1. 10 Jun, 2019 1 commit
    • Richard Eisenberg's avatar
      GHCi support for levity-polymorphic join points · 392210bf
      Richard Eisenberg authored
      Fixes #16509.
      
      See Note [Levity-polymorphic join points] in ByteCodeGen,
      which tells the full story.
      
      This commit also adds some comments and cleans some code
      in the byte-code generator, as I was exploring around trying
      to understand it.
      
      test case: ghci/scripts/T16509
      392210bf
  2. 24 Feb, 2019 1 commit
    • Simon Peyton Jones's avatar
      Add AnonArgFlag to FunTy · 6cce36f8
      Simon Peyton Jones authored
      The big payload of this patch is:
      
        Add an AnonArgFlag to the FunTy constructor
        of Type, so that
          (FunTy VisArg   t1 t2) means (t1 -> t2)
          (FunTy InvisArg t1 t2) means (t1 => t2)
      
      The big payoff is that we have a simple, local test to make
      when decomposing a type, leading to many fewer calls to
      isPredTy. To me the code seems a lot tidier, and probably
      more efficient (isPredTy has to take the kind of the type).
      
      See Note [Function types] in TyCoRep.
      
      There are lots of consequences
      
      * I made FunTy into a record, so that it'll be easier
        when we add a linearity field, something that is coming
        down the road.
      
      * Lots of code gets touched in a routine way, simply because it
        pattern matches on FunTy.
      
      * I wanted to make a pattern synonym for (FunTy2 arg res), which
        picks out just the argument and result type from the record. But
        alas the pattern-match overlap checker has a heart attack, and
        either reports false positives, or takes too long.  In the end
        I gave up on pattern synonyms.
      
        There's some commented-out code in TyCoRep that shows what I
        wanted to do.
      
      * Much more clarity about predicate types, constraint types
        and (in particular) equality constraints in kinds.  See TyCoRep
        Note [Types for coercions, predicates, and evidence]
        and Note [Constraints in kinds].
      
        This made me realise that we need an AnonArgFlag on
        AnonTCB in a TyConBinder, something that was really plain
        wrong before. See TyCon Note [AnonTCB InivsArg]
      
      * When building function types we must know whether we
        need VisArg (mkVisFunTy) or InvisArg (mkInvisFunTy).
        This turned out to be pretty easy in practice.
      
      * Pretty-printing of types, esp in IfaceType, gets
        tidier, because we were already recording the (->)
        vs (=>) distinction in an ad-hoc way.  Death to
        IfaceFunTy.
      
      * mkLamType needs to keep track of whether it is building
        (t1 -> t2) or (t1 => t2).  See Type
        Note [mkLamType: dictionary arguments]
      
      Other minor stuff
      
      * Some tidy-up in validity checking involving constraints;
        Trac #16263
      6cce36f8
  3. 22 Nov, 2018 1 commit
    • David Eichmann's avatar
      Fix unused-import warnings · 6353efc7
      David Eichmann authored
      This patch fixes a fairly long-standing bug (dating back to 2015) in
      RdrName.bestImport, namely
      
         commit 9376249b
         Author: Simon Peyton Jones <simonpj@microsoft.com>
         Date:   Wed Oct 28 17:16:55 2015 +0000
      
         Fix unused-import stuff in a better way
      
      In that patch got the sense of the comparison back to front, and
      thereby failed to implement the unused-import rules described in
        Note [Choosing the best import declaration] in RdrName
      
      This led to Trac #13064 and #15393
      
      Fixing this bug revealed a bunch of unused imports in libraries;
      the ones in the GHC repo are part of this commit.
      
      The two important changes are
      
      * Fix the bug in bestImport
      
      * Modified the rules by adding (a) in
           Note [Choosing the best import declaration] in RdrName
        Reason: the previosu rules made Trac #5211 go bad again.  And
        the new rule (a) makes sense to me.
      
      In unravalling this I also ended up doing a few other things
      
      * Refactor RnNames.ImportDeclUsage to use...
      6353efc7
  4. 17 Nov, 2018 1 commit
  5. 02 Nov, 2018 1 commit
    • Michal Terepeta's avatar
      Add Int8# and Word8# · 2c959a18
      Michal Terepeta authored
      This is the first step of implementing:
      https://github.com/ghc-proposals/ghc-proposals/pull/74
      
      
      
      The main highlights/changes:
      
          primops.txt.pp gets two new sections for two new primitive types for
          signed and unsigned 8-bit integers (Int8# and Word8 respectively) along
          with basic arithmetic and comparison operations. PrimRep/RuntimeRep get
          two new constructors for them. All of the primops translate into the
          existing MachOPs.
      
          For CmmCalls the codegen will now zero-extend the values at call
          site (so that they can be moved to the right register) and then truncate
          them back their original width.
      
          x86 native codegen needed some updates, since it wasn't able to deal
          with the new widths, but all the changes are quite localized. LLVM
          backend seems to just work.
      
      This is the second attempt at merging this, after the first attempt in
      D4475 had to be backed out due to regressions on i386.
      
      Bumps binary submodule.
      Signed-off-by: Michal Terepeta's avatarMichal Terepeta <michal.terepeta@gmail.com>
      
      Test Plan: ./validate (on both x86-{32,64})
      
      Reviewers: bgamari, hvr, goldfire, simonmar
      
      Subscribers: rwbarton, carter
      
      Differential Revision: https://phabricator.haskell.org/D5258
      2c959a18
  6. 09 Oct, 2018 1 commit
    • Ben Gamari's avatar
      Revert "Add Int8# and Word8#" · d728c3c5
      Ben Gamari authored
      This unfortunately broke i386 support since it introduced references to
      byte-sized registers that don't exist on that architecture.
      
      Reverts binary submodule
      
      This reverts commit 5d5307f9.
      d728c3c5
  7. 07 Oct, 2018 1 commit
    • Michal Terepeta's avatar
      Add Int8# and Word8# · 5d5307f9
      Michal Terepeta authored
      This is the first step of implementing:
      https://github.com/ghc-proposals/ghc-proposals/pull/74
      
      
      
      The main highlights/changes:
      
      - `primops.txt.pp` gets two new sections for two new primitive types
        for signed and unsigned 8-bit integers (`Int8#` and `Word8`
        respectively) along with basic arithmetic and comparison
        operations. `PrimRep`/`RuntimeRep` get two new constructors for
        them. All of the primops translate into the existing `MachOP`s.
      
      - For `CmmCall`s the codegen will now zero-extend the values at call
        site (so that they can be moved to the right register) and then
        truncate them back their original width.
      
      - x86 native codegen needed some updates, since it wasn't able to deal
        with the new widths, but all the changes are quite localized. LLVM
        backend seems to just work.
      
      Bumps binary submodule.
      Signed-off-by: Michal Terepeta's avatarMichal Terepeta <michal.terepeta@gmail.com>
      
      Test Plan: ./validate with new tests
      
      Reviewers: hvr, goldfire, bgamari, simonmar
      
      Subscribers: Abhiroop, dfeuer, rwbarton, thomie, carter
      
      Differential Revision: https://phabricator.haskell.org/D4475
      5d5307f9
  8. 19 Sep, 2017 1 commit
    • Herbert Valerio Riedel's avatar
      compiler: introduce custom "GhcPrelude" Prelude · f63bc730
      Herbert Valerio Riedel authored
      This switches the compiler/ component to get compiled with
      -XNoImplicitPrelude and a `import GhcPrelude` is inserted in all
      modules.
      
      This is motivated by the upcoming "Prelude" re-export of
      `Semigroup((<>))` which would cause lots of name clashes in every
      modulewhich imports also `Outputable`
      
      Reviewers: austin, goldfire, bgamari, alanz, simonmar
      
      Reviewed By: bgamari
      
      Subscribers: goldfire, rwbarton, thomie, mpickering, bgamari
      
      Differential Revision: https://phabricator.haskell.org/D3989
      f63bc730
  9. 02 Jun, 2017 1 commit
    • Ryan Scott's avatar
      Use lengthIs and friends in more places · a786b136
      Ryan Scott authored
      While investigating #12545, I discovered several places in the code
      that performed length-checks like so:
      
      ```
      length ts == 4
      ```
      
      This is not ideal, since the length of `ts` could be much longer than 4,
      and we'd be doing way more work than necessary! There are already a slew
      of helper functions in `Util` such as `lengthIs` that are designed to do
      this efficiently, so I found every place where they ought to be used and
      did just that. I also defined a couple more utility functions for list
      length that were common patterns (e.g., `ltLength`).
      
      Test Plan: ./validate
      
      Reviewers: austin, hvr, goldfire, bgamari, simonmar
      
      Reviewed By: bgamari, simonmar
      
      Subscribers: goldfire, rwbarton, thomie
      
      Differential Revision: https://phabricator.haskell.org/D3622
      a786b136
  10. 31 Mar, 2017 1 commit
    • Ben Gamari's avatar
      Clean up coreView/tcView. · 6575f4b6
      Ben Gamari authored
      In Core, Constraint should be considered fully equal to
      TYPE LiftedRep, in all ways. Accordingly, coreView should
      unwrap Constraint to become TYPE LiftedRep. Of course, this
      would be a disaster in the type checker.
      
      So, where previously we used coreView in both the type checker
      and in Core, we now have coreView and tcView, which differ only
      in their treatment of Constraint.
      
      Historical note: once upon a past, we had tcView distinct from
      coreView. Back then, it was because newtypes were unwrapped in
      Core but not in the type checker. The distinction is back, but
      for a different reason than before.
      
      This had a few knock-on effects:
      
       * The Typeable solver must explicitly handle Constraint to ensure
         that we produce the correct evidence.
      
       * TypeMap now respects the Constraint/Type distinction
      
      Finished by: bgamari
      
      Test Plan: ./validate
      
      Reviewers: simonpj, austin, bgamari
      
      Reviewed By: simonpj
      
      Subscribers: rwbarton, thomie
      
      Differential Revision: https://phabricator.haskell.org/D3316
      6575f4b6
  11. 27 Mar, 2017 1 commit
    • Richard Eisenberg's avatar
      Fix #13458 · cea71418
      Richard Eisenberg authored
      Core Lint shouldn't check representations of types that don't
      have representations.
      
      test case: typecheck/should_compile/T13458
      cea71418
  12. 19 Jan, 2017 1 commit
    • Richard Eisenberg's avatar
      Update levity polymorphism · e7985ed2
      Richard Eisenberg authored
      This commit implements the proposal in
      https://github.com/ghc-proposals/ghc-proposals/pull/29 and
      https://github.com/ghc-proposals/ghc-proposals/pull/35.
      
      Here are some of the pieces of that proposal:
      
      * Some of RuntimeRep's constructors have been shortened.
      
      * TupleRep and SumRep are now parameterized over a list of RuntimeReps.
      * This
      means that two types with the same kind surely have the same
      representation.
      Previously, all unboxed tuples had the same kind, and thus the fact
      above was
      false.
      
      * RepType.typePrimRep and friends now return a *list* of PrimReps. These
      functions can now work successfully on unboxed tuples. This change is
      necessary because we allow abstraction over unboxed tuple types and so
      cannot
      always handle unboxed tuples specially as we did before.
      
      * We sometimes have to create an Id from a PrimRep. I thus split PtrRep
      * into
      LiftedRep and UnliftedRep, so that the created Ids have the right
      strictness.
      
      * The RepType.RepType type was removed, as it didn't seem to help with
      * much.
      
      * The RepType.repType function is also removed, in favor of typePrimRep.
      
      * I have waffled a good deal on whether or not to keep VoidRep in
      TyCon.PrimRep. In the end, I decided to keep it there. PrimRep is *not*
      represented in RuntimeRep, and typePrimRep will never return a list
      including
      VoidRep. But it's handy to have in, e.g., ByteCodeGen and friends. I can
      imagine another design choice where we have a PrimRepV type that is
      PrimRep
      with an extra constructor. That seemed to be a heavier design, though,
      and I'm
      not sure what the benefit would be.
      
      * The last, unused vestiges of # (unliftedTypeKind) have been removed.
      
      * There were several pretty-printing bugs that this change exposed;
      * these are fixed.
      
      * We previously checked for levity polymorphism in the types of binders.
      * But we
      also must exclude levity polymorphism in function arguments. This is
      hard to check
      for, requiring a good deal of care in the desugarer. See Note [Levity
      polymorphism
      checking] in DsMonad.
      
      * In order to efficiently check for levity polymorphism in functions, it
      * was necessary
      to add a new bit of IdInfo. See Note [Levity info] in IdInfo.
      
      * It is now safe for unlifted types to be unsaturated in Core. Core Lint
      * is updated
      accordingly.
      
      * We can only know strictness after zonking, so several checks around
      * strictness
      in the type-checker (checkStrictBinds, the check for unlifted variables
      under a ~
      pattern) have been moved to the desugarer.
      
      * Along the way, I improved the treatment of unlifted vs. banged
      * bindings. See
      Note [Strict binds checks] in DsBinds and #13075.
      
      * Now that we print type-checked source, we must be careful to print
      * ConLikes correctly.
      This is facilitated by a new HsConLikeOut constructor to HsExpr.
      Particularly troublesome
      are unlifted pattern synonyms that get an extra void# argument.
      
      * Includes a submodule update for haddock, getting rid of #.
      
      * New testcases:
        typecheck/should_fail/StrictBinds
        typecheck/should_fail/T12973
        typecheck/should_run/StrictPats
        typecheck/should_run/T12809
        typecheck/should_fail/T13105
        patsyn/should_fail/UnliftedPSBind
        typecheck/should_fail/LevPolyBounded
        typecheck/should_compile/T12987
        typecheck/should_compile/T11736
      
      * Fixed tickets:
        #12809
        #12973
        #11736
        #13075
        #12987
      
      * This also adds a test case for #13105. This test case is
      * "compile_fail" and
      succeeds, because I want the testsuite to monitor the error message.
      When #13105 is fixed, the test case will compile cleanly.
      e7985ed2
  13. 15 Sep, 2016 1 commit
    • Ben Gamari's avatar
      Unify CallStack handling in ghc · 626db8f8
      Ben Gamari authored
      Here we introduce compatibility wrappers for HasCallStack constraints.
      This is necessary as we must support GHC 7.10.1 which lacks sane call
      stack support. We also introduce another constraint synonym,
      HasDebugCallStack, which only provides a call stack when DEBUG is set.
      626db8f8
  14. 09 Aug, 2016 1 commit
  15. 21 Jul, 2016 1 commit
    • Ömer Sinan Ağacan's avatar
      Implement unboxed sum primitive type · 714bebff
      Ömer Sinan Ağacan authored
      Summary:
      This patch implements primitive unboxed sum types, as described in
      https://ghc.haskell.org/trac/ghc/wiki/UnpackedSumTypes.
      
      Main changes are:
      
      - Add new syntax for unboxed sums types, terms and patterns. Hidden
        behind `-XUnboxedSums`.
      
      - Add unlifted unboxed sum type constructors and data constructors,
        extend type and pattern checkers and desugarer.
      
      - Add new RuntimeRep for unboxed sums.
      
      - Extend unarise pass to translate unboxed sums to unboxed tuples right
        before code generation.
      
      - Add `StgRubbishArg` to `StgArg`, and a new type `CmmArg` for better
        code generation when sum values are involved.
      
      - Add user manual section for unboxed sums.
      
      Some other changes:
      
      - Generalize `UbxTupleRep` to `MultiRep` and `UbxTupAlt` to
        `MultiValAlt` to be able to use those with both sums and tuples.
      
      - Don't use `tyConPrimRep` in `isVoidTy`: `tyConPrimRep` is really
        wrong, given an `Any` `TyCon`, there's no way to tell what its kind
        is, but `kindPrimRep` and in turn `tyConPrimRep` returns `PtrRep`.
      
      - Fix some bugs on the way: #12375.
      
      Not included in this patch:
      
      - Update Haddock for new the new unboxed sum syntax.
      
      - `TemplateHaskell` support is left as future work.
      
      For reviewers:
      
      - Front-end code is mostly trivial and adapted from unboxed tuple code
        for type checking, pattern checking, renaming, desugaring etc.
      
      - Main translation routines are in `RepType` and `UnariseStg`.
        Documentation in `UnariseStg` should be enough for understanding
        what's going on.
      
      Credits:
      
      - Johan Tibell wrote the initial front-end and interface file
        extensions.
      
      - Simon Peyton Jones reviewed this patch many times, wrote some code,
        and helped with debugging.
      
      Reviewers: bgamari, alanz, goldfire, RyanGlScott, simonpj, austin,
                 simonmar, hvr, erikd
      
      Reviewed By: simonpj
      
      Subscribers: Iceland_jack, ggreif, ezyang, RyanGlScott, goldfire,
                   thomie, mpickering
      
      Differential Revision: https://phabricator.haskell.org/D2259
      714bebff