1. 04 Aug, 2008 1 commit
  2. 12 Apr, 2008 1 commit
  3. 27 Jan, 2008 1 commit
  4. 04 Sep, 2007 1 commit
  5. 03 Sep, 2007 1 commit
  6. 01 Sep, 2007 1 commit
  7. 11 Oct, 2006 1 commit
  8. 05 Oct, 2006 1 commit
  9. 25 Jul, 2006 1 commit
    • Simon Marlow's avatar
      Generalise Package Support · 61d2625a
      Simon Marlow authored
      This patch pushes through one fundamental change: a module is now
      identified by the pair of its package and module name, whereas
      previously it was identified by its module name alone.  This means
      that now a program can contain multiple modules with the same name, as
      long as they belong to different packages.
      
      This is a language change - the Haskell report says nothing about
      packages, but it is now necessary to understand packages in order to
      understand GHC's module system.  For example, a type T from module M
      in package P is different from a type T from module M in package Q.
      Previously this wasn't an issue because there could only be a single
      module M in the program.
      
      The "module restriction" on combining packages has therefore been
      lifted, and a program can contain multiple versions of the same
      package.
      
      Note that none of the proposed syntax changes have yet been
      implemented, but the architecture is geared towards supporting import
      declarations qualified by package name, and that is probably the next
      step.
      
      It is now necessary to specify the package name when compiling a
      package, using the -package-name flag (which has been un-deprecated).
      Fortunately Cabal still uses -package-name.
      
      Certain packages are "wired in".  Currently the wired-in packages are:
      base, haskell98, template-haskell and rts, and are always referred to
      by these versionless names.  Other packages are referred to with full
      package IDs (eg. "network-1.0").  This is because the compiler needs
      to refer to entities in the wired-in packages, and we didn't want to
      bake the version of these packages into the comiler.  It's conceivable
      that someone might want to upgrade the base package independently of
      GHC.
      
      Internal changes:
      
        - There are two module-related types:
      
              ModuleName      just a FastString, the name of a module
              Module          a pair of a PackageId and ModuleName
      
          A mapping from ModuleName can be a UniqFM, but a mapping from Module
          must be a FiniteMap (we provide it as ModuleEnv).
      
        - The "HomeModules" type that was passed around the compiler is now
          gone, replaced in most cases by the current package name which is
          contained in DynFlags.  We can tell whether a Module comes from the
          current package by comparing its package name against the current
          package.
      
        - While I was here, I changed PrintUnqual to be a little more useful:
          it now returns the ModuleName that the identifier should be qualified
          with according to the current scope, rather than its original
          module.  Also, PrintUnqual tells whether to qualify module names with
          package names (currently unused).
      
      Docs to follow.
      61d2625a
  10. 07 Apr, 2006 1 commit
    • Simon Marlow's avatar
      Reorganisation of the source tree · 0065d5ab
      Simon Marlow authored
      Most of the other users of the fptools build system have migrated to
      Cabal, and with the move to darcs we can now flatten the source tree
      without losing history, so here goes.
      
      The main change is that the ghc/ subdir is gone, and most of what it
      contained is now at the top level.  The build system now makes no
      pretense at being multi-project, it is just the GHC build system.
      
      No doubt this will break many things, and there will be a period of
      instability while we fix the dependencies.  A straightforward build
      should work, but I haven't yet fixed binary/source distributions.
      Changes to the Building Guide will follow, too.
      0065d5ab
  11. 26 Nov, 2004 1 commit
    • simonmar's avatar
      [project @ 2004-11-26 16:19:45 by simonmar] · ef5b4b14
      simonmar authored
      Further integration with the new package story.  GHC now supports
      pretty much everything in the package proposal.
      
        - GHC now works in terms of PackageIds (<pkg>-<version>) rather than
          just package names.  You can still specify package names without
          versions on the command line, as long as the name is unambiguous.
      
        - GHC understands hidden/exposed modules in a package, and will refuse
          to import a hidden module.  Also, the hidden/eposed status of packages
          is taken into account.
      
        - I had to remove the old package syntax from ghc-pkg, backwards
          compatibility isn't really practical.
      
        - All the package.conf.in files have been rewritten in the new syntax,
          and contain a complete list of modules in the package.  I've set all
          the versions to 1.0 for now - please check your package(s) and fix the
          version number & other info appropriately.
      
        - New options:
      
      	-hide-package P    sets the expose flag on package P to False
      	-ignore-package P  unregisters P for this compilation
      
      	For comparison, -package P sets the expose flag on package P
              to True, and also causes P to be linked in eagerly.
      
              -package-name is no longer officially supported.  Unofficially, it's
      	a synonym for -ignore-package, which has more or less the same effect
      	as -package-name used to.
      
      	Note that a package may be hidden and yet still be linked into
      	the program, by virtue of being a dependency of some other package.
      	To completely remove a package from the compiler's internal database,
              use -ignore-package.
      
      	The compiler will complain if any two packages in the
              transitive closure of exposed packages contain the same
              module.
      
      	You *must* use -ignore-package P when compiling modules for
              package P, if package P (or an older version of P) is already
              registered.  The compiler will helpfully complain if you don't.
      	The fptools build system does this.
      
         - Note: the Cabal library won't work yet.  It still thinks GHC uses
           the old package config syntax.
      
      Internal changes/cleanups:
      
         - The ModuleName type has gone away.  Modules are now just (a
           newtype of) FastStrings, and don't contain any package information.
           All the package-related knowledge is in DynFlags, which is passed
           down to where it is needed.
      
         - DynFlags manipulation has been cleaned up somewhat: there are no
           global variables holding DynFlags any more, instead the DynFlags
           are passed around properly.
      
         - There are a few less global variables in GHC.  Lots more are
           scheduled for removal.
      
         - -i is now a dynamic flag, as are all the package-related flags (but
           using them in {-# OPTIONS #-} is Officially Not Recommended).
      
         - make -j now appears to work under fptools/libraries/.  Probably
           wouldn't take much to get it working for a whole build.
      ef5b4b14
  12. 10 Dec, 2003 1 commit
    • simonmar's avatar
      [project @ 2003-12-10 14:15:16 by simonmar] · 55042138
      simonmar authored
      Add accurate source location annotations to HsSyn
      -------------------------------------------------
      
      Every syntactic entity in HsSyn is now annotated with a SrcSpan, which
      details the exact beginning and end points of that entity in the
      original source file.  All honest compilers should do this, and it was
      about time GHC did the right thing.
      
      The most obvious benefit is that we now have much more accurate error
      messages; when running GHC inside emacs for example, the cursor will
      jump to the exact location of an error, not just a line somewhere
      nearby.  We haven't put a huge amount of effort into making sure all
      the error messages are accurate yet, so there could be some tweaking
      still needed, although the majority of messages I've seen have been
      spot-on.
      
      Error messages now contain a column number in addition to the line
      number, eg.
      
         read001.hs:25:10: Variable not in scope: `+#'
      
      To get the full text span info, use the new option -ferror-spans.  eg.
      
         read001.hs:25:10-11: Variable not in scope: `+#'
      
      I'm not sure whether we should do this by default.  Emacs won't
      understand the new error format, for one thing.
      
      In a more elaborate editor setting (eg. Visual Studio), we can arrange
      to actually highlight the subexpression containing an error.  Eventually
      this information will be used so we can find elements in the abstract
      syntax corresponding to text locations, for performing high-level editor
      functions (eg. "tell me the type of this expression I just highlighted").
      
      Performance of the compiler doesn't seem to be adversely affected.
      Parsing is still quicker than in 6.0.1, for example.
      
      Implementation:
      
      This was an excrutiatingly painful change to make: both Simon P.J. and
      myself have been working on it for the last three weeks or so.  The
      basic changes are:
      
       - a new datatype SrcSpan, which represents a beginning and end position
         in a source file.
      
       - To reduce the pain as much as possible, we also defined:
      
            data Located e = L SrcSpan e
      
       - Every datatype in HsSyn has an equivalent Located version.  eg.
      
            type LHsExpr id = Located (HsExpr id)
      
         and pretty much everywhere we used to use HsExpr we now use
         LHsExpr.  Believe me, we thought about this long and hard, and
         all the other options were worse :-)
      
      
      Additional changes/cleanups we made at the same time:
      
        - The abstract syntax for bindings is now less arcane.  MonoBinds
          and HsBinds with their built-in list constructors have gone away,
          replaced by HsBindGroup and HsBind (see HsSyn/HsBinds.lhs).
      
        - The various HsSyn type synonyms have now gone away (eg. RdrNameHsExpr,
          RenamedHsExpr, and TypecheckedHsExpr are now HsExpr RdrName,
          HsExpr Name, and HsExpr Id respectively).
      
        - Utilities over HsSyn are now collected in a new module HsUtils.
          More stuff still needs to be moved in here.
      
        - MachChar now has a real Char instead of an Int.  All GHC versions that
          can compile GHC now support 32-bit Chars, so this was a simplification.
      55042138
  13. 01 Jul, 2003 1 commit
  14. 13 Sep, 2002 1 commit
    • simonpj's avatar
      [project @ 2002-09-13 15:02:25 by simonpj] · 9af77fa4
      simonpj authored
      --------------------------------------
      	Make Template Haskell into the HEAD
      	--------------------------------------
      
      This massive commit transfers to the HEAD all the stuff that
      Simon and Tim have been doing on Template Haskell.  The
      meta-haskell-branch is no more!
      
      WARNING: make sure that you
      
        * Update your links if you are using link trees.
          Some modules have been added, some have gone away.
      
        * Do 'make clean' in all library trees.
          The interface file format has changed, and you can
          get strange panics (sadly) if GHC tries to read old interface files:
          e.g.  ghc-5.05: panic! (the `impossible' happened, GHC version 5.05):
      	  Binary.get(TyClDecl): ForeignType
      
        * You need to recompile the rts too; Linker.c has changed
      
      
      However the libraries are almost unaltered; just a tiny change in
      Base, and to the exports in Prelude.
      
      
      NOTE: so far as TH itself is concerned, expression splices work
      fine, but declaration splices are not complete.
      
      
      		---------------
      		The main change
      		---------------
      
      The main structural change: renaming and typechecking have to be
      interleaved, because we can't rename stuff after a declaration splice
      until after we've typechecked the stuff before (and the splice
      itself).
      
      * Combine the renamer and typecheker monads into one
      	(TcRnMonad, TcRnTypes)
        These two replace TcMonad and RnMonad
      
      * Give them a single 'driver' (TcRnDriver).  This driver
        replaces TcModule.lhs and Rename.lhs
      
      * The haskell-src library package has a module
      	Language/Haskell/THSyntax
        which defines the Haskell data type seen by the TH programmer.
      
      * New modules:
      	hsSyn/Convert.hs 	converts THSyntax -> HsSyn
      	deSugar/DsMeta.hs 	converts HsSyn -> THSyntax
      
      * New module typecheck/TcSplice type-checks Template Haskell splices.
      
      		-------------
      		Linking stuff
      		-------------
      
      * ByteCodeLink has been split into
      	ByteCodeLink	(which links)
      	ByteCodeAsm	(which assembles)
      
      * New module ghci/ObjLink is the object-code linker.
      
      * compMan/CmLink is removed entirely (was out of place)
        Ditto CmTypes (which was tiny)
      
      * Linker.c initialises the linker when it is first used (no need to call
        initLinker any more).  Template Haskell makes it harder to know when
        and whether to initialise the linker.
      
      
      	-------------------------------------
      	Gathering the LIE in the type checker
      	-------------------------------------
      
      * Instead of explicitly gathering constraints in the LIE
      	tcExpr :: RenamedExpr -> TcM (TypecheckedExpr, LIE)
        we now dump the constraints into a mutable varabiable carried
        by the monad, so we get
      	tcExpr :: RenamedExpr -> TcM TypecheckedExpr
      
        Much less clutter in the code, and more efficient too.
        (Originally suggested by Mark Shields.)
      
      
      		-----------------
      		Remove "SysNames"
      		-----------------
      
      Because the renamer and the type checker were entirely separate,
      we had to carry some rather tiresome implicit binders (or "SysNames")
      along inside some of the HsDecl data structures.  They were both
      tiresome and fragile.
      
      Now that the typechecker and renamer are more intimately coupled,
      we can eliminate SysNames (well, mostly... default methods still
      carry something similar).
      
      		-------------
      		Clean up HsPat
      		-------------
      
      One big clean up is this: instead of having two HsPat types (InPat and
      OutPat), they are now combined into one.  This is more consistent with
      the way that HsExpr etc is handled; there are some 'Out' constructors
      for the type checker output.
      
      So:
      	HsPat.InPat	--> HsPat.Pat
      	HsPat.OutPat	--> HsPat.Pat
      	No 'pat' type parameter in HsExpr, HsBinds, etc
      
      	Constructor patterns are nicer now: they use
      		HsPat.HsConDetails
      	for the three cases of constructor patterns:
      		prefix, infix, and record-bindings
      
      	The *same* data type HsConDetails is used in the type
      	declaration of the data type (HsDecls.TyData)
      
      Lots of associated clean-up operations here and there.  Less code.
      Everything is wonderful.
      9af77fa4
  15. 29 Apr, 2002 1 commit
    • simonmar's avatar
      [project @ 2002-04-29 14:03:38 by simonmar] · b085ee40
      simonmar authored
      FastString cleanup, stage 1.
      
      The FastString type is no longer a mixture of hashed strings and
      literal strings, it contains hashed strings only with O(1) comparison
      (except for UnicodeStr, but that will also go away in due course).  To
      create a literal instance of FastString, use FSLIT("..").
      
      By far the most common use of the old literal version of FastString
      was in the pattern
      
      	  ptext SLIT("...")
      
      this combination still works, although it doesn't go via FastString
      any more.  The next stage will be to remove the need to use this
      special combination at all, using a RULE.
      
      To convert a FastString into an SDoc, now use 'ftext' instead of
      'ptext'.
      
      I've also removed all the FAST_STRING related macros from HsVersions.h
      except for SLIT and FSLIT, just use the relevant functions from
      FastString instead.
      b085ee40
  16. 27 Mar, 2001 1 commit
  17. 30 Oct, 2000 1 commit
  18. 12 Oct, 2000 1 commit
  19. 25 May, 2000 1 commit
    • simonpj's avatar
      [project @ 2000-05-25 12:41:14 by simonpj] · 495ef8bd
      simonpj authored
      ~~~~~~~~~~~~
      		Apr/May 2000
      		~~~~~~~~~~~~
      
      This is a pretty big commit!  It adds stuff I've been working on
      over the last month or so.  DO NOT MERGE IT WITH 4.07!
      
      Interface file formats have changed a little; you'll need
      to make clean before remaking.
      
      						Simon PJ
      
      Recompilation checking
      ~~~~~~~~~~~~~~~~~~~~~~
      Substantial improvement in recompilation checking.  The version management
      is now entirely internal to GHC.  ghc-iface.lprl is dead!
      
      The trick is to generate the new interface file in two steps:
        - first convert Types etc to HsTypes etc, and thereby
      	build a new ParsedIface
        - then compare against the parsed (but not renamed) version of the old
      	interface file
      Doing this meant adding code to convert *to* HsSyn things, and to
      compare HsSyn things for equality.  That is the main tedious bit.
      
      Another improvement is that we now track version info for
      fixities and rules, which was missing before.
      
      
      Interface file reading
      ~~~~~~~~~~~~~~~~~~~~~~
      Make interface files reading more robust.
        * If the old interface file is unreadable, don't fail. [bug fix]
      
        * If the old interface file mentions interfaces
          that are unreadable, don't fail. [bug fix]
      
        * When we can't find the interface file,
          print the directories we are looking in.  [feature]
      
      
      Type signatures
      ~~~~~~~~~~~~~~~
        * New flag -ddump-types to print type signatures
      
      
      Type pruning
      ~~~~~~~~~~~~
      When importing
      	data T = T1 A | T2 B | T3 C
      it seems excessive to import the types A, B, C as well, unless
      the constructors T1, T2 etc are used.  A,B,C might be more types,
      and importing them may mean reading more interfaces, and so on.
       So the idea is that the renamer will just import the decl
      	data T
      unless one of the constructors is used.  This turns out to be quite
      easy to implement.  The downside is that we must make sure the
      constructors are always available if they are really needed, so
      I regard this as an experimental feature.
      
      
      Elimininate ThinAir names
      ~~~~~~~~~~~~~~~~~~~~~~~~~
      Eliminate ThinAir.lhs and all its works.  It was always a hack, and now
      the desugarer carries around an environment I think we can nuke ThinAir
      altogether.
      
      As part of this, I had to move all the Prelude RdrName defns from PrelInfo
      to PrelMods --- so I renamed PrelMods as PrelNames.
      
      I also had to move the builtinRules so that they are injected by the renamer
      (rather than appearing out of the blue in SimplCore).  This is if anything simpler.
      
      Miscellaneous
      ~~~~~~~~~~~~~
      * Tidy up the data types involved in Rules
      
      * Eliminate RnEnv.better_provenance; use Name.hasBetterProv instead
      
      * Add Unique.hasKey :: Uniquable a => a -> Unique -> Bool
        It's useful in a lot of places
      
      * Fix a bug in interface file parsing for __U[!]
      495ef8bd
  20. 18 May, 1999 1 commit
  21. 02 Mar, 1999 1 commit
  22. 27 Jan, 1999 1 commit
    • simonpj's avatar
      [project @ 1999-01-27 14:51:14 by simonpj] · 18976e61
      simonpj authored
      Finally!  This commits the ongoing saga of Simon's hygiene sweep
      
      FUNCTIONALITY
      ~~~~~~~~~~~~~
      a) The 'unused variable' warnings from the renamer work.  
      b) Better error messages here and there, esp type checker
      c) Fixities for Haskell 98 (maybe I'd done that before)
      d) Lazy reporting of name clashes for Haskell 98 (ditto)
      
      HYGIENE
      ~~~~~~~
      a) type OccName has its own module.  OccNames are represented
         by a single FastString, not three as in the last round.  This
         string is held in Z-encoded form; a decoding function decodes
         for printing in user error messages.  There's a nice tight
         encoding for (,,,,,,,,,,,,,,,,,,,,,,,,,,,,,)
      
      b) type Module is a proper ADT, in module OccName
      
      c) type RdrName is a proper ADT, in its own module
      
      d) type Name has a new, somwhat tidier, representation
      
      e) much grunting in the renamer to get Provenances right.
         This makes error messages look better (no spurious qualifiers)
      18976e61
  23. 18 Dec, 1998 1 commit
    • simonpj's avatar
      [project @ 1998-12-18 17:40:31 by simonpj] · 7e602b0a
      simonpj authored
      Another big commit from Simon.  Actually, the last one
      didn't all go into the main trunk; because of a CVS glitch it
      ended up in the wrong branch.
      
      So this commit includes:
      
      * Scoped type variables
      * Warnings for unused variables should work now (they didn't before)
      * Simplifier improvements:
      	- Much better treatment of strict arguments
      	- Better treatment of bottoming Ids
      	- No need for w/w split for fns that are merely strict
      	- Fewer iterations needed, I hope
      * Less gratuitous renaming in interface files and abs C
      * OccName is a separate module, and is an abstract data type
      
      I think the whole Prelude and Exts libraries compile correctly.
      Something isn't quite right about typechecking existentials though.
      7e602b0a
  24. 02 Dec, 1998 1 commit
  25. 08 Jan, 1998 1 commit
    • simonm's avatar
      [project @ 1998-01-08 18:03:08 by simonm] · 9dd6e1c2
      simonm authored
      The Great Multi-Parameter Type Classes Merge.
      
      Notes from Simon (abridged):
      
      * Multi-parameter type classes are fully implemented.
      * Error messages from the type checker should be noticeably improved
      * Warnings for unused bindings (-fwarn-unused-names)
      * many other minor bug fixes.
      
      Internally there are the following changes
      
      * Removal of Haskell 1.2 compatibility.
      * Dramatic clean-up of the PprStyle stuff.
      * The type Type has been substantially changed.
      * The dictionary for each class is represented by a new
        data type for that purpose, rather than by a tuple.
      9dd6e1c2
  26. 05 Jul, 1997 1 commit
  27. 05 Jun, 1997 1 commit
  28. 26 May, 1997 1 commit
  29. 19 May, 1997 1 commit
  30. 19 Dec, 1996 1 commit
  31. 05 Jun, 1996 1 commit
  32. 20 Apr, 1996 1 commit
  33. 07 Apr, 1996 1 commit
  34. 19 Mar, 1996 1 commit