GitLab

Thu Aug  3 19:29:38 EDT 2006  Manuel M T Chakravarty <chak@cse.unsw.edu.au>
  * Added error checks & fixed bugs

Tue Aug  1 23:51:38 EDT 2006  Manuel M T Chakravarty <chak@cse.unsw.edu.au>
  * Renaming of indexed types

Tue Aug  1 16:39:51 EDT 2006  Manuel M T Chakravarty <chak@cse.unsw.edu.au>
  * Renaming of kind signatures (rnTySig)

Wed Jul 26 18:16:25 EDT 2006  Manuel M T Chakravarty <chak@cse.unsw.edu.au>
  * Fix migrated AT support
  - Make it compile
  - Successfully parses and renames simple AT declarations
  - Should not affect non-AT programs

Wed Jul 26 17:46:55 EDT 2006  Manuel M T Chakravarty <chak@cse.unsw.edu.au>
  * Migrate cvs diff from fptools-assoc branch
  - Syntactic support for associated types
  - Renamer support for associated types
  - ATs are only allowed with -fglasgow-exts
  - Handle ATs in the type and class declaration kinding knot-tying exercise

Previously we checked the form of the arguments of a RULE lhs, to 
ensure that they were simple applications. There was no good reason
for that, save to prevent you writing LHSs that were unlikely to match.

And Don Stewart found he wanted to do something we didn't allow (a section,
I think).  So I have just disabled the check.

See #815

Consider
  class C a where
    op :: forall b. a -> b -> b
    op = <rhs>

Then 'b' should be in scope in <rhs>.  I had omitted this case.
This patch fixes it.

Most of the other users of the fptools build system have migrated to
Cabal, and with the move to darcs we can now flatten the source tree
without losing history, so here goes.

The main change is that the ghc/ subdir is gone, and most of what it
contained is now at the top level.  The build system now makes no
pretense at being multi-project, it is just the GHC build system.

No doubt this will break many things, and there will be a period of
instability while we fix the dependencies.  A straightforward build
should work, but I haven't yet fixed binary/source distributions.
Changes to the Building Guide will follow, too.

Add a new pragma: SPECIALISE INLINE

This amounts to adding an INLINE pragma to the specialised version
of the function.  You can add phase stuff too (SPECIALISE INLINE [2]),
and NOINLINE instead of INLINE.

The reason for doing this is to support inlining of type-directed
recursive functions.  The main example is this:

  -- non-uniform array type
  data Arr e where
    ArrInt  :: !Int -> ByteArray#       -> Arr Int
    ArrPair :: !Int -> Arr e1 -> Arr e2 -> Arr (e1, e2)

  (!:) :: Arr e -> Int -> e
  {-# SPECIALISE INLINE (!:) :: Arr Int -> Int -> Int #-}
  {-# SPECIALISE INLINE (!:) :: Arr (a, b) -> Int -> (a, b) #-}
  ArrInt  _ ba    !: (I# i) = I# (indexIntArray# ba i)
  ArrPair _ a1 a2 !: i      = (a1 !: i, a2 !: i)

If we use (!:) at a particular array type, we want to inline (:!),
which is recursive, until all the type specialisation is done.


On the way I did a bit of renaming and tidying of the way that
pragmas are carried, so quite a lot of files are touched in a
fairly trivial way.

MERGE TO STABLE

Fix two small Template Haskell bugs.

(1) A bug in the renaming of [d| brackets |].  The problem was
that when we renamed the bracket we messed up the name cache, because
the module was still that of the parent module.  Now we set a fake
module before renaming it.

TH_spliceDecl4 is the test.

(2) An expression splice can in principle mention *any* variable,
so the renamer really has to assume that it does when doing depdendency
analysis.  For example
	f = ...
	h = ...$(thing "f")...
The renamer had better not put 'h' before 'f', else the type checker
won't find a defn for 'f' in the type envt.

TH_spliceE5 is the test

Add record syntax for GADTs
	~~~~~~~~~~~~~~~~~~~~~~~~~~~

Atrijus Tang wanted to add record syntax for GADTs and existential
types, so he and I worked on it a bit at ICFP.  This commit is the
result.  Now you can say

 data T a where
  T1 { x :: a }           	 :: T [a]
  T2 { x :: a, y :: Int } 	 :: T [a]
  forall b. Show b =>
 	T3 { naughty :: b, ok :: Int } :: T Int
  T4 :: Eq a => a -> b -> T (a,b)

Here the constructors are declared using record syntax.

Still to come after this commit:
  - User manual documentation
  - More regression tests
  - Some missing cases in the parser (e.g. T3 won't parse)
Autrijus is going to do these.


Here's a quick summary of the rules.  (Atrijus is going to write
proper documentation shortly.)

Defnition: a 'vanilla' constructor has a type of the form
	forall a1..an. t1 -> ... -> tm -> T a1 ... an
No existentials, no context, nothing.  A constructor declared with
Haskell-98 syntax is vanilla by construction.  A constructor declared
with GADT-style syntax is vanilla iff its type looks like the above.
(In the latter case, the order of the type variables does not matter.)

* You can mix record syntax and non-record syntax in a single decl

* All constructors that share a common field 'x' must have the
  same result type (T [a] in the example).

* You can use field names without restriction in record construction
  and record pattern matching.

* Record *update* only works for data types that only have 'vanilla'
  constructors.

* Consider the field 'naughty', which uses a type variable that does
  not appear in the result type ('b' in the example).  You can use the
  field 'naughty' in pattern matching and construction, but NO
  SELECTOR function is generated for 'naughty'.  [An attempt to use
  'naughty' as a selector function will elicit a helpful error
  message.]

* Data types declared in GADT syntax cannot have a context. So this
is illegal:
	data (Monad m) => T a where
		  ....

* Constructors in GADT syntax can have a context (t.g. T3, T4 above)
  and that context is stored in the constructor and made available
  when the constructor is pattern-matched on.  WARNING: not competely
  implemented yet, but that's the plan.



Implementation notes
~~~~~~~~~~~~~~~~~~~~
- Data constructors (even vanilla ones) no longer share the type
  variables of their parent type constructor.

- HsDecls.ConDecl has changed quite a bit

- TyCons don't record the field labels and type any more (doesn't
  make sense for existential fields)

- GlobalIdDetails records which selectors are 'naughty', and hence
  don't have real code.

WARNING: this is a big commit.  You might want 
	to wait a few days before updating, in case I've 
	broken something.

	However, if any of the changes are what you wanted,
	please check it out and test!

This commit does three main things:

1. A re-organisation of the way that GHC handles bindings in HsSyn.
   This has been a bit of a mess for quite a while.  The key new
   types are

	-- Bindings for a let or where clause
	data HsLocalBinds id
	  = HsValBinds (HsValBinds id)
	  | HsIPBinds  (HsIPBinds id)
	  | EmptyLocalBinds

	-- Value bindings (not implicit parameters)
	data HsValBinds id
	  = ValBindsIn  -- Before typechecking
		(LHsBinds id) [LSig id]	-- Not dependency analysed
					-- Recursive by default

	  | ValBindsOut	-- After typechecking
		[(RecFlag, LHsBinds id)]-- Dependency analysed

2. Implement Mark Jones's idea of increasing polymoprhism
   by using type signatures to cut the strongly-connected components
   of a recursive group.  As a consequence, GHC no longer insists
   on the contexts of the type signatures of a recursive group
   being identical.

   This drove a significant change: the renamer no longer does dependency
   analysis.  Instead, it attaches a free-variable set to each binding,
   so that the type checker can do the dep anal.  Reason: the typechecker
   needs to do *two* analyses:
	one to find the true mutually-recursive groups
		(which we need so we can build the right CoreSyn)
	one to find the groups in which to typecheck, taking
		account of type signatures

3. Implement non-ground SPECIALISE pragmas, as promised, and as
   requested by Remi and Ross.  Certainly, this should fix the 
   current problem with GHC, namely that if you have
	g :: Eq a => a -> b -> b
   then you can now specialise thus
	SPECIALISE g :: Int -> b -> b
    (This didn't use to work.)

   However, it goes further than that.  For example:
	f :: (Eq a, Ix b) => a -> b -> b
   then you can make a partial specialisation
	SPECIALISE f :: (Eq a) => a -> Int -> Int

    In principle, you can specialise f to *any* type that is
    "less polymorphic" (in the sense of subsumption) than f's 
    actual type.  Such as
	SPECIALISE f :: Eq a => [a] -> Int -> Int
    But I haven't tested that.

    I implemented this by doing the specialisation in the typechecker
    and desugarer, rather than leaving around the strange SpecPragmaIds,
    for the specialiser to find.  Indeed, SpecPragmaIds have vanished 
    altogether (hooray).

    Pragmas in general are handled more tidily.  There's a new
    data type HsBinds.Prag, which lives in an AbsBinds, and carries
    pragma info from the typechecker to the desugarer.


Smaller things

- The loop in the renamer goes via RnExpr, instead of RnSource.
  (That makes it more like the type checker.)

- I fixed the thing that was causing 'check_tc' warnings to be 
  emitted.

Make it so that you can deprecate a data constructor.
Previously {-# DEPRECATED T "no" #-} referred only to the type
or class T.  Now it refers to the data constructor T as well,
just like in fixity declarations.  

There's no way to deprecate the data constructor T without also
deprecating the type T, alas.  Same problem in fixity decls.
Main problem is coming up with a suitable concrete syntax to do
so.

We could consider merging this to the STABLE branch.

NB: Sven, the manual fixes are not XML-valideated!  I'm at home.

Flags cleanup.

Basically the purpose of this commit is to move more of the compiler's
global state into DynFlags, which is moving in the direction we need
to go for the GHC API which can have multiple active sessions
supported by a single GHC instance.

Before:

$ grep 'global_var' */*hs | wc -l
     78

After:

$ grep 'global_var' */*hs | wc -l
     27

Well, it's an improvement.  Most of what's left won't really affect
our ability to host multiple sessions.

Lots of static flags have become dynamic flags (yay!).  Notably lots
of flags that we used to think of as "driver" flags, like -I and -L,
are now dynamic.  The most notable static flags left behind are the
"way" flags, eg. -prof.  It would be nice to fix this, but it isn't
urgent.

On the way, lots of cleanup has happened.  Everything related to
static and dynamic flags lives in StaticFlags and DynFlags
respectively, and they share a common command-line parser library in
CmdLineParser.  The flags related to modes (--makde, --interactive
etc.) are now private to the front end: in fact private to Main
itself, for now.

Import trimming

--------------------------------------------
          Replace hi-boot files with hs-boot files
  	--------------------------------------------

This major commit completely re-organises the way that recursive modules
are dealt with.

  * It should have NO EFFECT if you do not use recursive modules

  * It is a BREAKING CHANGE if you do

====== Warning: .hi-file format has changed, so if you are
======		updating into an existing HEAD build, you'll
======		need to make clean and re-make


The details:  [documentation still to be done]

* Recursive loops are now broken with Foo.hs-boot (or Foo.lhs-boot),
  not Foo.hi-boot

* An hs-boot files is a proper source file.  It is compiled just like
  a regular Haskell source file:
	ghc Foo.hs		generates Foo.hi, Foo.o
	ghc Foo.hs-boot		generates Foo.hi-boot, Foo.o-boot

* hs-boot files are precisely a subset of Haskell. In particular:
	- they have the same import, export, and scoping rules
	- errors (such as kind errors) in hs-boot files are checked
  You do *not* need to mention the "original" name of something in
  an hs-boot file, any more than you do in any other Haskell module.

* The Foo.hi-boot file generated by compiling Foo.hs-boot is a machine-
  generated interface file, in precisely the same format as Foo.hi

* When compiling Foo.hs, its exports are checked for compatibility with
  Foo.hi-boot (previously generated by compiling Foo.hs-boot)

* The dependency analyser (ghc -M) knows about Foo.hs-boot files, and
  generates appropriate dependencies.  For regular source files it
  generates
	Foo.o : Foo.hs
	Foo.o : Baz.hi		-- Foo.hs imports Baz
	Foo.o : Bog.hi-boot	-- Foo.hs source-imports Bog

  For a hs-boot file it generates similar dependencies
	Bog.o-boot : Bog.hs-boot
	Bog.o-boot : Nib.hi	-- Bog.hs-boto imports Nib

* ghc -M is also enhanced to use the compilation manager dependency
  chasing, so that
	ghc -M Main
  will usually do the job.  No need to enumerate all the source files.

* The -c flag is no longer a "compiler mode". It simply means "omit the
  link step", and synonymous with -no-link.

Fix a bug in fixity handling for tycons; we were rembering the data-con RdrName, not the tycon one

---------------------------------
	Fix a bug in usage recording
	---------------------------------

As a result of the new stuff on hi-boot-file consistency checking, I
accidentally caused Foo.hi to record a usage line for module Foo, and
this in turn caused rather nasty bad things to happen.  In particular,
there were occasional crashes of form

ghc-6.3: panic! (the `impossible' happened, GHC version 6.3.20041017):
        forkM Constructor Var.TcTyVar{d r1B9}

At least I think that's why the crash happened.

Anyway, it was certainly a bug, and this commit fixes it.  The main
payload of this fix is in Desugar.lhs;  the rest is comments and
tidying.

Allow kind signatures in GADT data type declarations

------------------------------------
	Add Generalised Algebraic Data Types
	------------------------------------

This rather big commit adds support for GADTs.  For example,

    data Term a where
 	  Lit :: Int -> Term Int
	  App :: Term (a->b) -> Term a -> Term b
	  If  :: Term Bool -> Term a -> Term a
	  ..etc..

    eval :: Term a -> a
    eval (Lit i) = i
    eval (App a b) = eval a (eval b)
    eval (If p q r) | eval p    = eval q
    		    | otherwise = eval r


Lots and lots of of related changes throughout the compiler to make
this fit nicely.

One important change, only loosely related to GADTs, is that skolem
constants in the typechecker are genuinely immutable and constant, so
we often get better error messages from the type checker.  See
TcType.TcTyVarDetails.

There's a new module types/Unify.lhs, which has purely-functional
unification and matching for Type. This is used both in the typechecker
(for type refinement of GADTs) and in Core Lint (also for type refinement).

Extend the "newtype deriving" feature a little bit more
(at the request of Wolfgang Jeltsch)

Here's the example:
    class C a b
    instance C [a] Char
    newtype T = T Char deriving( C [a] )

Perfectly sensible, and no reason it should not work.
Fixing this required me to generalise the abstract syntax of
a 'deriving' item, hence the non-local effects.

--------------------
	Towards type splices
	--------------------

Starts the move to supporting type splices, by making
HsExpr.HsSplice a separate type of its own, and adding
HsSpliceTy constructor to HsType.

fix bogosity spotted by -Wall

Add accurate source location annotations to HsSyn
-------------------------------------------------

Every syntactic entity in HsSyn is now annotated with a SrcSpan, which
details the exact beginning and end points of that entity in the
original source file.  All honest compilers should do this, and it was
about time GHC did the right thing.

The most obvious benefit is that we now have much more accurate error
messages; when running GHC inside emacs for example, the cursor will
jump to the exact location of an error, not just a line somewhere
nearby.  We haven't put a huge amount of effort into making sure all
the error messages are accurate yet, so there could be some tweaking
still needed, although the majority of messages I've seen have been
spot-on.

Error messages now contain a column number in addition to the line
number, eg.

   read001.hs:25:10: Variable not in scope: `+#'

To get the full text span info, use the new option -ferror-spans.  eg.

   read001.hs:25:10-11: Variable not in scope: `+#'

I'm not sure whether we should do this by default.  Emacs won't
understand the new error format, for one thing.

In a more elaborate editor setting (eg. Visual Studio), we can arrange
to actually highlight the subexpression containing an error.  Eventually
this information will be used so we can find elements in the abstract
syntax corresponding to text locations, for performing high-level editor
functions (eg. "tell me the type of this expression I just highlighted").

Performance of the compiler doesn't seem to be adversely affected.
Parsing is still quicker than in 6.0.1, for example.

Implementation:

This was an excrutiatingly painful change to make: both Simon P.J. and
myself have been working on it for the last three weeks or so.  The
basic changes are:

 - a new datatype SrcSpan, which represents a beginning and end position
   in a source file.

 - To reduce the pain as much as possible, we also defined:

      data Located e = L SrcSpan e

 - Every datatype in HsSyn has an equivalent Located version.  eg.

      type LHsExpr id = Located (HsExpr id)

   and pretty much everywhere we used to use HsExpr we now use
   LHsExpr.  Believe me, we thought about this long and hard, and
   all the other options were worse :-)


Additional changes/cleanups we made at the same time:

  - The abstract syntax for bindings is now less arcane.  MonoBinds
    and HsBinds with their built-in list constructors have gone away,
    replaced by HsBindGroup and HsBind (see HsSyn/HsBinds.lhs).

  - The various HsSyn type synonyms have now gone away (eg. RdrNameHsExpr,
    RenamedHsExpr, and TypecheckedHsExpr are now HsExpr RdrName,
    HsExpr Name, and HsExpr Id respectively).

  - Utilities over HsSyn are now collected in a new module HsUtils.
    More stuff still needs to be moved in here.

  - MachChar now has a real Char instead of an Int.  All GHC versions that
    can compile GHC now support 32-bit Chars, so this was a simplification.

------------------------------------
	Major increment for Template Haskell
	------------------------------------

1.  New abstract data type "Name" which appears where String used to be.
    E.g. 	data Exp = VarE Name | ...

2.  New syntax 'x and ''T, for quoting Names.  It's rather like [| x |]
    and [t| T |] respectively, except that

	a) it's non-monadic:  'x :: Name
	b) you get a Name not an Exp or Type

3.  reify is an ordinary function
	reify :: Name -> Q Info
    New data type Info which tells what TH knows about Name

4.  Local variables work properly.  So this works now (crashed before):
	f x = $( [| x |] )

5.  THSyntax is split up into three modules:

  Language.Haskell.TH		TH "clients" import this

  Language.Haskell.TH.THSyntax	data type declarations and internal stuff

  Language.Haskell.TH.THLib	Support library code (all re-exported
				by TH), including smart constructors and
				pretty printer

6.  Error reporting and recovery are in (not yet well tested)

	report :: Bool {- True <=> fatal -} -> String -> Q ()
	recover :: Q a -> Q a -> Q a

7.  Can find current module

	currentModule :: Q String


Much other cleaning up, needless to say.

-------------------------
		GHC heart/lung transplant
		-------------------------

This major commit changes the way that GHC deals with importing
types and functions defined in other modules, during renaming and
typechecking.  On the way I've changed or cleaned up numerous other
things, including many that I probably fail to mention here.

Major benefit: GHC should suck in many fewer interface files when
compiling (esp with -O).  (You can see this with -ddump-rn-stats.)

It's also some 1500 lines of code shorter than before.

**	So expect bugs!  I can do a 3-stage bootstrap, and run
**	the test suite, but you may be doing stuff I havn't tested.
** 	Don't update if you are relying on a working HEAD.


In particular, (a) External Core and (b) GHCi are very little tested.

	But please, please DO test this version!


	------------------------
		Big things
	------------------------

Interface files, version control, and importing declarations
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* There is a totally new data type for stuff that lives in interface files:
	Original names			IfaceType.IfaceExtName
	Types				IfaceType.IfaceType
	Declarations (type,class,id)	IfaceSyn.IfaceDecl
	Unfoldings			IfaceSyn.IfaceExpr
  (Previously we used HsSyn for type/class decls, and UfExpr for unfoldings.)
  The new data types are in iface/IfaceType and iface/IfaceSyn.  They are
  all instances of Binary, so they can be written into interface files.
  Previous engronkulation concering the binary instance of RdrName has
  gone away -- RdrName is not an instance of Binary any more.  Nor does
  Binary.lhs need to know about the ``current module'' which it used to,
  which made it specialised to GHC.

  A good feature of this is that the type checker for source code doesn't
  need to worry about the possibility that we might be typechecking interface
  file stuff.  Nor does it need to do renaming; we can typecheck direct from
  IfaceSyn, saving a whole pass (module TcIface)

* Stuff from interface files is sucked in *lazily*, rather than being eagerly
  sucked in by the renamer. Instead, we use unsafeInterleaveIO to capture
  a thunk for the unfolding of an imported function (say).  If that unfolding
  is every pulled on, TcIface will scramble over the unfolding, which may
  in turn pull in the interface files of things mentioned in the unfolding.

  The External Package State is held in a mutable variable so that it
  can be side-effected by this lazy-sucking-in process (which may happen
  way later, e.g. when the simplifier runs).   In effect, the EPS is a kind
  of lazy memo table, filled in as we suck things in.  Or you could think
  of it as a global symbol table, populated on demand.

* This lazy sucking is very cool, but it can lead to truly awful bugs. The
  intent is that updates to the symbol table happen atomically, but very bad
  things happen if you read the variable for the table, and then force a
  thunk which updates the table.  Updates can get lost that way. I regret
  this subtlety.

  One example of the way it showed up is that the top level of TidyPgm
  (which updates the global name cache) to be much more disciplined about
  those updates, since TidyPgm may itself force thunks which allocate new
  names.

* Version numbering in interface files has changed completely, fixing
  one major bug with ghc --make.  Previously, the version of A.f changed
  only if A.f's type and unfolding was textually different.  That missed
  changes to things that A.f's unfolding mentions; which was fixed by
  eagerly sucking in all of those things, and listing them in the module's
  usage list.  But that didn't work with --make, because they might have
  been already sucked in.

  Now, A.f's version changes if anything reachable from A.f (via interface
  files) changes.  A module with unchanged source code needs recompiling
  only if the versions of any of its free variables changes. [This isn't
  quite right for dictionary functions and rules, which aren't mentioned
  explicitly in the source.  There are extensive comments in module MkIface,
  where all version-handling stuff is done.]

* We don't need equality on HsDecls any more (because they aren't used in
  interface files).  Instead we have a specialised equality for IfaceSyn
  (eqIfDecl etc), which uses IfaceEq instead of Bool as its result type.
  See notes in IfaceSyn.

* The horrid bit of the renamer that tried to predict what instance decls
  would be needed has gone entirely.  Instead, the type checker simply
  sucks in whatever instance decls it needs, when it needs them.  Easy!

  Similarly, no need for 'implicitModuleFVs' and 'implicitTemplateHaskellFVs'
  etc.  Hooray!


Types and type checking
~~~~~~~~~~~~~~~~~~~~~~~
* Kind-checking of types is far far tidier (new module TcHsTypes replaces
  the badly-named TcMonoType).  Strangely, this was one of my
  original goals, because the kind check for types is the Right Place to
  do type splicing, but it just didn't fit there before.

* There's a new representation for newtypes in TypeRep.lhs.  Previously
  they were represented using "SourceTypes" which was a funny compromise.
  Now they have their own constructor in the Type datatype.  SourceType
  has turned back into PredType, which is what it used to be.

* Instance decl overlap checking done lazily.  Consider
	instance C Int b
	instance C a Int
  These were rejected before as overlapping, because when seeking
  (C Int Int) one couldn't tell which to use.  But there's no problem when
  seeking (C Bool Int); it can only be the second.

  So instead of checking for overlap when adding a new instance declaration,
  we check for overlap when looking up an Inst.  If we find more than one
  matching instance, we see if any of the candidates dominates the others
  (in the sense of being a substitution instance of all the others);
  and only if not do we report an error.



	------------------------
	     Medium things
	------------------------

* The TcRn monad is generalised a bit further.  It's now based on utils/IOEnv.lhs,
  the IO monad with an environment.  The desugarer uses the monad too,
  so that anything it needs can get faulted in nicely.

* Reduce the number of wired-in things; in particular Word and Integer
  are no longer wired in.  The latter required HsLit.HsInteger to get a
  Type argument.  The 'derivable type classes' data types (:+:, :*: etc)
  are not wired in any more either (see stuff about derivable type classes
  below).

* The PersistentComilerState is now held in a mutable variable
  in the HscEnv.  Previously (a) it was passed to and then returned by
  many top-level functions, which was painful; (b) it was invariably
  accompanied by the HscEnv.  This change tidies up top-level plumbing
  without changing anything important.

* Derivable type classes are treated much more like 'deriving' clauses.
  Previously, the Ids for the to/from functions lived inside the TyCon,
  but now the TyCon simply records their existence (with a simple boolean).
  Anyone who wants to use them must look them up in the environment.

  This in turn makes it easy to generate the to/from functions (done
  in types/Generics) using HsSyn (like TcGenDeriv for ordinary derivings)
  instead of CoreSyn, which in turn means that (a) we don't have to figure
  out all the type arguments etc; and (b) it'll be type-checked for us.
  Generally, the task of generating the code has become easier, which is
  good for Manuel, who wants to make it more sophisticated.

* A Name now says what its "parent" is. For example, the parent of a data
  constructor is its type constructor; the parent of a class op is its
  class.  This relationship corresponds exactly to the Avail data type;
  there may be other places we can exploit it.  (I made the change so that
  version comparison in interface files would be a bit easier; but in
  fact it tided up other things here and there (see calls to
  Name.nameParent).  For example, the declaration pool, of declararations
  read from interface files, but not yet used, is now keyed only by the 'main'
  name of the declaration, not the subordinate names.

* New types OccEnv and OccSet, with the usual operations.
  OccNames can be efficiently compared, because they have uniques, thanks
  to the hashing implementation of FastStrings.

* The GlobalRdrEnv is now keyed by OccName rather than RdrName.  Not only
  does this halve the size of the env (because we don't need both qualified
  and unqualified versions in the env), but it's also more efficient because
  we can use a UniqFM instead of a FiniteMap.

  Consequential changes to Provenance, which has moved to RdrName.

* External Core remains a bit of a hack, as it was before, done with a mixture
  of HsDecls (so that recursiveness and argument variance is still inferred),
  and IfaceExprs (for value declarations).  It's not thoroughly tested.


	------------------------
	     Minor things
	------------------------

* DataCon fields dcWorkId, dcWrapId combined into a single field
  dcIds, that is explicit about whether the data con is a newtype or not.
  MkId.mkDataConWorkId and mkDataConWrapId are similarly combined into
  MkId.mkDataConIds

* Choosing the boxing strategy is done for *source* type decls only, and
  hence is now in TcTyDecls, not DataCon.

* WiredIn names are distinguished by their n_sort field, not by their location,
  which was rather strange

* Define Maybes.mapCatMaybes :: (a -> Maybe b) -> [a] -> [b]
  and use it here and there

* Much better pretty-printing of interface files (--show-iface)

Many, many other small things.


	------------------------
	     File changes
	------------------------
* New iface/ subdirectory
* Much of RnEnv has moved to iface/IfaceEnv
* MkIface and BinIface have moved from main/ to iface/
* types/Variance has been absorbed into typecheck/TcTyDecls
* RnHiFiles and RnIfaces have vanished entirely.  Their
  work is done by iface/LoadIface
* hsSyn/HsCore has gone, replaced by iface/IfaceSyn
* typecheck/TcIfaceSig has gone, replaced by iface/TcIface
* typecheck/TcMonoType has been renamed to typecheck/TcHsType
* basicTypes/Var.hi-boot and basicTypes/Generics.hi-boot have gone altogether

The concensus seems to be that 'with' should go away now, after its
customary period of deprecation.  Hugs has already removed it, so
we're following suit.

Legacy Removal
~~~~~~~~~~~~~~

The following features have been consigned to the bit bucket:

  _ccall_
  _casm_
  ``....''  (lit-lits)
  the CCallable class
  the CReturnable class

Support for interop'ing with .NET via FFI declarations along the
lines of what Hugs98.NET offers, see

 http://haskell.org/pipermail/cvs-hugs/2003-March/001723.html

for FFI decl details.

To enable, configure with --enable-dotnet + have a look
in ghc/rts/dotnet/Makefile for details of what tools are needed to
build the .NET interop layer (tools from VS.NET / Framework SDK.)

The commit doesn't include some library additions + wider-scale
testing is required before this extension can be regarded as available
for general use. 'foreign import dotnet' is currently only supported
by the C backend.

-------------------------------------
	Improve the "unused binding" warnings
	-------------------------------------

We've had a succession of hacks for reporting warnings for
unused bindings.  Consider

	module M( f ) where

 	f x = x

	g x = g x + h x
	h x = x

Here, g mentions itself and h, but is not itself mentioned. So
really both g and h are dead code.  We've been getting this wrong
for ages, and every hack so far has failed on some simple programs.

This commit does a much better job.  The renamer applied to a bunch
of bindings returns a NameSet.DefUses, which is a dependency-ordered
lists of def/use pairs.  It's documented in NameSet.
Given this, we can work out precisely what is not used, in a nice
tidy way.

It's less convenient in the case of type and class declarations, because
the strongly-connected-component analysis can span module boundaries.
So things are pretty much as they were for these.


As usual, there was a lot of chuffing around tidying things up.
I havn't tested it at all thoroughly yet.

Various unrelated import-decl-pruning has been done too.

-------------------------------------
      Add Core Notes and the {-# CORE #-} pragma
	-------------------------------------

This is an idea of Hal Daume's. The key point is that Notes in Core
are augmented thus:

  data Note
    = SCC CostCentre
    | ...
    | CoreNote String     -- NEW

These notes can be injected via a Haskell-source pragma:

   f x = ({-# CORE "foo" #-} show) ({-# CORE "bar" #-} x)

This wraps a (Note (CoreNote "foo")) around the 'show' variable,
and a similar note around the argument to 'show'.

These notes are basically ignored by GHC, but are emitted into
External Core, where they may convey useful information.

Exactly how code involving these notes is munged by the simplifier
isn't very well defined.  We'll see how it pans out.  Meanwhile
the impact on the rest of the compiler is minimal.

Dont bail out quite so fast

Oops... add missing free-vars

------------------------------------------------
	Allow implicit-parameter bindings anywhere that
		a normal binding group is allowed.
	------------------------------------------------

That is, you can have implicit parameters

	* in a let binding
	* in a where clause (but then you can't have non-implicit
	  ones as well)
	* in a let group in a list comprehension or monad do-notation

The implementation is simple: just add IPBinds to the allowable forms of HsBinds,
and remove the HsWith expression form altogether.   (It now comes in via the
HsLet form.)

It'a a nice generalisation really.  Needs a bit of documentation, which I'll do next.