ghc.mk 48.5 KB
Newer Older
1 2
# -----------------------------------------------------------------------------
#
3
# (c) 2009-2013 The University of Glasgow
4 5 6 7
#
# This file is part of the GHC build system.
#
# To understand how the build system works and how to modify it, see
8 9
#      http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture
#      http://ghc.haskell.org/trac/ghc/wiki/Building/Modifying
10 11 12
#
# -----------------------------------------------------------------------------

Ian Lynagh's avatar
Ian Lynagh committed
13 14 15
# ToDo List.
#
#   * remove old Makefiles, add new stubs for building in subdirs
Simon Marlow's avatar
Simon Marlow committed
16 17 18 19 20 21 22
#     * docs/Makefile
#     * docs/docbook-cheat-sheet/Makefile
#     * docs/man/Makefile
#     * docs/storage-mgmt/Makefile
#     * docs/vh/Makefile
#     * rts/dotnet/Makefile
#     * utils/Makefile
Ian Lynagh's avatar
Ian Lynagh committed
23 24 25 26 27 28 29 30 31 32 33
#   * add Makefiles for the rest of the utils/ programs that aren't built
#     by default (need to exclude them from 'make all' too)

# Possible cleanups:
#
#   * per-source-file dependencies instead of one .depend file?
#   * eliminate undefined variables, and use --warn-undefined-variables?
#   * put outputs from different ways in different subdirs of distdir/build,
#     then we don't have to use -osuf/-hisuf.  We would have to install
#     them in different places too, so we'd need ghc-pkg support for packages
#     of different ways.
34
#   * make PACKAGES_STAGE1 generated by './configure' or './boot'?
Ian Lynagh's avatar
Ian Lynagh committed
35 36 37 38 39 40
#   * we should use a directory of package.conf files rather than a single
#     file for the inplace package database, so that we can express
#     dependencies more accurately.  Otherwise it's possible to get into
#     a state where the package database is out of date, and the build
#     system doesn't know.

Simon Marlow's avatar
Simon Marlow committed
41 42 43 44
# Approximate build order.
#
# The actual build order is defined by dependencies, and the phase
# ordering used to ensure correct ordering of makefile-generation; see
45
#    http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
Ian Lynagh's avatar
Ian Lynagh committed
46 47 48
#
#     * With bootstrapping compiler:
#           o Build utils/ghc-cabal
Simon Marlow's avatar
Simon Marlow committed
49
#           o Build utils/ghc-pkg
Ian Lynagh's avatar
Ian Lynagh committed
50 51
#           o Build utils/hsc2hs
#     * For each package:
Simon Marlow's avatar
Simon Marlow committed
52
#	    o configure, generate package-data.mk and inplace-pkg-info
Ian Lynagh's avatar
Ian Lynagh committed
53
#           o register each package into inplace/lib/package.conf
54
#     * build libffi (if not disabled by --with-system-libffi)
Simon Marlow's avatar
Simon Marlow committed
55
#     * With bootstrapping compiler:
56
#	    o Build libraries/{filepath,hpc,Cabal}
Simon Marlow's avatar
Simon Marlow committed
57
#           o Build compiler (stage 1)
Ian Lynagh's avatar
Ian Lynagh committed
58 59
#     * With stage 1:
#           o Build libraries/*
Simon Marlow's avatar
Simon Marlow committed
60
#	    o Build rts
Ian Lynagh's avatar
Ian Lynagh committed
61 62 63 64
#           o Build utils/* (except haddock)
#           o Build compiler (stage 2)
#     * With stage 2:
#           o Build utils/haddock
Simon Marlow's avatar
Simon Marlow committed
65
#           o Build compiler (stage 3) (optional)
Ian Lynagh's avatar
Ian Lynagh committed
66 67 68 69
#     * With haddock:
#           o libraries/*
#           o compiler

70 71
.PHONY: default all haddock

72 73
# We need second expansion for the way we handle directories, so that
#     | $$$$(dir $$$$@)/.
Ian Lynagh's avatar
Ian Lynagh committed
74
# expands to the directory of a rule that uses a % pattern.
75 76
.SECONDEXPANSION:

Ian Lynagh's avatar
Ian Lynagh committed
77 78
default : all

79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95

##################################################
# Check that we have a new enough 'make'

HAVE_EVAL := NO
$(eval HAVE_EVAL := YES)

ifeq "$(HAVE_EVAL)" "NO"
$(error Your make does not support eval. You need GNU make >= 3.81)
endif

ifeq "$(abspath /)" ""
$(error Your make does not support abspath. You need GNU make >= 3.81)
endif
##################################################


96 97 98 99
# Catch make if it runs away into an infinite loop
ifeq      "$(MAKE_RESTARTS)" ""
else ifeq "$(MAKE_RESTARTS)" "1"
else
100
$(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug? See http://ghc.haskell.org/trac/ghc/wiki/Building/Troubleshooting#Makehasrestarteditself3timesisthereamakefilebug for details)
101 102
endif

103 104 105 106
ifneq "$(CLEANING)" "YES"
CLEANING = NO
endif

Ian Lynagh's avatar
Ian Lynagh committed
107 108 109 110 111 112 113 114 115 116 117 118 119 120
# -----------------------------------------------------------------------------
# Misc GNU make utils

nothing=
space=$(nothing) $(nothing)
comma=,

# Cancel all suffix rules.  Ideally we'd like to have 'make -r' turned on
# by default, because that disables all the implicit rules, but there doesn't
# seem to be a good way to do that.  This turns off all the old-style suffix
# rules, which does half the job and speeds up make quite a bit:
.SUFFIXES:

# -----------------------------------------------------------------------------
121 122
# Makefile debugging
#
Ian Lynagh's avatar
Ian Lynagh committed
123 124 125 126 127 128 129
# to see the effective value used for a Makefile variable, do
#  make show VALUE=MY_VALUE
#

show:
	@echo '$(VALUE)="$($(VALUE))"'

130 131 132 133 134 135 136 137
# echo is used by the nightly builders to query the build system for
# information.
# Using printf means that we don't get a trailing newline. We escape
# backslashes and double quotes in the string to protect them from the
# shell, and percent signs to protect them from printf.
echo:
	@printf "$(subst %,%%,$(subst ",\",$(subst \,\\\\,$($(VALUE)))))"

Ian Lynagh's avatar
Ian Lynagh committed
138 139 140
# -----------------------------------------------------------------------------
# Include subsidiary build-system bits

141 142
include mk/tree.mk

143
ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
Ian Lynagh's avatar
Ian Lynagh committed
144 145 146 147
include mk/config.mk
ifeq "$(ProjectVersion)" ""
$(error Please run ./configure first)
endif
148
endif
Ian Lynagh's avatar
Ian Lynagh committed
149

150 151
include mk/ways.mk

Ian Lynagh's avatar
Ian Lynagh committed
152 153 154
# (Optional) build-specific configuration
include mk/custom-settings.mk

155
ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
156
ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
157
ifeq "$(findstring dyn,$(GhcLibWays))" ""
158
$(error dyn is not in $$(GhcLibWays), but $$(DYNAMIC_GHC_PROGRAMS) is YES)
159 160 161
endif
else
ifeq "$(findstring v,$(GhcLibWays))" ""
162
$(error v is not in $$(GhcLibWays), and $$(DYNAMIC_GHC_PROGRAMS) is not YES)
163
endif
Ian Lynagh's avatar
Ian Lynagh committed
164
endif
165 166 167 168 169
ifeq "$(GhcProfiled)" "YES"
ifeq "$(findstring p,$(GhcLibWays))" ""
$(error p is not in $$(GhcLibWays), and $$(GhcProfiled) is YES)
endif
endif
170
endif
Ian Lynagh's avatar
Ian Lynagh committed
171

172 173 174 175
ifeq "$(phase)" ""
phase = final
endif

176 177 178
# -----------------------------------------------------------------------------
# Utility definitions

179
include rules/prof.mk
180
include rules/trace.mk
181
include rules/library-path.mk
182
include rules/add-dependency.mk
183
include rules/make-command.mk
184
include rules/pretty_commands.mk
185

Ian Lynagh's avatar
Ian Lynagh committed
186 187 188 189 190 191 192 193 194
# -----------------------------------------------------------------------------
# Macros for standard targets

include rules/all-target.mk
include rules/clean-target.mk

# -----------------------------------------------------------------------------
# The inplace tree

195
$(eval $(call clean-target,root,inplace,inplace/bin inplace/lib))
Ian Lynagh's avatar
Ian Lynagh committed
196 197 198 199 200 201 202 203 204 205 206

# -----------------------------------------------------------------------------
# Whether to build dependencies or not

# When we're just doing 'make clean' or 'make show', then we don't need
# to build dependencies.

ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
NO_INCLUDE_DEPS = YES
NO_INCLUDE_PKGDATA = YES
endif
Ian Lynagh's avatar
Ian Lynagh committed
207 208 209 210
ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
NO_INCLUDE_DEPS = YES
NO_INCLUDE_PKGDATA = YES
endif
Ian Lynagh's avatar
Ian Lynagh committed
211 212 213 214 215 216 217 218 219 220 221 222 223
ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
NO_INCLUDE_DEPS = YES
# We want package-data.mk for show
endif

# -----------------------------------------------------------------------------
# Ways

include rules/way-prelims.mk

$(foreach way,$(ALL_WAYS),\
  $(eval $(call way-prelims,$(way))))

224
ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
225
GHCI_WAY = dyn
226
HADDOCK_WAY = dyn
227 228
else
GHCI_WAY = v
229
HADDOCK_WAY = v
230 231
endif

232 233 234 235 236 237 238 239 240
WINDOWS_DYN_PROG_RTS := rts
ifeq "$(GhcThreaded)" "YES"
WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_thr
endif
ifeq "$(GhcDebugged)" "YES"
WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_debug
endif
WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_dyn_LIB_NAME

Ian Lynagh's avatar
Ian Lynagh committed
241 242 243
# -----------------------------------------------------------------------------
# Compilation Flags

244
include rules/distdir-opts.mk
Ian Lynagh's avatar
Ian Lynagh committed
245 246 247 248 249 250 251 252 253 254
include rules/distdir-way-opts.mk

# -----------------------------------------------------------------------------
# Finding source files and object files

include rules/hs-sources.mk
include rules/c-sources.mk
include rules/includes-sources.mk
include rules/hs-objs.mk
include rules/c-objs.mk
255
include rules/cmm-objs.mk
Ian Lynagh's avatar
Ian Lynagh committed
256 257 258 259

# -----------------------------------------------------------------------------
# Suffix rules

260 261 262 263
# Suffix rules cause "make clean" to fail on Windows (trac #3233)
# so we don't make any when cleaning.
ifneq "$(CLEANING)" "YES"

264
include rules/hs-suffix-rules-srcdir.mk
265
include rules/hs-suffix-way-rules-srcdir.mk
266
include rules/hs-suffix-way-rules.mk
Ian Lynagh's avatar
Ian Lynagh committed
267 268
include rules/hi-rule.mk
include rules/c-suffix-rules.mk
269 270
include rules/cmm-suffix-rules.mk

271
endif # CLEANING=YES
272

Ian Lynagh's avatar
Ian Lynagh committed
273 274 275 276 277 278 279 280
# -----------------------------------------------------------------------------
# Building package-data.mk files from .cabal files

include rules/package-config.mk

# -----------------------------------------------------------------------------
# Building dependencies

281
include rules/dependencies.mk
Ian Lynagh's avatar
Ian Lynagh committed
282
include rules/build-dependencies.mk
283
include rules/include-dependencies.mk
Ian Lynagh's avatar
Ian Lynagh committed
284

285 286 287 288 289
# -----------------------------------------------------------------------------
# Dynamic library references

include rules/relative-dynlib-references.mk

Ian Lynagh's avatar
Ian Lynagh committed
290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311
# -----------------------------------------------------------------------------
# Build package-data.mk files

include rules/build-package-data.mk

# -----------------------------------------------------------------------------
# Build and install a program

include rules/build-prog.mk
include rules/shell-wrapper.mk

# -----------------------------------------------------------------------------
# Build a perl script

include rules/build-perl.mk

# -----------------------------------------------------------------------------
# Build a package

include rules/build-package.mk
include rules/build-package-way.mk
include rules/haddock.mk
312
include rules/tags-package.mk
313
include rules/foreachLibrary.mk
Ian Lynagh's avatar
Ian Lynagh committed
314 315

# -----------------------------------------------------------------------------
Ian Lynagh's avatar
Ian Lynagh committed
316
# Registering hand-written package descriptions (used in rts)
Ian Lynagh's avatar
Ian Lynagh committed
317 318 319 320 321 322 323 324 325 326 327 328 329 330

include rules/manual-package-config.mk

# -----------------------------------------------------------------------------
# Docs

include rules/docbook.mk

# -----------------------------------------------------------------------------
# Making bindists

include rules/bindist.mk

# -----------------------------------------------------------------------------
331 332 333 334 335 336 337 338 339 340 341 342
# Directories

# Don't try to delete directories:
.PRECIOUS: %/.

# Create build directories on demand.  NB. the | below: this indicates
# that $(MKDIRHIER) is an order-only dependency, which means that this
# rule fires after building mkdirhier, but we won't try to recreate
# directories if mkdirhier changes.
%/. : | $(MKDIRHIER)
	"$(MKDIRHIER)" $@

343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361
# -----------------------------------------------------------------------------
# Lax dependencies

ifeq "$(LAX_DEPENDENCIES)" "YES"
LAX_DEPS_FOLLOW = |
else
LAX_DEPS_FOLLOW =
endif

# This is a bit of a hack. When LAX_DEPS_FOLLOW is | some rules end up
# looking like
#     target: a | b | c
# The first | signals the start of the order-only dependencies, but make
# treats the second | as a dependency. So we need to tell make how to
# build that dependency.

.PHONY: |
| :
	@:
362

363
# -----------------------------------------------------------------------------
364 365 366 367 368 369 370 371 372
# Packages to build
# The lists of packages that we *actually* going to build in each stage:
#
#  $(PACKAGES_STAGE0) 
#  $(PACKAGES_STAGE1)
#  $(PACKAGES_STAGE2)
#
# Note that we need to add them to these variables in dependency
# order, as this is the order that they get configured in.
373

374
ifeq "$(CLEANING)" "YES"
375

376 377 378 379 380 381 382 383
define addLibraryForCleaning
# We just add all packages to both the stage 0 and stage 1 lists.
# Stage 2 gets cleaned in the same way as stage 1, so no need to
# add it there.
PACKAGES_STAGE0 += $1
PACKAGES_STAGE1 += $1
endef
$(eval $(call foreachLibrary,addLibraryForCleaning))
384

385
else
386

387 388 389 390 391
# Packages that are built by stage0. These packages are dependencies of
# programs such as GHC and ghc-pkg, that we do not assume the stage0
# compiler already has installed (or up-to-date enough).

PACKAGES_STAGE0 = Cabal/Cabal hpc bin-package-db hoopl transformers
392
ifeq "$(Windows_Host)" "NO"
393
ifneq "$(HostOS_CPP)" "ios"
394
PACKAGES_STAGE0 += terminfo
395
endif
396
endif
397

398 399 400 401 402 403 404 405 406
PACKAGES_STAGE1 += ghc-prim
PACKAGES_STAGE1 += $(INTEGER_LIBRARY)
PACKAGES_STAGE1 += base
PACKAGES_STAGE1 += filepath
PACKAGES_STAGE1 += array
PACKAGES_STAGE1 += deepseq
PACKAGES_STAGE1 += bytestring
PACKAGES_STAGE1 += containers
PACKAGES_STAGE1 += old-locale
407

408
ifeq "$(Windows_Host)" "YES"
409 410 411
PACKAGES_STAGE1 += Win32
endif
PACKAGES_STAGE1 += time
412
ifeq "$(Windows_Host)" "NO"
413
PACKAGES_STAGE1 += unix
414
endif
415

416 417 418 419 420 421 422 423 424 425
PACKAGES_STAGE1 += directory
PACKAGES_STAGE1 += process
PACKAGES_STAGE1 += hpc
PACKAGES_STAGE1 += pretty
PACKAGES_STAGE1 += template-haskell
PACKAGES_STAGE1 += Cabal/Cabal
PACKAGES_STAGE1 += binary
PACKAGES_STAGE1 += bin-package-db
PACKAGES_STAGE1 += hoopl
PACKAGES_STAGE1 += transformers
426

427 428 429 430 431
ifneq "$(CrossCompiling)" "YES"
PACKAGES_STAGE2 += old-time
PACKAGES_STAGE2 += haskell98
PACKAGES_STAGE2 += haskell2010
endif
432

433 434 435 436 437 438
# We normally install only the packages down to this point
REGULAR_INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
ifeq "$(Stage1Only)" "NO"
REGULAR_INSTALL_PACKAGES += compiler
endif
REGULAR_INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
439

440
PACKAGES_STAGE1 += xhtml
441 442
ifeq "$(Windows_Target)" "NO"
ifneq "$(TargetOS_CPP)" "ios"
443 444
PACKAGES_STAGE1 += terminfo
endif
445
endif
446 447 448 449 450 451 452 453 454
PACKAGES_STAGE1 += haskeline

# If we have built the programs with dynamic libraries, then
# ghc will be dynamically linked against haskeline.so etc, so
# we need the dynamic libraries of everything down to here
REGULAR_INSTALL_DYNLIBS := $(addprefix libraries/,$(PACKAGES_STAGE1))
REGULAR_INSTALL_DYNLIBS += $(addprefix libraries/,$(PACKAGES_STAGE2))
REGULAR_INSTALL_DYNLIBS := $(filter-out $(REGULAR_INSTALL_PACKAGES),\
                                        $(REGULAR_INSTALL_DYNLIBS))
455

456
ifneq "$(CrossCompiling)" "YES"
457 458 459 460 461 462
define addExtraPackage
ifeq "$2" "-"
# Do nothing; this package is already handled above
else ifeq "$2 $$(GhcProfiled)" "dph YES"
# Ignore the package: These packages need TH, which is incompatible
# with a profiled GHC
463
else
464
PACKAGES_STAGE2 += $1
465
endif
466
endef
467 468
$(eval $(call foreachLibrary,addExtraPackage))
endif
469

Gabor Greif's avatar
Typos  
Gabor Greif committed
470
# If we want to just install everything, then we want all the packages
471 472 473 474 475
SUPERSIZE_INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
ifeq "$(Stage1Only)" "NO"
SUPERSIZE_INSTALL_PACKAGES += compiler
endif
SUPERSIZE_INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
476

477 478 479
INSTALL_DYNLIBS  :=
ifeq "$(InstallExtraPackages)" "NO"
INSTALL_PACKAGES := $(REGULAR_INSTALL_PACKAGES)
480
ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
481 482
INSTALL_DYNLIBS := $(REGULAR_INSTALL_DYNLIBS)
endif
483
else
484 485 486 487
INSTALL_PACKAGES := $(SUPERSIZE_INSTALL_PACKAGES)
endif

endif
488

489 490
# -------------------------------------------
# Dependencies between package-data.mk files
Ian Lynagh's avatar
Ian Lynagh committed
491 492 493

# We cannot run ghc-cabal to configure a package until we have
# configured and registered all of its dependencies.  So the following
494 495
# hack forces all the configure steps to happen in exactly the following order:
#
496
#  $(PACKAGES_STAGE1) ghc(stage2) $(PACKAGES_STAGE2)
497 498 499
#
# Ideally we should use the correct dependencies here to allow more
# parallelism, but we don't know the dependencies until we've
Gabor Greif's avatar
Gabor Greif committed
500
# generated the package-data.mk files.
Ian Lynagh's avatar
Ian Lynagh committed
501
define fixed_pkg_dep
502
libraries/$1/$2/package-data.mk : $$(fixed_pkg_prev)
503
fixed_pkg_prev:=libraries/$1/$2/package-data.mk
Ian Lynagh's avatar
Ian Lynagh committed
504 505 506 507
endef

ifneq "$(BINDIST)" "YES"
fixed_pkg_prev=
508
$(foreach pkg,$(PACKAGES_STAGE1),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
509 510 511 512 513 514 515

# the GHC package doesn't live in libraries/, so we add its dependency manually:
compiler/stage2/package-data.mk: $(fixed_pkg_prev)
fixed_pkg_prev:=compiler/stage2/package-data.mk

# and continue with PACKAGES_STAGE2, which depend on GHC:
$(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
Ian Lynagh's avatar
Ian Lynagh committed
516

517 518
ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
Ian Lynagh's avatar
Ian Lynagh committed
519 520 521 522
# haddock depends on ghc and some libraries, but depending on GHC's
# package-data.mk is sufficient, as that in turn depends on all the
# libraries
utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
523
utils/ghc-pwd/dist-install/package-data.mk: compiler/stage2/package-data.mk
524
utils/ghc-cabal/dist-install/package-data.mk: compiler/stage2/package-data.mk
Ian Lynagh's avatar
Ian Lynagh committed
525

Ian Lynagh's avatar
Ian Lynagh committed
526
utils/ghctags/dist-install/package-data.mk: compiler/stage2/package-data.mk
527
utils/dll-split/dist-install/package-data.mk: compiler/stage2/package-data.mk
Ian Lynagh's avatar
Ian Lynagh committed
528
utils/hpc/dist-install/package-data.mk: compiler/stage2/package-data.mk
529
utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
Ian Lynagh's avatar
Ian Lynagh committed
530
utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
531 532
utils/compare_sizes/dist-install/package-data.mk: compiler/stage2/package-data.mk
utils/runghc/dist-install/package-data.mk: compiler/stage2/package-data.mk
533
utils/mkUserGuidePart/dist/package-data.mk: compiler/stage2/package-data.mk
Ian Lynagh's avatar
Ian Lynagh committed
534

Ian Lynagh's avatar
Ian Lynagh committed
535
# add the final package.conf dependency: ghc-prim depends on RTS
536
libraries/ghc-prim/dist-install/package-data.mk : rts/dist/package.conf.inplace
Ian Lynagh's avatar
Ian Lynagh committed
537 538
endif

539 540
# --------------------------------
# Misc package-related settings
541

ian@well-typed.com's avatar
ian@well-typed.com committed
542 543 544 545 546
# Run Haddock for the packages that will be installed. We need to handle
# compiler specially due to the different dist directory name.
$(foreach p,$(INSTALL_PACKAGES),$(eval $p_dist-install_DO_HADDOCK = YES))
compiler_stage2_DO_HADDOCK = YES

547
BOOT_PKG_CONSTRAINTS := \
548
    $(foreach d,$(PACKAGES_STAGE0),\
549 550
        $(foreach p,$(basename $(notdir $(wildcard libraries/$d/*.cabal))),\
            --constraint "$p == $(shell grep -i "^Version:" libraries/$d/$p.cabal | sed "s/[^0-9.]//g")"))
Simon Marlow's avatar
Simon Marlow committed
551

552
# The actual .a and .so/.dll files: needed for dependencies.
553
ALL_STAGE1_LIBS  = $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_v_LIB))
554
ifeq "$(BuildSharedLibs)" "YES"
555
ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_dyn_LIB))
556
endif
557
BOOT_LIBS = $(foreach lib,$(PACKAGES_STAGE0),$(libraries/$(lib)_dist-boot_v_LIB))
558

559
# ----------------------------------------
Ian Lynagh's avatar
Ian Lynagh committed
560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576
# Special magic for the ghc-prim package

# We want the ghc-prim package to include the GHC.Prim module when it
# is registered, but not when it is built, because GHC.Prim is not a
# real source module, it is built-in to GHC.  The old build system did
# this using Setup.hs, but we can't do that here, so we have a flag to
# enable GHC.Prim in the .cabal file (so that the ghc-prim package
# remains compatible with the old build system for the time being).
# GHC.Prim module in the ghc-prim package with a flag:
#
libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim

# And then we strip it out again before building the package:
define libraries/ghc-prim_PACKAGE_MAGIC
libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
endef

577
PRIMOPS_TXT_STAGE1 = compiler/stage1/build/primops.txt
Ian Lynagh's avatar
Ian Lynagh committed
578

579 580
libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $$(genprimopcode_INPLACE) $(PRIMOPS_TXT_STAGE1) | $$(dir $$@)/.
	"$(genprimopcode_INPLACE)" --make-haskell-wrappers < $(PRIMOPS_TXT_STAGE1) >$@
Ian Lynagh's avatar
Ian Lynagh committed
581

582 583
# Required so that Haddock documents the primops.
libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
Ian Lynagh's avatar
Ian Lynagh committed
584

585 586 587 588 589 590
# ----------------------------------------
# Special magic for the integer package

ifneq "$(CLEANING)" "YES"
ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
Ian Lynagh's avatar
Ian Lynagh committed
591 592
else ifeq "$(INTEGER_LIBRARY)" "integer-simple"
libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
593 594 595 596 597
else
$(error Unknown integer library: $(INTEGER_LIBRARY))
endif
endif

Ian Lynagh's avatar
Ian Lynagh committed
598 599 600 601
# -----------------------------------------------------------------------------
# Include build instructions from all subdirs

ifneq "$(BINDIST)" "YES"
602
BUILD_DIRS += utils/mkdirhier
Ian Lynagh's avatar
Ian Lynagh committed
603 604
endif

605
ifeq "$(Windows_Host)" "YES"
606
BUILD_DIRS += utils/touchy
607 608
endif

609
BUILD_DIRS += utils/unlit
610
BUILD_DIRS += utils/hp2ps
Ian Lynagh's avatar
Ian Lynagh committed
611

Ian Lynagh's avatar
Ian Lynagh committed
612
ifneq "$(GhcUnregisterised)" "YES"
613
BUILD_DIRS += driver/split
Ian Lynagh's avatar
Ian Lynagh committed
614 615
endif

Ian Lynagh's avatar
Ian Lynagh committed
616
ifneq "$(BINDIST)" "YES"
617
BUILD_DIRS += utils/genprimopcode
Ian Lynagh's avatar
Ian Lynagh committed
618 619
endif

620
BUILD_DIRS += driver
621
BUILD_DIRS += driver/ghci
622 623 624
BUILD_DIRS += driver/ghc
BUILD_DIRS += driver/haddock
BUILD_DIRS += libffi
625
BUILD_DIRS += utils/deriveConstants
626 627
BUILD_DIRS += includes
BUILD_DIRS += rts
Ian Lynagh's avatar
Ian Lynagh committed
628 629

ifneq "$(BINDIST)" "YES"
630
BUILD_DIRS += bindisttest 
631
BUILD_DIRS += utils/genapply
Ian Lynagh's avatar
Ian Lynagh committed
632 633
endif

634
ifneq "$(CLEANING)" "YES"
635 636 637 638 639 640
# These are deliberately in reverse order, so as to ensure that
# there is no need to have them in dependency order. That's important
# because it's tricky to ensure that they are in dependency order when
# cross-compiling, as some packages may only be in PACKAGES_STAGE0
# or PACKAGES_STAGE1.
BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
641
BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE1))
ian@well-typed.com's avatar
ian@well-typed.com committed
642
BUILD_DIRS += $(patsubst %, libraries/%, $(filter-out $(PACKAGES_STAGE1),$(PACKAGES_STAGE0)))
643
BUILD_DIRS += $(wildcard libraries/dph)
644 645
endif

646

647 648
ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
BUILD_DIRS += libraries/integer-gmp/gmp
649
BUILD_DIRS += libraries/integer-gmp/mkGmpDerivedConstants
Ian Lynagh's avatar
Ian Lynagh committed
650 651
else ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
BUILD_DIRS += libraries/integer-gmp/gmp
652
BUILD_DIRS += libraries/integer-gmp/mkGmpDerivedConstants
653 654
endif

655 656 657
BUILD_DIRS += utils/haddock
BUILD_DIRS += utils/haddock/doc
BUILD_DIRS += compiler
658 659
BUILD_DIRS += utils/hsc2hs
BUILD_DIRS += utils/ghc-pkg
660
BUILD_DIRS += utils/testremove
661
ifeq "$(Stage1Only)" "NO"
662
BUILD_DIRS += utils/ghctags
663
endif
664
BUILD_DIRS += utils/dll-split
665
BUILD_DIRS += utils/ghc-pwd
666
BUILD_DIRS += utils/ghc-cabal
667 668
BUILD_DIRS += utils/hpc
BUILD_DIRS += utils/runghc
669
BUILD_DIRS += ghc
Ian Lynagh's avatar
Ian Lynagh committed
670

671
ifneq "$(BINDIST)" "YES"
672
ifneq "$(CrossCompiling)-$(phase)" "YES-final"
673
BUILD_DIRS += utils/mkUserGuidePart
674
endif
675
endif
676

677 678
BUILD_DIRS += docs/users_guide
BUILD_DIRS += docs/man
679 680 681
BUILD_DIRS += utils/count_lines
BUILD_DIRS += utils/compare_sizes

Ian Lynagh's avatar
Ian Lynagh committed
682 683
# ----------------------------------------------
# Actually include all the sub-ghc.mk's
Ian Lynagh's avatar
Ian Lynagh committed
684

685
include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
Ian Lynagh's avatar
Ian Lynagh committed
686

Simon Marlow's avatar
Simon Marlow committed
687 688 689 690 691
# A useful pseudo-target (must be after the include above, because it needs
# the value of things like $(libraries/base_dist-install_v_LIB).
.PHONY: stage1_libs
stage1_libs : $(ALL_STAGE1_LIBS)

692 693 694 695 696 697 698 699 700
# ----------------------------------------------
# Per-package compiler flags
# 
# If you want to add per-package compiler flags, this 
# is the place to do it.  Do it like this for package <pkg>
#   
#   libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
#   libraries/<pkg>_dist-install_HC_OPTS += -Wwarn

701
# Add $(GhcLibHcOpts) to all package builds
702
$(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
703

704
# Add $(GhcBootLibHcOpts) to all stage0 package builds
705
$(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
706

Ian Lynagh's avatar
Ian Lynagh committed
707 708 709 710 711 712 713 714
# -----------------------------------------------------------------------------
# Bootstrapping libraries

# We need to build a few libraries with the installed GHC, since GHC itself
# and some of the tools depend on them:

ifneq "$(BINDIST)" "YES"

715
ifneq "$(BOOTSTRAPPING_CONF)" ""
Ian Lynagh's avatar
Ian Lynagh committed
716 717 718
ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
$(shell echo "[]" >$(BOOTSTRAPPING_CONF))
endif
719
endif
Ian Lynagh's avatar
Ian Lynagh committed
720

721
$(eval $(call clean-target,root,bootstrapping_conf,$(BOOTSTRAPPING_CONF)))
Ian Lynagh's avatar
Ian Lynagh committed
722 723 724 725 726

# register the boot packages in strict sequence, because running
# multiple ghc-pkgs in parallel doesn't work (registrations may get
# lost).
fixed_pkg_prev=
727
$(foreach pkg,$(PACKAGES_STAGE0),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
728 729
utils/ghc-pkg/dist/package-data.mk: $(fixed_pkg_prev)
compiler/stage1/package-data.mk:    $(fixed_pkg_prev)
730
endif
Ian Lynagh's avatar
Ian Lynagh committed
731

732
ifneq "$(BINDIST)" "YES"
733 734
# Make sure we have all the GHCi libs by the time we've built
# ghc-stage2.  DPH includes a bit of Template Haskell which needs the
Gabor Greif's avatar
Typos  
Gabor Greif committed
735
# GHCi libs, and we don't have a better way to express that dependency.
736
#
737
GHCI_LIBS = $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
738 739
	    $(compiler_stage2_GHCI_LIB)

740
ifeq "$(UseArchivesForGhci)" "NO"
741
ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
742
endif
743

Ian Lynagh's avatar
Ian Lynagh committed
744 745 746 747 748 749
ifeq "$(UseArchivesForGhci)" "YES"
GHCI_lib_way = v
else
GHCI_lib_way = GHCI
endif

Ian Lynagh's avatar
Ian Lynagh committed
750 751 752
# Deps for TH uses in libraries
$(foreach way, $(GhcLibWays),$(eval \
libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \
Ian Lynagh's avatar
Ian Lynagh committed
753
    $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \
Ian Lynagh's avatar
Ian Lynagh committed
754
  ))
Ian Lynagh's avatar
Ian Lynagh committed
755 756
endif

757 758 759 760 761 762 763 764 765 766 767 768 769
# -----------------------------------------------
# Haddock-related bits

# Build the Haddock contents and index
ifeq "$(HADDOCK_DOCS)" "YES"
libraries/dist-haddock/index.html: $(haddock_INPLACE) $(ALL_HADDOCK_FILES)
	cd libraries && sh gen_contents_index --intree
ifeq "$(phase)" "final"
$(eval $(call all-target,library_doc_index,libraries/dist-haddock/index.html))
endif
INSTALL_LIBRARY_DOCS += libraries/dist-haddock/*
endif

Ian Lynagh's avatar
Ian Lynagh committed
770 771 772
# -----------------------------------------------------------------------------
# Creating a local mingw copy on Windows

773
ifeq "$(Windows_Host)" "YES"
Ian Lynagh's avatar
Ian Lynagh committed
774 775 776 777

install : install_mingw
.PHONY: install_mingw
install_mingw : $(INPLACE_MINGW)
778
	"$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
Ian Lynagh's avatar
Ian Lynagh committed
779

Ian Lynagh's avatar
Ian Lynagh committed
780 781 782 783 784
install : install_perl
.PHONY: install_perl
install_perl : $(INPLACE_PERL)
	"$(CP)" -Rp $(INPLACE_PERL) $(prefix)

785
endif # Windows_Host
Ian Lynagh's avatar
Ian Lynagh committed
786

787
ifneq "$(BINDIST)" "YES"
788
$(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
789
    libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
790
endif # BINDIST
Ian Lynagh's avatar
Ian Lynagh committed
791 792

libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
793
                            $(PRIMOPS_TXT_STAGE1) $$(genprimopcode_INPLACE) \
794
                          | $$(dir $$@)/.
795
	"$(genprimopcode_INPLACE)" --make-haskell-source < $< > $@
Ian Lynagh's avatar
Ian Lynagh committed
796

797 798 799
.PHONY: tags
tags: tags_compiler

800 801 802
.PHONY: TAGS
TAGS: TAGS_compiler

Ian Lynagh's avatar
Ian Lynagh committed
803 804 805
# -----------------------------------------------------------------------------
# Installation

806
install: install_libs install_packages install_libexecs \
807
         install_bins install_topdirs
Ian Lynagh's avatar
Ian Lynagh committed
808 809 810
ifeq "$(HADDOCK_DOCS)" "YES"
install: install_docs
endif
Ian Lynagh's avatar
Ian Lynagh committed
811

812 813 814 815 816
define installLibsTo
# $1 = libraries to install
# $2 = directory to install to
	$(call INSTALL_DIR,$2)
	for i in $1; do \
Ian Lynagh's avatar
Ian Lynagh committed
817 818
		case $$i in \
		  *.a) \
819
		    $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,$2); \
820
		    $(RANLIB_CMD) $2/`basename $$i` ;; \
Ian Lynagh's avatar
Ian Lynagh committed
821
		  *.dll) \
822
		    $(call INSTALL_PROGRAM,$(INSTALL_OPTS),$$i,$2) ; \
823
		    $(STRIP_CMD) $2/`basename $$i` ;; \
Ian Lynagh's avatar
Ian Lynagh committed
824
		  *.so) \
825
		    $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,$2) ;; \
Ian Lynagh's avatar
Ian Lynagh committed
826
		  *.dylib) \
827
		    $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,$2);; \
Ian Lynagh's avatar
Ian Lynagh committed
828
		  *) \
829
		    $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,$2); \
Ian Lynagh's avatar
Ian Lynagh committed
830 831
		esac; \
	done
832 833 834 835 836 837 838 839 840 841
endef

install_bins: $(INSTALL_BINS)
	$(call INSTALL_DIR,"$(DESTDIR)$(bindir)")
	for i in $(INSTALL_BINS); do \
		$(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(bindir)") ;  \
	done

install_libs: $(INSTALL_LIBS)
	$(call installLibsTo, $(INSTALL_LIBS), "$(DESTDIR)$(ghclibdir)")
Ian Lynagh's avatar
Ian Lynagh committed
842 843

install_libexecs:  $(INSTALL_LIBEXECS)
844 845 846
ifeq "$(INSTALL_LIBEXECS)" ""
	@:
else
847
	$(call INSTALL_DIR,"$(DESTDIR)$(ghclibexecdir)/bin")
Ian Lynagh's avatar
Ian Lynagh committed
848
	for i in $(INSTALL_LIBEXECS); do \
849
		$(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(ghclibexecdir)/bin"); \
850
	done
851 852
# We rename ghc-stage2, so that the right program name is used in error
# messages etc.
853
	"$(MV)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc-stage$(INSTALL_GHC_STAGE)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc"
854
endif
855 856

install_topdirs: $(INSTALL_TOPDIRS)
857
	$(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
858
	for i in $(INSTALL_TOPDIRS); do \
859
		$(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(topdir)"); \
Ian Lynagh's avatar
Ian Lynagh committed
860 861
	done

862
install_docs: $(INSTALL_DOCS)
863
	$(call INSTALL_DIR,"$(DESTDIR)$(docdir)")
864
ifneq "$(INSTALL_DOCS)" ""
865
	for i in $(INSTALL_DOCS); do \
866
		$(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)"); \
867
	done
868
endif
869 870
	$(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html")
	$(call INSTALL_DOC,$(INSTALL_OPTS),docs/index.html,"$(DESTDIR)$(docdir)/html")
871
ifneq "$(INSTALL_LIBRARY_DOCS)" ""
872
	$(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/libraries")
873
	for i in $(INSTALL_LIBRARY_DOCS); do \
874
		$(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)/html/libraries/"); \
875
	done
876 877
	$(call INSTALL_DATA,$(INSTALL_OPTS),libraries/prologue.txt,"$(DESTDIR)$(docdir)/html/libraries/")
	$(call INSTALL_SCRIPT,$(INSTALL_OPTS),libraries/gen_contents_index,"$(DESTDIR)$(docdir)/html/libraries/")
878 879
endif
ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
880
	for i in $(INSTALL_HTML_DOC_DIRS); do \
881 882
		$(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
		$(call INSTALL_DOC,$(INSTALL_OPTS),$$i/*,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
883
	done
884
endif
885

886
INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
Ian Lynagh's avatar
Ian Lynagh committed
887 888 889

# Install packages in the right order, so that ghc-pkg doesn't complain.
# Also, install ghc-pkg first.
890
ifeq "$(Windows_Host)" "NO"
891 892
INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc
INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc-pkg
Ian Lynagh's avatar
Ian Lynagh committed
893
else
Simon Marlow's avatar
Simon Marlow committed
894
INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
Ian Lynagh's avatar
Ian Lynagh committed
895 896 897
INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
endif

898
# Set the INSTALL_DISTDIR_p for each package; compiler is special
899
$(foreach p,$(filter-out compiler,$(INSTALL_PACKAGES)),\
900
   $(eval INSTALL_DISTDIR_$p = dist-install))
Ian Lynagh's avatar
Ian Lynagh committed
901 902
INSTALL_DISTDIR_compiler = stage2

903
# Now we can do the installation
Ian Lynagh's avatar
Ian Lynagh committed
904
install_packages: install_libexecs
905
install_packages: rts/dist/package.conf.install
906
	$(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
907
	$(call removeTrees,"$(INSTALLED_PACKAGE_CONF)")
908
	$(call INSTALL_DIR,"$(INSTALLED_PACKAGE_CONF)")
909 910
	$(call INSTALL_DIR,"$(DESTDIR)$(topdir)/rts-1.0")
	$(call installLibsTo, $(RTS_INSTALL_LIBS), "$(DESTDIR)$(topdir)/rts-1.0")
911
	$(foreach p, $(INSTALL_DYNLIBS), \
912
	    $(call installLibsTo, $(wildcard $p/dist-install/build/*.so $p/dist-install/build/*.dll $p/dist-install/build/*.dylib), "$(DESTDIR)$(topdir)/$($p_PACKAGE)-$($p_dist-install_VERSION)"))
913
	$(foreach p, $(INSTALL_PACKAGES),                             \
914
	    $(call make-command,                                      \
915
	           "$(ghc-cabal_INPLACE)" copy                        \
916
	                                  $p $(INSTALL_DISTDIR_$p)    \
ian@well-typed.com's avatar
ian@well-typed.com committed
917
	                                  "$(STRIP_CMD)"              \
918 919 920
	                                  '$(DESTDIR)'                \
	                                  '$(prefix)'                 \
	                                  '$(ghclibdir)'              \
921 922
	                                  '$(docdir)/html/libraries'  \
	                                  '$(GhcLibWays)'))
923
	"$(INSTALLED_GHC_PKG_REAL)" --force --global-package-db "$(INSTALLED_PACKAGE_CONF)" update rts/dist/package.conf.install
924
	$(foreach p, $(INSTALL_PACKAGES),                             \
925
	    $(call make-command,                                      \
926
	           "$(ghc-cabal_INPLACE)" register                    \
ian@well-typed.com's avatar
ian@well-typed.com committed
927
	                                  $p $(INSTALL_DISTDIR_$p)    \
928 929 930 931 932 933 934 935
	                                  "$(INSTALLED_GHC_REAL)"     \
	                                  "$(INSTALLED_GHC_PKG_REAL)" \
	                                  "$(DESTDIR)$(topdir)"       \
	                                  '$(DESTDIR)'                \
	                                  '$(prefix)'                 \
	                                  '$(ghclibdir)'              \
	                                  '$(docdir)/html/libraries'  \
	                                  $(RelocatableBuild)))
936
# when we install the packages above, ghc-pkg obeys umask when creating
937 938 939 940 941
# the package.conf files, but for everything else we specify the
# permissions. We therefore now fix the permissions of package.cache.
# This means "sudo make install" does the right thing even if it runs
# with an 077 umask.
	for f in '$(INSTALLED_PACKAGE_CONF)'/*; do $(CREATE_DATA) "$$f"; done
Ian Lynagh's avatar
Ian Lynagh committed
942 943 944 945

# -----------------------------------------------------------------------------
# Binary distributions

Simon Marlow's avatar
Simon Marlow committed
946 947 948 949
ifneq "$(CLEANING)" "YES"
# This rule seems to hold some files open on Windows which prevents
# cleaning, perhaps due to the $(wildcard).

Ian Lynagh's avatar
Ian Lynagh committed
950
$(eval $(call bindist,.,\
Ian Lynagh's avatar
Ian Lynagh committed
951
    LICENSE \
952 953
    README \
    INSTALL \
Ian Lynagh's avatar
Ian Lynagh committed
954
    configure config.sub config.guess install-sh \
955
    settings.in \
956
    packages \
Ian Lynagh's avatar
Ian Lynagh committed
957 958 959
    Makefile \
    mk/config.mk.in \
    $(INPLACE_BIN)/mkdirhier \
960
    utils/ghc-cabal/dist-install/build/tmp/ghc-cabal \
961
    utils/ghc-pwd/dist-install/build/tmp/ghc-pwd \
Ian Lynagh's avatar
Ian Lynagh committed
962 963 964 965 966
    $(BINDIST_WRAPPERS) \
    $(BINDIST_PERL_SOURCES) \
    $(BINDIST_LIBS) \
    $(BINDIST_HI) \
    $(BINDIST_EXTRAS) \
967
    $(includes_H_FILES) \
Ian Lynagh's avatar
Ian Lynagh committed
968 969
    $(includes_DERIVEDCONSTANTS) \
    $(includes_GHCCONSTANTS) \
970
    $(libffi_HEADERS) \
Ian Lynagh's avatar
Ian Lynagh committed
971 972
    $(INSTALL_LIBEXECS) \
    $(INSTALL_LIBEXEC_SCRIPTS) \
973
    $(INSTALL_TOPDIRS) \
Ian Lynagh's avatar
Ian Lynagh committed
974
    $(INSTALL_BINS) \
975
    $(INSTALL_MANPAGES) \
Ian Lynagh's avatar
Ian Lynagh committed
976
    $(INSTALL_DOCS) \
977
    $(INSTALL_LIBRARY_DOCS) \
Ian Lynagh's avatar
Ian Lynagh committed
978
    $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
Ian Lynagh's avatar
Ian Lynagh committed
979 980 981 982
    docs/index.html \
    compiler/stage2/doc \
    $(wildcard libraries/*/dist-install/doc/) \
    $(wildcard libraries/*/*/dist-install/doc/) \
983
    $(filter-out settings,$(INSTALL_LIBS)) \
984
    $(RTS_INSTALL_LIBS) \
985
    $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
Ian Lynagh's avatar
Ian Lynagh committed
986 987 988 989 990
    mk/project.mk \
    mk/install.mk.in \
    bindist.mk \
    libraries/gen_contents_index \
    libraries/prologue.txt \
991 992 993 994
    $(wildcard libraries/dph/LICENSE \
               libraries/dph/ghc-packages \
               libraries/dph/ghc-packages2 \
               libraries/dph/ghc-stage2-package) \
Ian Lynagh's avatar
Ian Lynagh committed
995
 ))
Simon Marlow's avatar
Simon Marlow committed
996
endif
Ian Lynagh's avatar
Ian Lynagh committed
997 998 999
# mk/project.mk gets an absolute path, so we manually include it in
# the bindist with a relative path

Ian Lynagh's avatar
Ian Lynagh committed
1000
BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
Ian Lynagh's avatar
Ian Lynagh committed
1001

Ian Lynagh's avatar
Ian Lynagh committed
1002
unix-binary-dist-prep:
1003
	$(call removeTrees,bindistprep/)
1004
	"$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
1005
	set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh settings.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
Ian Lynagh's avatar
Ian Lynagh committed
1006 1007 1008 1009
	echo "HADDOCK_DOCS       = $(HADDOCK_DOCS)"       >> $(BIN_DIST_MK)
	echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
	echo "BUILD_DOCBOOK_PS   = $(BUILD_DOCBOOK_PS)"   >> $(BIN_DIST_MK)
	echo "BUILD_DOCBOOK_PDF  = $(BUILD_DOCBOOK_PDF)"  >> $(BIN_DIST_MK)
1010
	echo "BUILD_MAN          = $(BUILD_MAN)"          >> $(BIN_DIST_MK)
ian@well-typed.com's avatar
ian@well-typed.com committed
1011
	echo "override ghc-cabal_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal-bindist" >> $(BIN_DIST_MK)
1012
	echo "UseSystemLibFFI    = $(UseSystemLibFFI)"    >> $(BIN_DIST_MK)
Ian Lynagh's avatar
Ian Lynagh committed
1013
	cd $(BIN_DIST_PREP_DIR) && autoreconf
1014
	$(call removeFiles,$(BIN_DIST_PREP_TAR))
Ian Lynagh's avatar
Ian Lynagh committed
1015 1016
# h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
# tree then we want to include the real file, not a symlink to it
1017
	cd bindistprep && "$(TAR_CMD)" hcf - -T ../bindist-list | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1018

Ian Lynagh's avatar
Ian Lynagh committed
1019
windows-binary-dist-prep:
1020
	$(call removeTrees,bindistprep/)
1021
	$(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1022
	cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1023

1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036
# tryTimes tries to run its third argument multiple times, until it
# succeeds. Don't call it directly; call try10Times instead.
# The first and second argument to tryTimes are lists of values.
# The length of the first argument is the number of times we have
# already tried. The length of the second argument is the number more
# times we will try.
tryTimes = $(if $2, \
                { echo 'Try $(words x $1): $3' ; $3 ; } || \
                $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
                )

# Try to run the argument 10 times. If all 10 fail, fail.
try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1037 1038 1039

.PHONY: publish-binary-dist
publish-binary-dist:
1040
	$(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
Ian Lynagh's avatar
Ian Lynagh committed
1041

1042
ifeq "$(mingw32_TARGET_OS)" "1"
1043
DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/doc
1044
else
1045
DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/share/doc/ghc
1046 1047
endif

Ian Lynagh's avatar
Ian Lynagh committed
1048 1049
.PHONY: publish-docs
publish-docs:
1050
	$(call try10Times,$(PublishCp) -r $(DOCDIR_TO_PUBLISH)/* $(PublishLocation)/docs)
Ian Lynagh's avatar
Ian Lynagh committed
1051

Ian Lynagh's avatar
Ian Lynagh committed
1052 1053 1054 1055 1056 1057 1058 1059 1060 1061
# -----------------------------------------------------------------------------
# Source distributions

# Do it like this:
#
#	$ make
#	$ make sdist
#

# A source dist is built from a complete build tree, because we
1062
# require some extra files not contained in a git checkout: the
Ian Lynagh's avatar
Ian Lynagh committed
1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073
# output from Happy and Alex, for example.
#
# The steps performed by 'make dist' are as follows:
#   - create a complete link-tree of the current build tree in /tmp
#   - run 'make distclean' on that tree
#   - remove a bunch of other files that we know shouldn't be in the dist
#   - tar up first the extralibs package, then the main source package

#
# Directory in which we're going to build the src dist
#
1074 1075 1076
SRC_DIST_ROOT      = sdistprep
SRC_DIST_BASE_NAME = ghc-$(ProjectVersion)

1077 1078 1079 1080
SRC_DIST_GHC_NAME                 = ghc-$(ProjectVersion)-src
SRC_DIST_GHC_ROOT                 = $(SRC_DIST_ROOT)/ghc
SRC_DIST_GHC_DIR                  = $(SRC_DIST_GHC_ROOT)/$(SRC_DIST_BASE_NAME)
SRC_DIST_GHC_TARBALL              = $(SRC_DIST_ROOT)/$(SRC_DIST_GHC_NAME).tar.bz2
1081

1082 1083 1084 1085 1086 1087 1088 1089 1090
SRC_DIST_WINDOWS_TARBALLS_NAME    = ghc-$(ProjectVersion)-windows-extra-src
SRC_DIST_WINDOWS_TARBALLS_ROOT    = $(SRC_DIST_ROOT)/windows-tarballs
SRC_DIST_WINDOWS_TARBALLS_DIR     = $(SRC_DIST_WINDOWS_TARBALLS_ROOT)/$(SRC_DIST_BASE_NAME)
SRC_DIST_WINDOWS_TARBALLS_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_WINDOWS_TARBALLS_NAME).tar.bz2

SRC_DIST_TESTSUITE_NAME           = ghc-$(ProjectVersion)-testsuite
SRC_DIST_TESTSUITE_ROOT           = $(SRC_DIST_ROOT)/testsuite-ghc
SRC_DIST_TESTSUITE_DIR            = $(SRC_DIST_TESTSUITE_ROOT)/$(SRC_DIST_BASE_NAME)
SRC_DIST_TESTSUITE_TARBALL        = $(SRC_DIST_ROOT)/$(SRC_DIST_TESTSUITE_NAME).tar.bz2
Ian Lynagh's avatar
Ian Lynagh committed
1091 1092 1093 1094

#
# Files to include in source distributions
#
1095
SRC_DIST_GHC_DIRS = mk rules docs distrib bindisttest libffi includes \
1096
    utils docs rts compiler ghc driver libraries libffi-tarballs
1097 1098 1099
SRC_DIST_GHC_FILES += \
    configure.ac config.guess config.sub configure \
    aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
ian@well-typed.com's avatar
ian@well-typed.com committed
1100
    settings.in VERSION \
1101
    boot packages ghc.mk
Ian Lynagh's avatar
Ian Lynagh committed
1102 1103 1104 1105 1106 1107 1108

VERSION :
	echo $(ProjectVersion) >VERSION

sdist : VERSION

# Use: