info which will inline the
      argument back into the constructor app.)
      3. I'm experimenting with doing the "float-past big lambda" transformation
      in the full laziness pass, rather than mixed in with the simplifier (was
      4.  Arrange that
      	case (coerce (S,T) (x,y)) of ...
      will simplify.  Previous it didn't.
      A local change to CoreUtils.exprIsConApp_maybe.
      5. Do a better job in CoreUtils.exprEtaExpandArity when there's an
      error function in one branch.
      Phase numbers, RULES, and INLINE pragmas
      1.  Phase numbers decrease from N towards zero (instead of increasing).
      This makes it easier to add new earlier phases, which is what users want
      to do.
      2.  RULES get their own phase number, N, and are disabled in phases before N.
      e.g. 	{-# RULES "foo" [2] forall x y.  f (x,y) = f' x y #-}
      Note the [2], which says "only active in phase 2 and later".
      3.  INLINE and NOINLINE pragmas have a phase number to.  This is now treated
      in just the same way as the phase number on RULE; that is, the Id is not inlined
      in phases earlier than N.  In phase N and later the Id *may* be inlined, and
      here is where INLINE and NOINLINE differ: INLNE makes the RHS look small, so
      as soon as it *may* be inlined it probably *will* be inlined.
      The syntax of the phase number on an INLINE/NOINLINE pragma has changed to be
      like the RULES case (i.e. in square brackets).  This should also make sure
      you examine all such phase numbers; many will need to change now the numbering
      is reversed.
      Inlining Ids is no longer affected at all by whether the Id appears on the
      LHS of a rule.  Now it's up to the programmer to put a suitable INLINE/NOINLINE
      pragma to stop it being inlined too early.
      Implementation notes:
      *  A new data type, BasicTypes.Activation says when a rule or inline pragma
      is active.   Functions isAlwaysActive, isNeverActive, isActive, do the
      obvious thing (all in BasicTypes).
      * Slight change in the SimplifierSwitch data type, which led to a lot of
      simplifier-specific code moving from CmdLineOpts to SimplMonad; a Good Thing.
      * The InlinePragma in the IdInfo of an Id is now simply an Activation saying
      when the Id can be inlined.  (It used to be a rather bizarre pair of a
      Bool and a (Maybe Phase), so this is much much easier to understand.)
      * The simplifier has a "mode" environment switch, replacing the old
      black list.  Unfortunately the data type decl has to be in
      CmdLineOpts, because it's an argument to the CoreDoSimplify switch
          data SimplifierMode = SimplGently | SimplPhase Int
      Here "gently" means "no rules, no inlining".   All the crucial
      inlining decisions are now collected together in SimplMonad
      (preInlineUnconditionally, postInlineUnconditionally, activeInline,
      1.  Only dictionary *functions* are made INLINE, not dictionaries that
      have no parameters.  (This inline-dictionary-function thing is Marcin's
      idea and I'm still not sure whether it's a good idea.  But it's definitely
      a Bad Idea when there are no arguments.)
      2.  Be prepared to specialise an INLINE function: an easy fix in
      But there is still a problem, which is that the INLINE wins
      at the call site, so we don't use the specialised version anyway.
      I'm still unsure whether it makes sense to SPECIALISE something
      you want to INLINE.
      Random smaller things
      * builtinRules (there was only one, but may be more) in PrelRules are now
        incorporated.   They were being ignored before...
      * OrdList.foldOL -->  OrdList.foldrOL, OrdList.foldlOL
      * Some tidying up of the tidyOpenTyVar, tidyTyVar functions.  I've
        forgotten exactly what!
  16. 15 Jun, 2001 1 commit
    • simonpj's avatar
      [project @ 2001-06-15 08:29:57 by simonpj] · 972d6442
      simonpj authored
      Some tidying up
      * Remove CmStaticInfo
         - GhciMode moves to HscTypes
         - The package stuff moves to new module main/Packages.lhs
      [put any package-related stuff in the new module]
      * Add Outputable.docToSDoc
  17. 27 Apr, 2001 2 commits
  18. 26 Apr, 2001 1 commit
  19. 26 Feb, 2001 1 commit
    • simonmar's avatar
      [project @ 2001-02-26 15:06:57 by simonmar] · 1c62b517
      simonmar authored
      Implement do-style bindings on the GHCi command line.
      The syntax for a command-line is exactly that of a do statement, with
      the following meanings:
        - `pat <- expr'
          performs expr, and binds each of the variables in pat.
        - `let pat = expr; ...'
          binds each of the variables in pat, doesn't do any evaluation
        - `expr'
          behaves as `it <- expr' if expr is IO-typed, or `let it = expr'
          followed by `print it' otherwise.
  20. 11 Dec, 2000 1 commit
  21. 10 Nov, 2000 1 commit
    • simonpj's avatar
      [project @ 2000-11-10 15:12:50 by simonpj] · f23ba2b2
      simonpj authored
      1.	Outputable.PprStyle now carries a bit more information
      	In particular, the printing style tells whether to print
      	a name in unqualified form.  This used to be embedded in
      	a Name, but since Names now outlive a single compilation unit,
      	that's no longer appropriate.
      	So now the print-unqualified predicate is passed in the printing
      	style, not embedded in the Name.
         2.	I tidied up HscMain a little.  Many of the showPass messages
      	have migraged into the repective pass drivers
  22. 08 Nov, 2000 1 commit
  23. 07 Nov, 2000 1 commit
  24. 07 Aug, 2000 1 commit
    • qrczak's avatar
      [project @ 2000-08-07 23:37:19 by qrczak] · 4b172698
      qrczak authored
      Now Char, Char#, StgChar have 31 bits (physically 32).
      "foo"# is still an array of bytes.
      CharRep represents 32 bits (on a 64-bit arch too). There is also
      Int8Rep, used in those places where bytes were originally meant.
      readCharArray, indexCharOffAddr etc. still use bytes. Storable and
      {I,M}Array use wide Chars.
      In future perhaps all sized integers should be primitive types. Then
      some usages of indexing primops scattered through the code could
      be changed to then-available Int8 ones, and then Char variants of
      primops could be made wide (other usages that handle text should use
      conversion that will be provided later).
      I/O and _ccall_ arguments assume ISO-8859-1. UTF-8 is internally used
      for string literals (only).
      Z-encoding is ready for Unicode identifiers.
      Ranges of intlike and charlike closures are more easily configurable.
      I've probably broken nativeGen/MachCode.lhs:chrCode for Alpha but I
      don't know the Alpha assembler to fix it (what is zapnot?). Generally
      I'm not sure if I've done the NCG changes right.
      This commit breaks the binary compatibility (of course).
      * is* and to{Lower,Upper} in Char (in progress).
      * Libraries for text conversion (in design / experiments),
        to be plugged to I/O and a higher level foreign library.
      * PackedString.
      * StringBuffer and accepting source in encodings other than ISO-8859-1.
  25. 25 May, 2000 1 commit
    • simonpj's avatar
      [project @ 2000-05-25 12:41:14 by simonpj] · 495ef8bd
      simonpj authored
      		Apr/May 2000
      This is a pretty big commit!  It adds stuff I've been working on
      over the last month or so.  DO NOT MERGE IT WITH 4.07!
      Interface file formats have changed a little; you'll need
      to make clean before remaking.
      						Simon PJ
      Recompilation checking
      Substantial improvement in recompilation checking.  The version management
      is now entirely internal to GHC.  ghc-iface.lprl is dead!
      The trick is to generate the new interface file in two steps:
        - first convert Types etc to HsTypes etc, and thereby
      	build a new ParsedIface
        - then compare against the parsed (but not renamed) version of the old
      	interface file
      Doing this meant adding code to convert *to* HsSyn things, and to
      compare HsSyn things for equality.  That is the main tedious bit.
      Another improvement is that we now track version info for
      fixities and rules, which was missing before.
      Interface file reading
      Make interface files reading more robust.
        * If the old interface file is unreadable, don't fail. [bug fix]
        * If the old interface file mentions interfaces
          that are unreadable, don't fail. [bug fix]
        * When we can't find the interface file,
          print the directories we are looking in.  [feature]
      Type signatures
        * New flag -ddump-types to print type signatures
      Type pruning
      When importing
      	data T = T1 A | T2 B | T3 C
      it seems excessive to import the types A, B, C as well, unless
      the constructors T1, T2 etc are used.  A,B,C might be more types,
      and importing them may mean reading more interfaces, and so on.
       So the idea is that the renamer will just import the decl
      	data T
      unless one of the constructors is used.  This turns out to be quite
      easy to implement.  The downside is that we must make sure the
      constructors are always available if they are really needed, so
      I regard this as an experimental feature.
      Elimininate ThinAir names
      Eliminate ThinAir.lhs and all its works.  It was always a hack, and now
      the desugarer carries around an environment I think we can nuke ThinAir
      As part of this, I had to move all the Prelude RdrName defns from PrelInfo
      to PrelMods --- so I renamed PrelMods as PrelNames.
      I also had to move the builtinRules so that they are injected by the renamer
      (rather than appearing out of the blue in SimplCore).  This is if anything simpler.
      * Tidy up the data types involved in Rules
      * Eliminate RnEnv.better_provenance; use Name.hasBetterProv instead
      * Add Unique.hasKey :: Uniquable a => a -> Unique -> Bool
        It's useful in a lot of places
      * Fix a bug in interface file parsing for __U[!]
  26. 03 Apr, 2000 2 commits
    • simonpj's avatar
      [project @ 2000-04-03 16:46:41 by simonpj] · 6f531423
      simonpj authored
      * Minor wibble to type checker error message
      * Make error messages come out to stderr (I'd switched
        to stdout temporarily when fighting the Dreaded Stderr Bug
        and forgot to change back)
    • simonpj's avatar
      [project @ 2000-04-03 09:52:28 by simonpj] · e4b0fab5
      simonpj authored
      * Make it so that recursive newtype declarations don't send
        GHC into an infinite loop.
      	newtype T = MkT T
        This happened because Type.repType looked throught newtypes,
        and that never stopped!  Now TcTyDecls.mkNewTyConRep does the job
        more carefully, and the result is cached in the TyCon itself.
      * Improve the handling of type signatures & pragmas.  Previously a
        mis-placed (say) SPECIALISE instance pragmas could be silently
      Both these changes involved moving quite a lot of stuff between modules.
  27. 23 Mar, 2000 1 commit
    • simonpj's avatar
      [project @ 2000-03-23 17:45:17 by simonpj] · 111cee3f
      simonpj authored
      This utterly gigantic commit is what I've been up to in background
      mode in the last couple of months.  Originally the main goal
      was to get rid of Con (staturated constant applications)
      in the CoreExpr type, but one thing led to another, and I kept
      postponing actually committing.   Sorry.
      	Simon, 23 March 2000
      I've tested it pretty thoroughly, but doubtless things will break.
      Here are the highlights
      * Con is gone; the CoreExpr type is simpler
      * NoRepLits have gone
      * Better usage info in interface files => less recompilation
      * Result type signatures work
      * CCall primop is tidied up
      * Constant folding now done by Rules
      * Lots of hackery in the simplifier
      * Improvements in CPR and strictness analysis
      Many bug fixes including
      * Sergey's DoCon compiles OK; no loop in the strictness analyser
      * Volker Wysk's programs don't crash the CPR analyser
      I have not done much on measuring compilation times and binary sizes;
      they could have got worse.  I think performance has got significantly
      better, though, in most cases.
      Removing the Con form of Core expressions
      The big thing is that
        For every constructor C there are now *two* Ids:
      	C is the constructor's *wrapper*. It evaluates and unboxes arguments
      	before calling $wC.  It has a perfectly ordinary top-level defn
      	in the module defining the data type.
      	$wC is the constructor's *worker*.  It is like a primop that simply
      	allocates and builds the constructor value.  Its arguments are the
      	actual representation arguments of the constructor.
      	Its type may be different to C, because:
      		- useless dict args are dropped
      		- strict args may be flattened
        For every primop P there is *one* Id, its (curried) Id
        Neither contructor worker Id nor the primop Id have a defminition anywhere.
        Instead they are saturated during the core-to-STG pass, and the code generator
        generates code for them directly. The STG language still has saturated
        primops and constructor applications.
      * The Const type disappears, along with Const.lhs.  The literal part
        of Const.lhs reappears as Literal.lhs.  Much tidying up in here,
        to bring all the range checking into this one module.
      * I got rid of NoRep literals entirely.  They just seem to be too much trouble.
      * Because Con's don't exist any more, the funny C { args } syntax
        disappears from inteface files.
      * Result type signatures now work
      	f :: Int -> Int = \x -> x
      	-- The Int->Int is the type of f
      	g x y :: Int = x+y
      	-- The Int is the type of the result of (g x y)
      Recompilation checking and make
      * The .hi file for a modules is not touched if it doesn't change.  (It used to
        be touched regardless, forcing a chain of recompilations.)  The penalty for this
        is that we record exported things just as if they were mentioned in the body of
        the module.  And the penalty for that is that we may recompile a module when
        the only things that have changed are the things it is passing on without using.
        But it seems like a good trade.
      * -recomp is on by default
      Foreign declarations
      * If you say
      	foreign export zoo :: Int -> IO Int
        then you get a C produre called 'zoo', not 'zzoo' as before.
        I've also added a check that complains if you export (or import) a C
        procedure whose name isn't legal C.
      Code generation and labels
      * Now that constructor workers and wrappers have distinct names, there's
        no need to have a Foo_static_closure and a Foo_closure for constructor Foo.
        I nuked the entire StaticClosure story.  This has effects in some of
        the RTS headers (i.e. s/static_closure/closure/g)
      Rules, constant folding
      * Constant folding becomes just another rewrite rule, attached to the Id for the
        PrimOp.   To achieve this, there's a new form of Rule, a BuiltinRule (see CoreSyn.lhs).
        The prelude rules are in prelude/PrelRules.lhs, while simplCore/ConFold.lhs has gone.
      * Appending of constant strings now works, using fold/build fusion, plus
        the rewrite rule
      	unpack "foo" c (unpack "baz" c n)  =  unpack "foobaz" c n
        Implemented in PrelRules.lhs
      * The CCall primop is tidied up quite a bit.  There is now a data type CCall,
        defined in PrimOp, that packages up the info needed for a particular CCall.
        There is a new Id for each new ccall, with an big "occurrence name"
      	{__ccall "foo" gc Int# -> Int#}
        In interface files, this is parsed as a single Id, which is what it is, really.
      * There were numerous places where the host compiler's
        minInt/maxInt was being used as the target machine's minInt/maxInt.
        I nuked all of these; everything is localised to inIntRange and inWordRange,
        in Literal.lhs
      * Desugaring record updates was broken: it didn't generate correct matches when
        used withe records with fancy unboxing etc.  It now uses matchWrapper.
      * Significant tidying up in codeGen/SMRep.lhs
      * Add __word, __word64, __int64 terminals to signal the obvious types
        in interface files.  Add the ability to print word values in hex into
        C code.
      * PrimOp.lhs is no longer part of a loop.  Remove PrimOp.hi-boot*
      * isProductTyCon no longer returns False for recursive products, nor
        for unboxed products; you have to test for these separately.
        There's no reason not to do CPR for recursive product types, for example.
        Ditto splitProductType_maybe.
      * New -fno-case-of-case flag for the simplifier.  We use this in the first run
        of the simplifier, where it helps to stop messing up expressions that
        the (subsequent) full laziness pass would otherwise find float out.
        It's much more effective than previous half-baked hacks in inlining.
        Actually, it turned out that there were three places in Simplify.lhs that
        needed to know use this flag.
      * Make the float-in pass push duplicatable bindings into the branches of
        a case expression, in the hope that we never have to allocate them.
        (see FloatIn.sepBindsByDropPoint)
      * Arrange that top-level bottoming Ids get a NOINLINE pragma
        This reduced gratuitous inlining of error messages.
        But arrange that such things still get w/w'd.
      * Arrange that a strict argument position is regarded as an 'interesting'
        context, so that if we see
      	foldr k z (g x)
        then we'll be inclined to inline g; this can expose a build.
      * There was a missing case in CoreUtils.exprEtaExpandArity that meant
        we were missing some obvious cases for eta expansion
        Also improve the code when handling applications.
      * Make record selectors (identifiable by their IdFlavour) into "cheap" operations.
      	  [The change is a 2-liner in CoreUtils.exprIsCheap]
        This means that record selection may be inlined into function bodies, which
        greatly improves the arities of overloaded functions.
      * Make a cleaner job of inlining "lone variables".  There was some distributed
        cunning, but I've centralised it all now in SimplUtils.analyseCont, which
        analyses the context of a call to decide whether it is "interesting".
      * Don't specialise very small functions in Specialise.specDefn
        It's better to inline it.  Rather like the worker/wrapper case.
      * Be just a little more aggressive when floating out of let rhss.
        See comments with Simplify.wantToExpose
        A small change with an occasional big effect.
      * Make the inline-size computation think that
      	case x of I# x -> ...
        is *free*.
      CPR analysis
      * Fix what was essentially a bug in CPR analysis.  Consider
      	letrec f x = let g y = let ... in f e1
      		     if ... then (a,b) else g x
        g has the CPR property if f does; so when generating the final annotated
        RHS for f, we must use an envt in which f is bound to its final abstract
        value.  This wasn't happening.  Instead, f was given the CPR tag but g
        wasn't; but of course the w/w pass gives rotten results in that case!!
        (Because f's CPR-ness relied on g's.)
        On they way I tidied up the code in CprAnalyse.  It's quite a bit shorter.
        The fact that some data constructors return a constructed product shows
        up in their CPR info (MkId.mkDataConId) not in CprAnalyse.lhs
      Strictness analysis and worker/wrapper
      * BIG THING: pass in the demand to StrictAnal.saExpr.  This affects situations
      	f (let x = e1 in (x,x))
        where f turns out to have strictness u(SS), say.  In this case we can
        mark x as demanded, and use a case expression for it.
        The situation before is that we didn't "know" that there is the u(SS)
        demand on the argument, so we simply computed that the body of the let
        expression is lazy in x, and marked x as lazily-demanded.  Then even after
        f was w/w'd we got
      	let x = e1 in case (x,x) of (a,b) -> $wf a b
        and hence
      	let x = e1 in $wf a b
        I found a much more complicated situation in spectral/sphere/Main.shade,
        which improved quite a bit with this change.
      * Moved the StrictnessInfo type from IdInfo to Demand.  It's the logical
        place for it, and helps avoid module loops
      * Do worker/wrapper for coerces even if the arity is zero.  Thus:
      	stdout = coerce Handle (..blurg..)
      	wibble = (...blurg...)
      	stdout = coerce Handle wibble
        This is good because I found places where we were saying
      	case coerce t stdout of { MVar a ->
      	case coerce t stdout of { MVar b ->
        and the redundant case wasn't getting eliminated because of the coerce.
  28. 02 Mar, 2000 1 commit
    • lewie's avatar
      [project @ 2000-03-02 22:51:30 by lewie] · f0a01a1f
      lewie authored
      Further refine and fix how `with' partitions the LIE.  Also moved the
      partitioning function from Inst to TcSimplify.  Fixed layout bug with
      `with'.  Fixed another wibble w/ importing defs w/ implicit params.
      Make 4-tuples outputable (a convenience in debugging measure).
  29. 11 Feb, 2000 1 commit
  30. 06 Dec, 1999 1 commit
    • simonpj's avatar
      [project @ 1999-12-06 10:50:29 by simonpj] · 81253051
      simonpj authored
      Change printDump so that it prints in user style by default.
      This means that (eg) -ddump-simpl output is much more readable...
      but you may get confused by variables that look the same but aren't.
      To recover the previous behaviour use -dppr-debug
      This change only affects compiler hackers; let me know if it
      has any good or bad effects.
  31. 13 Oct, 1999 1 commit
    • simonmar's avatar
      [project @ 1999-10-13 16:39:10 by simonmar] · 5c67176d
      simonmar authored
      Crude allocation-counting extension to ticky-ticky profiling.
      Allocations are counted against the closest lexically enclosing
      function closure, so you need to map the output back to the STG code.
  32. 18 May, 1999 1 commit
  33. 24 Mar, 1999 1 commit
  34. 10 Feb, 1999 1 commit
  35. 27 Jan, 1999 1 commit
    • simonpj's avatar
      [project @ 1999-01-27 14:51:14 by simonpj] · 18976e61
      simonpj authored
      Finally!  This commits the ongoing saga of Simon's hygiene sweep
      a) The 'unused variable' warnings from the renamer work.  
      b) Better error messages here and there, esp type checker
      c) Fixities for Haskell 98 (maybe I'd done that before)
      d) Lazy reporting of name clashes for Haskell 98 (ditto)
      a) type OccName has its own module.  OccNames are represented
         by a single FastString, not three as in the last round.  This
         string is held in Z-encoded form; a decoding function decodes
         for printing in user error messages.  There's a nice tight
         encoding for (,,,,,,,,,,,,,,,,,,,,,,,,,,,,,)
      b) type Module is a proper ADT, in module OccName
      c) type RdrName is a proper ADT, in its own module
      d) type Name has a new, somwhat tidier, representation
      e) much grunting in the renamer to get Provenances right.
         This makes error messages look better (no spurious qualifiers)
  36. 07 Jan, 1999 2 commits
  37. 18 Dec, 1998 1 commit
    • simonpj's avatar
      [project @ 1998-12-18 17:40:31 by simonpj] · 7e602b0a
      simonpj authored
      Another big commit from Simon.  Actually, the last one
      didn't all go into the main trunk; because of a CVS glitch it
      ended up in the wrong branch.
      So this commit includes:
      * Scoped type variables
      * Warnings for unused variables should work now (they didn't before)
      * Simplifier improvements:
      	- Much better treatment of strict arguments
      	- Better treatment of bottoming Ids
      	- No need for w/w split for fns that are merely strict
      	- Fewer iterations needed, I hope
      * Less gratuitous renaming in interface files and abs C
      * OccName is a separate module, and is an abstract data type
      I think the whole Prelude and Exts libraries compile correctly.
      Something isn't quite right about typechecking existentials though.