nix-local-build.rst 66.5 KB
Newer Older
Leonid Onokhov's avatar
Leonid Onokhov committed
1
.. highlight:: console
2 3 4 5 6 7 8 9 10 11

Quickstart
==========

Suppose that you are in a directory containing a single Cabal package
which you wish to build. You can configure and build it using Nix-style
local builds with this command (configuring is not necessary):

::

Leonid Onokhov's avatar
Leonid Onokhov committed
12
    $ cabal new-build
13 14 15 16 17

To open a GHCi shell with this package, use this command:

::

Leonid Onokhov's avatar
Leonid Onokhov committed
18
    $ cabal new-repl
19

Francesco Gazzetta's avatar
Francesco Gazzetta committed
20 21 22 23 24 25
To run an executable defined in this package, use this command:

::

    $ cabal new-run <executable name> [executable args]

26 27 28 29 30 31 32 33 34 35 36
Developing multiple packages
----------------------------

Many Cabal projects involve multiple packages which need to be built
together. To build multiple Cabal packages, you need to first create a
``cabal.project`` file which declares where all the local package
directories live. For example, in the Cabal repository, there is a root
directory with a folder per package, e.g., the folders ``Cabal`` and
``cabal-install``. The ``cabal.project`` file specifies each folder as
part of the project:

Leonid Onokhov's avatar
Leonid Onokhov committed
37
.. code-block:: cabal
38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

    packages: Cabal/
              cabal-install/

The expectation is that a ``cabal.project`` is checked into your source
control, to be used by all developers of a project. If you need to make
local changes, they can be placed in ``cabal.project.local`` (which
should not be checked in.)

Then, to build every component of every package, from the top-level
directory, run the command: (Warning: cabal-install-1.24 does NOT have
this behavior; you will need to upgrade to HEAD.)

::

Leonid Onokhov's avatar
Leonid Onokhov committed
53
    $ cabal new-build
54 55 56 57 58 59

To build a specific package, you can either run ``new-build`` from the
directory of the package in question:

::

Leonid Onokhov's avatar
Leonid Onokhov committed
60 61
    $ cd cabal-install
    $ cabal new-build
62 63 64 65 66 67

or you can pass the name of the package as an argument to
``cabal new-build`` (this works in any subdirectory of the project):

::

Leonid Onokhov's avatar
Leonid Onokhov committed
68
    $ cabal new-build cabal-install
69 70 71 72 73 74

You can also specify a specific component of the package to build. For
example, to build a test suite named ``package-tests``, use the command:

::

Leonid Onokhov's avatar
Leonid Onokhov committed
75
    $ cabal new-build package-tests
76 77 78 79 80 81 82 83 84

Targets can be qualified with package names. So to request
``package-tests`` *from* the ``Cabal`` package, use
``Cabal:package-tests``.

Unlike sandboxes, there is no need to setup a sandbox or ``add-source``
projects; just check in ``cabal.project`` to your repository and
``new-build`` will just work.

85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110
Cookbook
========

How can I profile my library/application?
-----------------------------------------

First, make sure you have HEAD; 1.24 is affected by :issue:`3790`,
which means that if any project which transitively depends on a
package which has a Custom setup built against Cabal 1.22 or earlier
will silently not work.

Create or edit your ``cabal.project.local``, adding the following
line::

    profiling: True

Now, ``cabal new-build`` will automatically build all libraries and
executables with profiling.  You can fine-tune the profiling settings
for each package using :cfg-field:`profiling-detail`::

    package p
        profiling-detail: toplevel-functions

Alternately, you can call ``cabal new-build --enable-profiling`` to
temporarily build with profiling.

111 112 113 114 115 116 117 118 119
How it works
============

Local versus external packages
------------------------------

One of the primary innovations of Nix-style local builds is the
distinction between local packages, which users edit and recompile and
must be built per-project, versus external packages, which can be cached
120
across projects. To be more precise:
121 122 123 124 125

1. A **local package** is one that is listed explicitly in the
   ``packages``, ``optional-packages`` or ``extra-packages`` field of a
   project. Usually, these refer to packages whose source code lives
   directly in a folder in your project (although, you can list an
126
   arbitrary Hackage package in ``extra-packages`` to force it to be
127 128 129 130 131 132 133 134
   treated as local).

Local packages, as well as the external packages (below) which depend on
them, are built **inplace**, meaning that they are always built
specifically for the project and are not installed globally. Inplace
packages are not cached and not given unique hashes, which makes them
suitable for packages which you want to edit and recompile.

135
2. An **external package** is any package which is not listed in the
136 137 138 139 140 141 142 143 144 145 146 147
   ``packages`` field. The source code for external packages is usually
   retrieved from Hackage.

When an external package does not depend on an inplace package, it can
be built and installed to a **global** store, which can be shared across
projects. These build products are identified by a hash that over all of
the inputs which would influence the compilation of a package (flags,
dependency selection, etc.). Just as in Nix, these hashes uniquely
identify the result of a build; if we compute this identifier and we
find that we already have this ID built, we can just use the already
built version.

Alex Biehl's avatar
Alex Biehl committed
148 149 150 151 152
The global package store is ``~/.cabal/store`` (configurable via 
global `store-dir` option); if you need to clear your store for 
whatever reason (e.g., to reclaim disk space or because the global
store is corrupted), deleting this directory is safe (``new-build``
will just rebuild everything it needs on its next invocation).
153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175

This split motivates some of the UI choices for Nix-style local build
commands. For example, flags passed to ``cabal new-build`` are only
applied to *local* packages, so that adding a flag to
``cabal new-build`` doesn't necessitate a rebuild of *every* transitive
dependency in the global package store.

In cabal-install HEAD, Nix-style local builds also take advantage of a
new Cabal library feature, `per-component
builds <https://github.com/ezyang/ghc-proposals/blob/master/proposals/0000-componentized-cabal.rst>`__,
where each component of a package is configured and built separately.
This can massively speed up rebuilds of packages with lots of components
(e.g., a package that defines multiple executables), as only one
executable needs to be rebuilt. Packages that use Custom setup scripts
are not currently built on a per-component basis.

Where are my build products?
----------------------------

A major deficiency in the current implementation of new-build is that
there is no programmatic way to access the location of build products.
The location of the build products is intended to be an internal
implementation detail of new-build, but we also understand that many
176
unimplemented features (e.g., ``new-install``) can only be reasonably
177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293
worked around by accessing build products directly.

The location where build products can be found varies depending on the
version of cabal-install:

-  In cabal-install-1.24, the dist directory for a package ``p-0.1`` is
   stored in ``dist-newstyle/build/p-0.1``. For example, if you built an
   executable or test suite named ``pexe``, it would be located at
   ``dist-newstyle/build/p-0.1/build/pexe/pexe``.

-  In cabal-install HEAD, the dist directory for a package ``p-0.1``
   defining a library built with GHC 8.0.1 on 64-bit Linux is
   ``dist-newstyle/build/x86_64-linux/ghc-8.0.1/p-0.1``. When
   per-component builds are enabled (any non-Custom package), a
   subcomponent like an executable or test suite named ``pexe`` will be
   stored at
   ``dist-newstyle/build/x86_64-linux/ghc-8.0.1/p-0.1/c/pexe``; thus,
   the full path of the executable is
   ``dist-newstyle/build/x86_64-linux/ghc-8.0.1/p-0.1/c/pexe/build/pexe/pexe``
   (you can see why we want this to be an implementation detail!)

The paths are a bit longer in HEAD but the benefit is that you can
transparently have multiple builds with different versions of GHC. We
plan to add the ability to create aliases for certain build
configurations, and more convenient paths to access particularly useful
build products like executables.

Caching
-------

Nix-style local builds sport a robust caching system which help reduce
the time it takes to execute a rebuild cycle. While the details of how
``cabal-install`` does caching are an implementation detail and may
change in the future, knowing what gets cached is helpful for
understanding the performance characteristics of invocations to
``new-build``. The cached intermediate results are stored in
``dist-newstyle/cache``; this folder can be safely deleted to clear the
cache.

The following intermediate results are cached in the following files in
this folder (the most important two are first):

``solver-plan`` (binary)
    The result of calling the dependency solver, assuming that the
    Hackage index, local ``cabal.project`` file, and local ``cabal``
    files are unmodified. (Notably, we do NOT have to dependency solve
    again if new build products are stored in the global store; the
    invocation of the dependency solver is independent of what is
    already available in the store.)
``source-hashes`` (binary)
    The hashes of all local source files. When all local source files of
    a local package are unchanged, ``cabal new-build`` will skip
    invoking ``setup build`` entirely (saving us from a possibly
    expensive call to ``ghc --make``). The full list of source files
    participating in compilation are determined using
    ``setup sdist --list-sources`` (thus, if you do not list all your
    source files in a Cabal file, you may fail to recompile when you
    edit them.)
``config`` (same format as ``cabal.project``)
    The full project configuration, merged from ``cabal.project`` (and
    friends) as well as the command line arguments.
``compiler`` (binary)
    The configuration of the compiler being used to build the project.
``improved-plan`` (binary)
    Like ``solver-plan``, but with all non-inplace packages improved
    into pre-existing copies from the store.

Note that every package also has a local cache managed by the Cabal
build system, e.g., in ``$distdir/cache``.

There is another useful file in ``dist-newstyle/cache``, ``plan.json``,
which is a JSON serialization of the computed install plan. (TODO: docs)

Commands
========

We now give an in-depth description of all the commands, describing the
arguments and flags they accept.

cabal new-configure
-------------------

``cabal new-configure`` takes a set of arguments and writes a
``cabal.project.local`` file based on the flags passed to this command.
``cabal new-configure FLAGS; cabal new-build`` is roughly equivalent to
``cabal new-build FLAGS``, except that with ``new-configure`` the flags
are persisted to all subsequent calls to ``new-build``.

``cabal new-configure`` is intended to be a convenient way to write out
a ``cabal.project.local`` for simple configurations; e.g.,
``cabal new-configure -w ghc-7.8`` would ensure that all subsequent
builds with ``cabal new-build`` are performed with the compiler
``ghc-7.8``. For more complex configuration, we recommend writing the
``cabal.project.local`` file directly (or placing it in
``cabal.project``!)

``cabal new-configure`` inherits options from ``Cabal``. semantics:

-  Any flag accepted by ``./Setup configure``.

-  Any flag accepted by ``cabal configure`` beyond
   ``./Setup configure``, namely ``--cabal-lib-version``,
   ``--constraint``, ``--preference`` and ``--solver.``

-  Any flag accepted by ``cabal install`` beyond ``./Setup configure``.

-  Any flag accepted by ``./Setup haddock``.

The options of all of these flags apply only to *local* packages in a
project; this behavior is different than that of ``cabal install``,
which applies flags to every package that would be built. The motivation
for this is to avoid an innocuous addition to the flags of a package
resulting in a rebuild of every package in the store (which might need
to happen if a flag actually applied to every transitive dependency). To
apply options to an external package, use a ``package`` stanza in a
``cabal.project`` file.

Moritz Angermann's avatar
Moritz Angermann committed
294 295 296 297 298 299 300 301 302 303 304 305 306 307
cabal new-update
----------------

``cabal new-update`` updates the state of the package index. If the
project contains multiple remote package repositories it will update
the index of all of them (e.g. when using overlays).

Seom examples:

::

    $ cabal new-update                  # update all remote repos
    $ cabal new-update head.hackage     # update only head.hackage

308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325
cabal new-build
---------------

``cabal new-build`` takes a set of targets and builds them. It
automatically handles building and installing any dependencies of these
targets.

A target can take any of the following forms:

-  A package target: ``package``, which specifies that all enabled
   components of a package to be built. By default, test suites and
   benchmarks are *not* enabled, unless they are explicitly requested
   (e.g., via ``--enable-tests``.)

-  A component target: ``[package:][ctype:]component``, which specifies
   a specific component (e.g., a library, executable, test suite or
   benchmark) to be built.

Duncan Coutts's avatar
Duncan Coutts committed
326 327
-  All packages: ``all``, which specifies all packages within the project.

328 329 330 331 332 333 334 335
-  Components of a particular type: ``package:ctypes``, ``all:ctypes``:
   which specifies all components of the given type. Where valid
   ``ctypes`` are:
     - ``libs``, ``libraries``,
     - ``flibs``, ``foreign-libraries``,
     - ``exes``, ``executables``,
     - ``tests``,
     - ``benches``, ``benchmarks``.
Duncan Coutts's avatar
Duncan Coutts committed
336

337
In component targets, ``package:`` and ``ctype:`` (valid component types
338
are ``lib``, ``flib``, ``exe``, ``test`` and ``bench``) can be used to
339 340 341 342 343 344 345 346 347
disambiguate when multiple packages define the same component, or the
same component name is used in a package (e.g., a package ``foo``
defines both an executable and library named ``foo``). We always prefer
interpreting a target as a package name rather than as a component name.

Some example targets:

::

Leonid Onokhov's avatar
Leonid Onokhov committed
348 349
    $ cabal new-build lib:foo-pkg       # build the library named foo-pkg
    $ cabal new-build foo-pkg:foo-tests # build foo-tests in foo-pkg
350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371

(There is also syntax for specifying module and file targets, but it
doesn't currently do anything.)

Beyond a list of targets, ``cabal new-build`` accepts all the flags that
``cabal new-configure`` takes. Most of these flags are only taken into
consideration when building local packages; however, some flags may
cause extra store packages to be built (for example,
``--enable-profiling`` will automatically make sure profiling libraries
for all transitive dependencies are built and installed.)

cabal new-repl
--------------

``cabal new-repl TARGET`` loads all of the modules of the target into
GHCi as interpreted bytecode. It takes the same flags as
``cabal new-build``.

Currently, it is not supported to pass multiple targets to ``new-repl``
(``new-repl`` will just successively open a separate GHCi session for
each target.)

Francesco Gazzetta's avatar
Francesco Gazzetta committed
372 373 374 375 376 377
cabal new-run
-------------

``cabal new-run [TARGET [ARGS]]`` runs the executable specified by the
target, which can be a component, a package or can be left blank, as
long as it can uniquely identify an executable within the project.
378
Tests and benchmarks are also treated as executables.
Francesco Gazzetta's avatar
Francesco Gazzetta committed
379

380
See `the new-build section <#cabal-new-build>`__ for the target syntax.
Francesco Gazzetta's avatar
Francesco Gazzetta committed
381 382 383 384 385 386 387 388 389 390 391 392

Except in the case of the empty target, the strings after it will be
passed to the executable as arguments.

If one of the arguments starts with ``-`` it will be interpreted as
a cabal flag, so if you need to pass flags to the executable you
have to separate them with ``--``.

::

    $ cabal new-run target -- -a -bcd --argument

393 394 395
cabal new-freeze
----------------

396 397 398 399 400 401 402 403 404
``cabal new-freeze`` writes out a **freeze file** which records all of
the versions and flags which that are picked by the solver under the
current index and flags.  Default name of this file is
``cabal.project.freeze`` but in combination with a
``--project-file=my.project`` flag (see :ref:`project-file
<cmdoption-project-file>`)
the name will be ``my.project.freeze``.
A freeze file has the same syntax as ``cabal.project`` and looks
something like this:
405

Leonid Onokhov's avatar
Leonid Onokhov committed
406
.. highlight:: cabal
407

Leonid Onokhov's avatar
Leonid Onokhov committed
408
::
Leonid Onokhov's avatar
Leonid Onokhov committed
409

410 411 412 413
    constraints: HTTP ==4000.3.3,
                 HTTP +warp-tests -warn-as-error -network23 +network-uri -mtl1 -conduit10,
                 QuickCheck ==2.9.1,
                 QuickCheck +templatehaskell,
414 415
                 -- etc...

416 417 418 419 420 421 422

For end-user executables, it is recommended that you distribute the
``cabal.project.freeze`` file in your source repository so that all
users see a consistent set of dependencies. For libraries, this is not
recommended: users often need to build against different versions of
libraries than what you developed against.

423 424 425 426 427 428 429
cabal new-bench
---------------

``cabal new-bench [TARGETS] [OPTIONS]`` runs the specified benchmarks
(all the benchmarks in the current package by default), first ensuring
they are up to date.

430 431 432 433 434 435 436 437 438 439 440 441 442
cabal new-test
--------------

``cabal new-test [TARGETS] [OPTIONS]`` runs the specified test suites
(all the test suites in the current package by default), first ensuring
they are up to date.

cabal new-haddock
-----------------

``cabal new-haddock [FLAGS] TARGET`` builds Haddock documentation for
the specified packages within the project.

Francesco Gazzetta's avatar
Francesco Gazzetta committed
443 444
cabal new-exec
---------------
445

Francesco Gazzetta's avatar
Francesco Gazzetta committed
446 447 448
``cabal new-exec [FLAGS] [--] COMMAND [--] [ARGS]`` runs the specified command
using the project's environment. That is, passing the right flags to compiler
invocations and bringing the project's executables into scope.
449 450 451

Unsupported commands
--------------------
452

Francesco Gazzetta's avatar
Francesco Gazzetta committed
453
The following commands are not currently supported:
454

455
``cabal new-install`` (:issue:`3737` and :issue:`3332`)
456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476
    Workaround: no good workaround at the moment. (But note that you no
    longer need to install libraries before building!)

Configuring builds with cabal.project
=====================================

``cabal.project`` files support a variety of options which configure the
details of your build. The general syntax of a ``cabal.project`` file is
similar to that of a Cabal file: there are a number of fields, some of
which live inside stanzas:

::

    packages: */*.cabal
    with-compiler: /opt/ghc/8.0.1/bin/ghc

    package cryptohash
      optimization: False

In general, the accepted field names coincide with the accepted command
line flags that ``cabal install`` and other commands take. For example,
477 478
``cabal new-configure --enable-profiling`` will write out a project
file with ``profiling: True``.
479 480 481 482 483 484 485 486 487 488 489 490

The full configuration of a project is determined by combining the
following sources (later entries override earlier ones):

1. ``~/.cabal/config`` (the user-wide global configuration)

2. ``cabal.project`` (the project configuratoin)

3. ``cabal.project.freeze`` (the output of ``cabal new-freeze``)

4. ``cabal.project.local`` (the output of ``cabal new-configure``)

491

492 493 494 495 496 497
Specifying the local packages
-----------------------------

The following top-level options specify what the local packages of a
project are:

498
.. cfg-field:: packages: package location list (space or comma separated)
Leonid Onokhov's avatar
Leonid Onokhov committed
499
    :synopsis: Project packages.
500 501

    :default: ``./*.cabal``
502

503 504 505 506 507
    Specifies the list of package locations which contain the local
    packages to be built by this project. Package locations can take the
    following forms:

    1. They can specify a Cabal file, or a directory containing a Cabal
508
       file, e.g., ``packages: Cabal cabal-install/cabal-install.cabal``.
509 510 511 512 513 514 515 516 517 518 519 520 521 522

    2. They can specify a glob-style wildcards, which must match one or
       more (a) directories containing a (single) Cabal file, (b) Cabal
       files (extension ``.cabal``), or (c) [STRIKEOUT:tarballs which
       contain Cabal packages (extension ``.tar.gz``)] (not implemented
       yet). For example, to match all Cabal files in all
       subdirectories, as well as the Cabal projects in the parent
       directories ``foo`` and ``bar``, use
       ``packages: */*.cabal ../{foo,bar}/``

    3. [STRIKEOUT:They can specify an ``http``, ``https`` or ``file``
       URL, representing the path to a remote tarball to be downloaded
       and built.] (not implemented yet)

523
    There is no command line variant of this field; see :issue:`3585`.
524

525
.. cfg-field:: optional-packages: package location list (space or comma-separated)
Leonid Onokhov's avatar
Leonid Onokhov committed
526
    :synopsis: Optional project packages.
527 528 529

    :default: ``./*/*.cabal``

Leonid Onokhov's avatar
Leonid Onokhov committed
530 531 532 533 534 535
    Like :cfg-field:`packages`, specifies a list of package locations
    containing local packages to be built. Unlike :cfg-field:`packages`,
    if we glob for a package, it is permissible for the glob to match against
    zero packages. The intended use-case for :cfg-field:`optional-packages`
    is to make it so that vendored packages can be automatically picked up if
    they are placed in a subdirectory, but not error if there aren't any.
536 537 538

    There is no command line variant of this field.

539
.. cfg-field:: extra-packages: package list with version bounds (comma separated)
Leonid Onokhov's avatar
Leonid Onokhov committed
540
    :synopsis: Adds external pacakges as local
541

542 543 544 545 546 547 548 549 550
    [STRIKEOUT:Specifies a list of external packages from Hackage which
    should be considered local packages.] (Not implemented)

    There is no command line variant of this field.

[STRIKEOUT:There is also a stanza ``source-repository-package`` for
specifying packages from an external version control.] (Not
implemented.)

551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566
All local packages are *vendored*, in the sense that if other packages
(including external ones from Hackage) depend on a package with the name
of a local package, the local package is preferentially used.  This
motivates the default settings::

    packages: ./*.cabal
    optional-packages: ./*/*.cabal

...any package can be vendored simply by making a checkout in the
top-level project directory, as might be seen in this hypothetical
directory layout::

    foo.cabal
    foo-helper/     # local package
    unix/           # vendored external package

567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582
All of these options support globs. ``cabal new-build`` has its own glob
format:

-  Anywhere in a path, as many times as you like, you can specify an
   asterisk ``*`` wildcard. E.g., ``*/*.cabal`` matches all ``.cabal``
   files in all immediate subdirectories. Like in glob(7), asterisks do
   not match hidden files unless there is an explicit period, e.g.,
   ``.*/foo.cabal`` will match ``.private/foo.cabal`` (but
   ``*/foo.cabal`` will not).

-  You can use braces to specify specific directories; e.g.,
   ``{vendor,pkgs}/*.cabal`` matches all Cabal files in the ``vendor``
   and ``pkgs`` subdirectories.

Formally, the format described by the following BNF:

583
.. code-block:: abnf
584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605

    FilePathGlob    ::= FilePathRoot FilePathGlobRel
    FilePathRoot    ::= {- empty -}        # relative to cabal.project
                      | "/"                # Unix root
                      | [a-zA-Z] ":" [/\\] # Windows root
                      | "~"                # home directory
    FilePathGlobRel ::= Glob "/"  FilePathGlobRel # Unix directory
                      | Glob "\\" FilePathGlobRel # Windows directory
                      | Glob         # file
                      | {- empty -}  # trailing slash
    Glob      ::= GlobPiece *
    GlobPiece ::= "*"            # wildcard
                | [^*{},/\\] *   # literal string
                | "\\" [*{},]    # escaped reserved character
                | "{" Glob "," ... "," Glob "}" # union (match any of these)

Global configuration options
----------------------------

The following top-level configuration options are not specific to any
package, and thus apply globally:

606 607
.. cfg-field:: verbose: nat
               --verbose=n, -vn
Leonid Onokhov's avatar
Leonid Onokhov committed
608
    :synopsis: Build verbosity level.
609 610 611

    :default: 1

612 613 614 615 616 617
    Control the verbosity of ``cabal`` commands, valid values are from 0
    to 3.

    The command line variant of this field is ``--verbose=2``; a short
    form ``-v2`` is also supported.

618 619
.. cfg-field:: jobs: nat or $ncpus
               --jobs=n, -jn, --jobs=$ncpus
Leonid Onokhov's avatar
Leonid Onokhov committed
620
    :synopsis: Number of builds running in parallel.
621 622 623

    :default: 1

624 625 626 627 628 629 630 631 632
    Run *nat* jobs simultaneously when building. If ``$ncpus`` is
    specified, run the number of jobs equal to the number of CPUs.
    Package building is often quite parallel, so turning on parallelism
    can speed up build times quite a bit!

    The command line variant of this field is ``--jobs=2``; a short form
    ``-j2`` is also supported; a bare ``--jobs`` or ``-j`` is equivalent
    to ``--jobs=$ncpus``.

633 634
.. cfg-field::  keep-going: boolean
                --keep-going
Leonid Onokhov's avatar
Leonid Onokhov committed
635
    :synopsis: Try to continue building on failure.
636 637 638

    :default: False

639 640 641 642 643
    If true, after a build failure, continue to build other unaffected
    packages.

    The command line variant of this field is ``--keep-going``.

644 645 646 647 648 649 650 651 652 653
.. option:: --builddir=DIR

    Specifies the name of the directory where build products for
    build will be stored; defaults to ``dist-newstyle``.  If a
    relative name is specified, this directory is resolved relative
    to the root of the project (i.e., where the ``cabal.project``
    file lives.)

    This option cannot be specified via a ``cabal.project`` file.

654
.. _cmdoption-project-file:
655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670
.. option:: --project-file=FILE

    Specifies the name of the project file used to specify the
    rest of the top-level configuration; defaults to ``cabal.project``.
    This name not only specifies the name of the main project file,
    but also the auxiliary project files ``cabal.project.freeze``
    and ``cabal.project.local``; for example, if you specify
    ``--project-file=my.project``, then the other files that will
    be probed are ``my.project.freeze`` and ``my.project.local``.

    If the specified project file is a relative path, we will
    look for the file relative to the current working directory,
    and then for the parent directory, until the project file is
    found or we have hit the top of the user's home directory.

    This option cannot be specified via a ``cabal.project`` file.
671

Alex Biehl's avatar
Alex Biehl committed
672 673 674 675
.. option:: --store-dir=DIR

    Specifies the name of the directory of the global package store.
    
676 677 678 679 680
Solver configuration options
----------------------------

The following settings control the behavior of the dependency solver:

681
.. cfg-field:: constraints: constraints list (comma separated)
682
               --constraint="pkg >= 2.0"
Leonid Onokhov's avatar
Leonid Onokhov committed
683
    :synopsis: Extra dependencies constraints.
684

685 686 687 688
    Add extra constraints to the version bounds, flag settings,
    and other properties a solver can pick for a
    package. For example:
               
689 690 691 692 693 694 695 696 697 698
    ::

        constraints: bar == 2.1

    A package can be specified multiple times in ``constraints``, in
    which case the specified constraints are intersected. This is
    useful, since the syntax does not allow you to specify multiple
    constraints at once. For example, to specify both version bounds and
    flag assignments, you would write:

699 700 701
    ::

        constraints: bar == 2.1,
702
                     bar +foo -baz
703

704 705 706
    Valid constraints take the same form as for the `constraint
    command line option
    <installing-packages.html#cmdoption-setup-configure--constraint>`__.
707

708 709
.. cfg-field:: preferences: preference (comma separated)
               --preference="pkg >= 2.0"
Leonid Onokhov's avatar
Leonid Onokhov committed
710
    :synopsis: Prefered dependency versions.
711 712 713

    Like :cfg-field:`constraints`, but the solver will attempt to satisfy
    these preferences on a best-effort basis. The resulting install is locally
714 715 716 717 718 719 720 721
    optimal with respect to preferences; specifically, no single package
    could be replaced with a more preferred version that still satisfies
    the hard constraints.

    Operationally, preferences can cause the solver to attempt certain
    version choices of a package before others, which can improve
    dependency solver runtime.

722
    One way to use :cfg-field:`preferences` is to take a known working set of
723 724 725 726 727 728 729 730 731 732
    constraints (e.g., via ``cabal new-freeze``) and record them as
    preferences. In this case, the solver will first attempt to use this
    configuration, and if this violates hard constraints, it will try to
    find the minimal number of upgrades to satisfy the hard constraints
    again.

    The command line variant of this field is
    ``--preference="pkg >= 2.0"``; to specify multiple preferences, pass
    the flag multiple times.

733
.. cfg-field:: allow-newer: none, all or list of scoped package names (space or comma separated)
734
               --allow-newer, --allow-newer=[none,all,[scope:][^]pkg]
Leonid Onokhov's avatar
Leonid Onokhov committed
735
    :synopsis: Lift dependencies upper bound constaints.
736 737 738

    :default: ``none``

739
    Allow the solver to pick an newer version of some packages than
740 741
    would normally be permitted by than the :pkg-field:`build-depends` bounds
    of packages in the install plan. This option may be useful if the
742 743
    dependency solver cannot otherwise find a valid install plan.

744
    For example, to relax ``pkg``\ s :pkg-field:`build-depends` upper bound on
745 746 747 748 749 750
    ``dep-pkg``, write a scoped package name of the form:

    ::

        allow-newer: pkg:dep-pkg

751 752 753 754 755 756 757 758 759 760 761
    If the scope shall be limited to specific releases of ``pkg``, the
    extended form as in

    ::

        allow-newer: pkg-1.2.3:dep-pkg, pkg-1.1.2:dep-pkg

    can be used to limit the relaxation of dependencies on
    ``dep-pkg`` by the ``pkg-1.2.3`` and ``pkg-1.1.2`` releases only.

    The scoped syntax is recommended, as it is often only a single package
762 763 764 765
    whose upper bound is misbehaving. In this case, the upper bounds of
    other packages should still be respected; indeed, relaxing the bound
    can break some packages which test the selected version of packages.

766 767 768 769 770 771 772
    The syntax also allows to prefix the dependee package with a
    modifier symbol to modify the scope/semantic of the relaxation
    transformation in a additional ways. Currently only one modifier
    symbol is defined, i.e. ``^`` (i.e. caret) which causes the
    relaxation to be applied only to ``^>=`` operators and leave all other
    version operators untouched.

773 774 775 776 777 778 779 780
    However, in some situations (e.g., when attempting to build packages
    on a new version of GHC), it is useful to disregard *all*
    upper-bounds, with respect to a package or all packages. This can be
    done by specifying just a package name, or using the keyword ``all``
    to specify all packages:

    ::

Leonid Onokhov's avatar
Leonid Onokhov committed
781
        -- Disregard upper bounds involving the dependencies on
782 783 784
        -- packages bar, baz. For quux only, relax
        -- 'quux ^>= ...'-style constraints only.
        allow-newer: bar, baz, ^quux
785

Leonid Onokhov's avatar
Leonid Onokhov committed
786
        -- Disregard all upper bounds when dependency solving
787 788
        allow-newer: all

789 790 791
        -- Disregard all `^>=`-style upper bounds when dependency solving
        allow-newer: ^all

792 793

    For consistency, there is also the explicit wildcard scope syntax
794 795
    ``*`` (or its alphabetic synonym ``all``). Consequently, the
    examples above are equivalent to the explicitly scoped variants:
796 797 798 799 800

    ::

        allow-newer: all:bar, *:baz, *:^quux

801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818
        allow-newer: *:*
        allow-newer: all:all

        allow-newer: *:^*
        allow-newer: all:^all

    In order to ignore all bounds specified by a package ``pkg-1.2.3``
    you can combine scoping with a right-hand-side wildcard like so

    ::

        -- Disregard any upper bounds specified by pkg-1.2.3
        allow-newer: pkg-1.2.3:*

        -- Disregard only `^>=`-style upper bounds in pkg-1.2.3
        allow-newer: pkg-1.2.3:^*


819 820 821
    :cfg-field:`allow-newer` is often used in conjunction with a constraint
    (in the cfg-field:`constraints` field) forcing the usage of a specific,
    newer version of a package.
822

823
    The command line variant of this field is e.g. ``--allow-newer=bar``. A
824 825
    bare ``--allow-newer`` is equivalent to ``--allow-newer=all``.

826
.. cfg-field:: allow-older: none, all, list of scoped package names (space or comma separated)
827
               --allow-older, --allow-older=[none,all,[scope:][^]pkg]
Leonid Onokhov's avatar
Leonid Onokhov committed
828
    :synopsis: Lift dependency lower bound constaints.
829
    :since: 2.0
830 831 832 833 834

    :default: ``none``

    Like :cfg-field:`allow-newer`, but applied to lower bounds rather than
    upper bounds.
835 836 837 838

    The command line variant of this field is ``--allow-older=all``. A
    bare ``--allow-older`` is equivalent to ``--allow-older=all``.

839 840 841

.. cfg-field:: index-state: HEAD, unix-timestamp, ISO8601 UTC timestamp.
   :synopsis: Use source package index state as it existed at a previous time.
842
   :since: 2.0
843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861

   :default: ``HEAD``

   This allows to change the source package index state the solver uses
   to compute install-plans. This is particularly useful in
   combination with freeze-files in order to also freeze the state the
   package index was in at the time the install-plan was frozen.

   ::

      -- UNIX timestamp format example
      index-state: @1474739268

      -- ISO8601 UTC timestamp format example
      -- This format is used by 'cabal new-configure'
      -- for storing `--index-state` values.
      index-state: 2016-09-24T17:47:48Z


862 863 864
Package configuration options
-----------------------------

865
Package options affect the building of specific packages. There are three
866 867 868 869 870 871 872 873 874
ways a package option can be specified:

-  They can be specified at the top-level, in which case they apply only
   to **local package**, or

-  They can be specified inside a ``package`` stanza, in which case they
   apply to the build of the package, whether or not it is local or
   external.

875 876 877 878 879
-  They can be specified inside an ``all-packages`` stanza, in which case they
   apply to all packages, local ones from the project and also external
   dependencies.


880 881 882
For example, the following options specify that :cfg-field:`optimization`
should be turned off for all local packages, and that ``bytestring`` (possibly
an external dependency) should be built with ``-fno-state-hack``::
883 884 885 886 887 888

    optimization: False

    package bytestring
        ghc-options: -fno-state-hack

889 890 891 892
``ghc-options`` is not specifically described in this documentation,
but is one of many fields for configuring programs.  They take the form
``progname-options`` and ``progname-location``, and
can only be set inside package stanzas.  (TODO: They are not supported
893
at top-level, see :issue:`3579`.)
894

895 896 897 898 899 900 901 902 903 904
At the moment, there is no way to specify an option to apply to all
external packages or all inplace packages. Additionally, it is only
possible to specify these options on the command line for all local
packages (there is no per-package command line interface.)

Some flags were added by more recent versions of the Cabal library. This
means that they are NOT supported by packages which use Custom setup
scripts that require a version of the Cabal library older than when the
feature was added.

905 906
.. cfg-field:: flags: list of +flagname or -flagname (space separated)
               --flags="+foo -bar", -ffoo, -f-bar
Leonid Onokhov's avatar
Leonid Onokhov committed
907
    :synopsis: Enable or disable package flags.
908

909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928
    Force all flags specified as ``+flagname`` to be true, and all flags
    specified as ``-flagname`` to be false. For example, to enable the
    flag ``foo`` and disable ``bar``, set:

    ::

        flags: +foo -bar

    If there is no leading punctuation, it is assumed that the flag
    should be enabled; e.g., this is equivalent:

    ::

        flags: foo -bar

    Flags are *per-package*, so it doesn't make much sense to specify
    flags at the top-level, unless you happen to know that *all* of your
    local packages support the same named flags. If a flag is not
    supported by a package, it is ignored.

929
    See also the solver configuration field :cfg-field:`constraints`.
930 931 932 933 934 935 936 937 938 939

    The command line variant of this flag is ``--flags``. There is also
    a shortened form ``-ffoo -f-bar``.

    A common mistake is to say ``cabal new-build -fhans``, where
    ``hans`` is a flag for a transitive dependency that is not in the
    local package; in this case, the flag will be silently ignored. If
    ``haskell-tor`` is the package you want this flag to apply to, try
    ``--constraint="haskell-tor +hans"`` instead.

940 941
.. cfg-field:: with-compiler: executable
               --with-compiler=executable
Leonid Onokhov's avatar
Leonid Onokhov committed
942
    :synopsis: Path to compiler executable.
943

944
    Specify the path to a particular compiler to be used. If not an
945
    absolute path, it will be resolved according to the :envvar:`PATH`
946
    environment. The type of the compiler (GHC, GHCJS, etc) must be
947
    consistent with the setting of the :cfg-field:`compiler` field.
948 949 950 951 952

    The most common use of this option is to specify a different version
    of your compiler to be used; e.g., if you have ``ghc-7.8`` in your
    path, you can specify ``with-compiler: ghc-7.8`` to use it.

953 954
    This flag also sets the default value of :cfg-field:`with-hc-pkg`, using
    the heuristic that it is named ``ghc-pkg-7.8`` (if your executable name
955 956
    is suffixed with a version number), or is the executable named
    ``ghc-pkg`` in the same directory as the ``ghc`` directory. If this
957
    heuristic does not work, set :cfg-field:`with-hc-pkg` explicitly.
958 959 960 961 962 963

    For inplace packages, ``cabal new-build`` maintains a separate build
    directory for each version of GHC, so you can maintain multiple
    build trees for different versions of GHC without clobbering each
    other.

964
    At the moment, it's not possible to set :cfg-field:`with-compiler` on a
965 966 967 968 969 970 971
    per-package basis, but eventually we plan on relaxing this
    restriction. If this is something you need, give us a shout.

    The command line variant of this flag is
    ``--with-compiler=ghc-7.8``; there is also a short version
    ``-w ghc-7.8``.

972 973
.. cfg-field:: with-hc-pkg: executable
               --with-hc-pkg=executable
Leonid Onokhov's avatar
Leonid Onokhov committed
974
    :synopsis: Specifies package tool.
975

976 977
    Specify the path to the package tool, e.g., ``ghc-pkg``. This
    package tool must be compatible with the compiler specified by
978 979 980
    :cfg-field:`with-compiler` (generally speaking, it should be precisely
    the tool that was distributed with the compiler). If this option is
    omitted, the default value is determined from :cfg-field:`with-compiler`.
981 982 983 984

    The command line variant of this flag is
    ``--with-hc-pkg=ghc-pkg-7.8``.

985 986 987
.. cfg-field:: optimization: nat
               --enable-optimization
               --disable-optimization
Leonid Onokhov's avatar
Leonid Onokhov committed
988
    :synopsis: Build with optimization.
989 990 991

    :default: ``1``

992 993 994 995 996 997 998 999 1000 1001 1002
    Build with optimization. This is appropriate for production use,
    taking more time to build faster libraries and programs.

    The optional *nat* value is the optimisation level. Some compilers
    support multiple optimisation levels. The range is 0 to 2. Level 0
    disables optimization, level 1 is the default. Level 2 is higher
    optimisation if the compiler supports it. Level 2 is likely to lead
    to longer compile times and bigger generated code. If you are not
    planning to run code, turning off optimization will lead to better
    build times and less code to be rebuilt when a module changes.

1003 1004
    When optimizations are enabled, Cabal passes ``-O2`` to the C compiler.

1005 1006 1007 1008
    We also accept ``True`` (equivalent to 1) and ``False`` (equivalent
    to 0).

    Note that as of GHC 8.0, GHC does not recompile when optimization
1009
    levels change (see :ghc-ticket:`10923`), so if
1010 1011 1012 1013 1014 1015 1016 1017
    you change the optimization level for a local package you may need
    to blow away your old build products in order to rebuild with the
    new optimization level.

    The command line variant of this flag is ``-O2`` (with ``-O1``
    equivalent to ``-O``). There are also long-form variants
    ``--enable-optimization`` and ``--disable-optimization``.

1018 1019
.. cfg-field:: configure-options: args (space separated)
               --configure-option=arg
Leonid Onokhov's avatar
Leonid Onokhov committed
1020
    :synopsis: Options to pass to configure script.
1021

1022 1023 1024 1025 1026 1027 1028 1029 1030
    A list of extra arguments to pass to the external ``./configure``
    script, if one is used. This is only useful for packages which have
    the ``Configure`` build type. See also the section on
    `system-dependent
    parameters <developing-packages.html#system-dependent-parameters>`__.

    The command line variant of this flag is ``--configure-option=arg``,
    which can be specified multiple times to pass multiple options.

1031 1032
.. cfg-field:: compiler: ghc, ghcjs, jhc, lhc, uhc or haskell-suite
               --compiler=compiler
Leonid Onokhov's avatar
Leonid Onokhov committed
1033
    :synopsis: Compiler to build with.
1034 1035 1036

    :default: ``ghc``

1037 1038 1039 1040 1041 1042
    Specify which compiler toolchain to be used. This is independent of
    ``with-compiler``, because the choice of toolchain affects Cabal's
    build logic.

    The command line variant of this flag is ``--compiler=ghc``.

1043 1044 1045
.. cfg-field:: tests: boolean
               --enable-tests
               --disable-tests
Leonid Onokhov's avatar
Leonid Onokhov committed
1046
    :synopsis: Build tests.
1047 1048 1049

    :default: ``False``

1050 1051 1052 1053 1054 1055 1056 1057
    Force test suites to be enabled. For most users this should not be
    needed, as we always attempt to solve for test suite dependencies,
    even when this value is ``False``; furthermore, test suites are
    automatically enabled if they are requested as a built target.

    The command line variant of this flag is ``--enable-tests`` and
    ``--disable-tests``.

1058 1059 1060
.. cfg-field:: benchmarks: boolean
               --enable-benchmarks
               --disable-benchmarks
Leonid Onokhov's avatar
Leonid Onokhov committed
1061
    :synopsis: Build benchmarks.
1062 1063 1064

    :default: ``False``

1065 1066 1067 1068 1069 1070 1071 1072
    Force benchmarks to be enabled. For most users this should not be
    needed, as we always attempt to solve for benchmark dependencies,
    even when this value is ``False``; furthermore, benchmarks are
    automatically enabled if they are requested as a built target.

    The command line variant of this flag is ``--enable-benchmarks`` and
    ``--disable-benchmarks``.

1073 1074
.. cfg-field:: extra-prog-path: paths (newline or comma separated)
               --extra-prog-path=PATH
Leonid Onokhov's avatar
Leonid Onokhov committed
1075
    :synopsis: Add directories to program search path.
1076 1077
    :since: 1.18

1078 1079 1080 1081 1082 1083 1084 1085 1086
    A list of directories to search for extra required programs. Most
    users should not need this, as programs like ``happy`` and ``alex``
    will automatically be installed and added to the path. This can be
    useful if a ``Custom`` setup script relies on an exotic extra
    program.

    The command line variant of this flag is ``--extra-prog-path=PATH``,
    which can be specified multiple times.

1087 1088
.. cfg-field:: run-tests: boolean
               --run-tests
Leonid Onokhov's avatar
Leonid Onokhov committed
1089
    :synopsis: Run package test suite upon installation.
1090 1091 1092

    :default: ``False``

1093 1094 1095 1096
    Run the package test suite upon installation. This is useful for
    saying "When this package is installed, check that the test suite
    passes, terminating the rest of the build if it is broken."

1097 1098 1099 1100 1101 1102 1103
    .. warning::

      One deficiency: the :cfg-field:`run-tests` setting of a package is NOT
      recorded as part of the hash, so if you install something without
      :cfg-field:`run-tests` and then turn on ``run-tests``, we won't
      subsequently test the package. If this is causing you problems, give
      us a shout.
1104 1105 1106 1107

    The command line variant of this flag is ``--run-tests``.

Object code options
1108
^^^^^^^^^^^^^^^^^^^
1109

1110 1111
.. cfg-field:: debug-info: integer
               --enable-debug-info=<n>
1112
               --disable-debug-info
Leonid Onokhov's avatar
Leonid Onokhov committed
1113
    :synopsis: Build with debug info enabled.
1114 1115 1116 1117
    :since: 1.22

    :default: False

1118 1119
    If the compiler (e.g., GHC 7.10 and later) supports outputing OS
    native debug info (e.g., DWARF), setting ``debug-info: True`` will
1120 1121
    instruct it to do so. See the GHC wiki page on :ghc-wiki:`DWARF`
    for more information about this feature.
1122

1123 1124
    (This field also accepts numeric syntax, but until GHC 8.2 this didn't
    do anything.)
1125 1126 1127 1128

    The command line variant of this flag is ``--enable-debug-info`` and
    ``--disable-debug-info``.

Ben Gamari's avatar
Ben Gamari committed
1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147
.. cfg-field:: split-sections: boolean
               --enable-split-sections
               --disable-split-sections
    :synopsis: Use GHC's split sections feature.
    :since: 2.1

    :default: False

    Use the GHC ``-split-sections`` feature when building the library. This
    reduces the final size of the executables that use the library by
    allowing them to link with only the bits that they use rather than
    the entire library. The downside is that building the library takes
    longer and uses a bit more memory.

    This feature is supported by GHC 8.0 and later.

    The command line variant of this flag is ``--enable-split-sections`` and
    ``--disable-split-sections``.

1148 1149 1150
.. cfg-field:: split-objs: boolean
               --enable-split-objs
               --disable-split-objs
Ben Gamari's avatar
Ben Gamari committed
1151
    :synopsis: Use GHC's split objects feature.
1152 1153 1154

    :default: False

1155 1156 1157 1158 1159 1160
    Use the GHC ``-split-objs`` feature when building the library. This
    reduces the final size of the executables that use the library by
    allowing them to link with only the bits that they use rather than
    the entire library. The downside is that building the library takes
    longer and uses considerably more memory.

Ben Gamari's avatar
Ben Gamari committed
1161 1162 1163
    It is generally recommend that you use ``split-sections`` instead
    of ``split-objs`` where possible.

1164 1165 1166
    The command line variant of this flag is ``--enable-split-objs`` and
    ``--disable-split-objs``.

1167 1168 1169
.. cfg-field:: executable-stripping: boolean
               --enable-executable-stripping
               --disable-executable-stripping
Leonid Onokhov's avatar
Leonid Onokhov committed
1170
    :synopsis: Strip installed programs.
1171 1172 1173

    :default: True

1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187
    When installing binary executable programs, run the ``strip``
    program on the binary. This can considerably reduce the size of the
    executable binary file. It does this by removing debugging
    information and symbols.

    Not all Haskell implementations generate native binaries. For such
    implementations this option has no effect.

    (TODO: Check what happens if you combine this with ``debug-info``.)

    The command line variant of this flag is
    ``--enable-executable-stripping`` and
    ``--disable-executable-stripping``.

1188 1189 1190
.. cfg-field:: library-stripping: boolean
               --enable-library-stripping
               --disable-library-stripping
Leonid Onokhov's avatar
Leonid Onokhov committed
1191
    :synopsis: Strip installed libraries.
1192 1193
    :since: 1.19

1194 1195 1196 1197 1198 1199 1200 1201
    When installing binary libraries, run the ``strip`` program on the
    binary, saving space on the file system. See also
    ``executable-stripping``.

    The command line variant of this flag is
    ``--enable-library-stripping`` and ``--disable-library-stripping``.

Executable options
1202
^^^^^^^^^^^^^^^^^^
1203

1204 1205
.. cfg-field:: program-prefix: prefix
               --program-prefix=prefix
Leonid Onokhov's avatar
Leonid Onokhov committed
1206
    :synopsis: Prepend prefix to program names.
1207

1208 1209 1210 1211 1212 1213 1214 1215 1216 1217
    [STRIKEOUT:Prepend *prefix* to installed program names.] (Currently
    implemented in a silly and not useful way. If you need this to work
    give us a shout.)

    *prefix* may contain the following path variables: ``$pkgid``,
    ``$pkg``, ``$version``, ``$compiler``, ``$os``, ``$arch``, ``$abi``,
    ``$abitag``

    The command line variant of this flag is ``--program-prefix=foo-``.

1218 1219
.. cfg-field:: program-suffix: suffix
               --program-suffix=suffix
Leonid Onokhov's avatar
Leonid Onokhov committed
1220
    :synopsis: Append refix to program names.
1221

1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237
    [STRIKEOUT:Append *suffix* to installed program names.] (Currently
    implemented in a silly and not useful way. If you need this to work
    give us a shout.)

    The most obvious use for this is to append the program's version
    number to make it possible to install several versions of a program
    at once: ``program-suffix: $version``.

    *suffix* may contain the following path variables: ``$pkgid``,
    ``$pkg``, ``$version``, ``$compiler``, ``$os``, ``$arch``, ``$abi``,
    ``$abitag``

    The command line variant of this flag is
    ``--program-suffix='$version'``.

Dynamic linking options
1238
^^^^^^^^^^^^^^^^^^^^^^^
1239

1240 1241 1242
.. cfg-field:: shared: boolean
               --enable-shared
               --disable-shared
Leonid Onokhov's avatar
Leonid Onokhov committed
1243
    :synopsis: Build shared library.
1244 1245 1246

    :default: False

1247 1248 1249 1250 1251 1252
    Build shared library. This implies a separate compiler run to
    generate position independent code as required on most platforms.

    The command line variant of this flag is ``--enable-shared`` and
    ``--disable-shared``.

1253 1254 1255
.. cfg-field:: executable-dynamic: boolean
               --enable-executable-dynamic
               --disable-executable-dynamic
Leonid Onokhov's avatar
Leonid Onokhov committed
1256
    :synopsis: Link executables dynamically.
1257 1258 1259

    :default: False

1260 1261 1262 1263 1264 1265 1266 1267
    Link executables dynamically. The executable's library dependencies
    should be built as shared objects. This implies ``shared: True``
    unless ``shared: False`` is explicitly specified.

    The command line variant of this flag is
    ``--enable-executable-dynamic`` and
    ``--disable-executable-dynamic``.

1268 1269 1270
.. cfg-field:: library-for-ghci: boolean
               --enable-library-for-ghci
               --disable-library-for-ghci
Leonid Onokhov's avatar
Leonid Onokhov committed
1271
    :synopsis: Build libraries suitable for use with GHCi.
1272 1273 1274

    :default: True

1275 1276 1277 1278 1279 1280 1281