DriverPipeline.hs

-----------------------------------------------------------------------------
--
-- GHC Driver
--
-- (c) The University of Glasgow 2005
--
-----------------------------------------------------------------------------

{-# OPTIONS -w #-}
-- The above warning supression flag is a temporary kludge.
-- While working on this module you are encouraged to remove it and fix
-- any warnings in the module. See
--     http://hackage.haskell.org/trac/ghc/wiki/Commentary/CodingStyle#Warnings
-- for details

module DriverPipeline (
	-- Run a series of compilation steps in a pipeline, for a
	-- collection of source files.
   oneShot, compileFile,

	-- Interfaces for the batch-mode driver
   linkBinary,

	-- Interfaces for the compilation manager (interpreted/batch-mode)
   preprocess, 
   compile, CompResult(..), 
   link, 

  ) where

#include "HsVersions.h"

import Packages
import HeaderInfo
import DriverPhases
import SysTools
import HscMain
import Finder
import HscTypes
import Outputable
import Module
import UniqFM		( eltsUFM )
import ErrUtils
import DynFlags
import StaticFlags	( v_Ld_inputs, opt_Static, opt_HardwireLibPaths, WayName(..) )
import Config
import Panic
import Util
import StringBuffer	( hGetStringBuffer )
import BasicTypes	( SuccessFlag(..) )
import Maybes		( expectJust )
import ParserCoreUtils	( getCoreModuleName )
import SrcLoc		( unLoc )
import SrcLoc		( Located(..) )

import Control.Exception as Exception
import Data.IORef	( readIORef, writeIORef, IORef )
import GHC.Exts		( Int(..) )
import System.Directory
import System.IO
import SYSTEM_IO_ERROR as IO
import Control.Monad
import Data.List	( isSuffixOf )
import Data.Maybe
import System.Exit
import System.Environment

-- ---------------------------------------------------------------------------
-- Pre-process

-- Just preprocess a file, put the result in a temp. file (used by the
-- compilation manager during the summary phase).
--
-- We return the augmented DynFlags, because they contain the result
-- of slurping in the OPTIONS pragmas

preprocess :: DynFlags -> (FilePath, Maybe Phase) -> IO (DynFlags, FilePath)
preprocess dflags (filename, mb_phase) =
  ASSERT2(isJust mb_phase || isHaskellSrcFilename filename, text filename) 
  runPipeline anyHsc dflags (filename, mb_phase) 
        Nothing Temporary Nothing{-no ModLocation-}

-- ---------------------------------------------------------------------------
-- Compile

-- Compile a single module, under the control of the compilation manager.
--
-- This is the interface between the compilation manager and the
-- compiler proper (hsc), where we deal with tedious details like
-- reading the OPTIONS pragma from the source file, and passing the
-- output of hsc through the C compiler.

-- NB.  No old interface can also mean that the source has changed.

compile :: HscEnv
	-> ModSummary
	-> Maybe Linkable	-- Just linkable <=> source unchanged
        -> Maybe ModIface       -- Old interface, if available
        -> Int -> Int
        -> IO CompResult

data CompResult
   = CompOK   ModDetails 	-- New details
              ModIface		-- New iface
              (Maybe Linkable)	-- a Maybe, for the same reasons as hm_linkable

   | CompErrs 


compile hsc_env mod_summary maybe_old_linkable old_iface mod_index nmods = do 

   let dflags0     = ms_hspp_opts mod_summary
       this_mod    = ms_mod mod_summary
       src_flavour = ms_hsc_src mod_summary

       have_object 
	       | Just l <- maybe_old_linkable, isObjectLinkable l = True
	       | otherwise = False

   -- FIXME: We need to know whether or not we're recompiling the file. Move this to HscMain?
   --showPass dflags0 ("Compiling " ++ showModMsg have_object mod_summary)

   let location	  = ms_location mod_summary
   let input_fn   = expectJust "compile:hs" (ml_hs_file location) 
   let input_fnpp = ms_hspp_file mod_summary

   debugTraceMsg dflags0 2 (text "compile: input file" <+> text input_fnpp)

   let (basename, _) = splitFilename input_fn

  -- We add the directory in which the .hs files resides) to the import path.
  -- This is needed when we try to compile the .hc file later, if it
  -- imports a _stub.h file that we created here.
   let current_dir = directoryOf basename
       old_paths   = includePaths dflags0
       dflags      = dflags0 { includePaths = current_dir : old_paths }

   -- Figure out what lang we're generating
   let hsc_lang = hscMaybeAdjustTarget dflags StopLn src_flavour (hscTarget dflags)
   -- ... and what the next phase should be
   let next_phase = hscNextPhase dflags src_flavour hsc_lang
   -- ... and what file to generate the output into
   output_fn <- getOutputFilename next_phase 
			Temporary basename dflags next_phase (Just location)

   let dflags' = dflags { hscTarget = hsc_lang,
				hscOutName = output_fn,
				extCoreName = basename ++ ".hcr" }

   -- -no-recomp should also work with --make
   let force_recomp = dopt Opt_ForceRecomp dflags
       source_unchanged = isJust maybe_old_linkable && not force_recomp
       hsc_env' = hsc_env { hsc_dflags = dflags' }
       object_filename = ml_obj_file location

   let getStubLinkable False = return []
       getStubLinkable True
           = do stub_o <- compileStub dflags' this_mod location
                return [ DotO stub_o ]

       handleBatch (HscNoRecomp, iface, details)
           = ASSERT (isJust maybe_old_linkable)
             return (CompOK details iface maybe_old_linkable)
       handleBatch (HscRecomp hasStub, iface, details)
           | isHsBoot src_flavour
               = do when (isObjectTarget hsc_lang) $ -- interpreted reaches here too
                       SysTools.touch dflags' "Touching object file"
                                   object_filename
                    return (CompOK details iface Nothing)
           | otherwise
               = do stub_unlinked <- getStubLinkable hasStub
                    (hs_unlinked, unlinked_time) <-
                        case hsc_lang of
                          HscNothing
                            -> return ([], ms_hs_date mod_summary)
                          -- We're in --make mode: finish the compilation pipeline.
                          _other
                            -> do runPipeline StopLn dflags (output_fn,Nothing)
                                              (Just basename)
                                              Persistent
                                              (Just location)
                                  -- The object filename comes from the ModLocation
                                  o_time <- getModificationTime object_filename
                                  return ([DotO object_filename], o_time)
                    let linkable = LM unlinked_time this_mod
			           (hs_unlinked ++ stub_unlinked)
                    return (CompOK details iface (Just linkable))

       handleInterpreted (InteractiveNoRecomp, iface, details)
           = ASSERT (isJust maybe_old_linkable)
             return (CompOK details iface maybe_old_linkable)
       handleInterpreted (InteractiveRecomp hasStub comp_bc, iface, details)
           = do stub_unlinked <- getStubLinkable hasStub
                let hs_unlinked = [BCOs comp_bc]
                    unlinked_time = ms_hs_date mod_summary
                  -- Why do we use the timestamp of the source file here,
                  -- rather than the current time?  This works better in
                  -- the case where the local clock is out of sync
                  -- with the filesystem's clock.  It's just as accurate:
                  -- if the source is modified, then the linkable will
                  -- be out of date.
                let linkable = LM unlinked_time this_mod
                               (hs_unlinked ++ stub_unlinked)
                return (CompOK details iface (Just linkable))

   let runCompiler compiler handle
           = do mbResult <- compiler hsc_env' mod_summary
                                     source_unchanged old_iface
                                     (Just (mod_index, nmods))
                case mbResult of
                  Nothing     -> return CompErrs
                  Just result -> handle result
   -- run the compiler
   case hsc_lang of
     HscInterpreted
      | isHsBoot src_flavour -> runCompiler hscCompileNothing handleBatch
      | otherwise            -> runCompiler hscCompileInteractive handleInterpreted
     HscNothing     -> runCompiler hscCompileNothing handleBatch
     _other         -> runCompiler hscCompileBatch handleBatch

-----------------------------------------------------------------------------
-- stub .h and .c files (for foreign export support)

-- The _stub.c file is derived from the haskell source file, possibly taking
-- into account the -stubdir option.
--
-- Consequently, we derive the _stub.o filename from the haskell object
-- filename.  
--
-- This isn't necessarily the same as the object filename we
-- would get if we just compiled the _stub.c file using the pipeline.
-- For example:
--
--    ghc src/A.hs -odir obj
-- 
-- results in obj/A.o, and src/A_stub.c.  If we compile src/A_stub.c with
-- -odir obj, we would get obj/src/A_stub.o, which is wrong; we want
-- obj/A_stub.o.

compileStub :: DynFlags -> Module -> ModLocation -> IO FilePath
compileStub dflags mod location = do
	let (o_base, o_ext) = splitFilename (ml_obj_file location)
	    stub_o = o_base ++ "_stub" `joinFileExt` o_ext

	-- compile the _stub.c file w/ gcc
	let (stub_c,_) = mkStubPaths dflags (moduleName mod) location
	runPipeline StopLn dflags (stub_c,Nothing)  Nothing
		(SpecificFile stub_o) Nothing{-no ModLocation-}

	return stub_o


-- ---------------------------------------------------------------------------
-- Link

link :: GhcLink			-- interactive or batch
     -> DynFlags		-- dynamic flags
     -> Bool			-- attempt linking in batch mode?
     -> HomePackageTable	-- what to link
     -> IO SuccessFlag

-- For the moment, in the batch linker, we don't bother to tell doLink
-- which packages to link -- it just tries all that are available.
-- batch_attempt_linking should only be *looked at* in batch mode.  It
-- should only be True if the upsweep was successful and someone
-- exports main, i.e., we have good reason to believe that linking
-- will succeed.

#ifdef GHCI
link LinkInMemory dflags batch_attempt_linking hpt
    = do -- Not Linking...(demand linker will do the job)
	 return Succeeded
#endif

link NoLink dflags batch_attempt_linking hpt
   = return Succeeded

link LinkBinary dflags batch_attempt_linking hpt
   | batch_attempt_linking
   = do 
	let 
	    home_mod_infos = eltsUFM hpt

	    -- the packages we depend on
	    pkg_deps  = concatMap (dep_pkgs . mi_deps . hm_iface) home_mod_infos

	    -- the linkables to link
	    linkables = map (expectJust "link".hm_linkable) home_mod_infos

        debugTraceMsg dflags 3 (text "link: linkables are ..." $$ vcat (map ppr linkables))

	-- check for the -no-link flag
	if isNoLink (ghcLink dflags)
	  then do debugTraceMsg dflags 3 (text "link(batch): linking omitted (-c flag given).")
	          return Succeeded
	  else do

	let getOfiles (LM _ _ us) = map nameOfObject (filter isObject us)
	    obj_files = concatMap getOfiles linkables

	    exe_file = exeFileName dflags

	-- if the modification time on the executable is later than the
	-- modification times on all of the objects, then omit linking
	-- (unless the -no-recomp flag was given).
	e_exe_time <- IO.try $ getModificationTime exe_file
	let linking_needed 
		| Left _  <- e_exe_time = True
		| Right t <- e_exe_time = 
			any (t <) (map linkableTime linkables)

	if not (dopt Opt_ForceRecomp dflags) && not linking_needed
	   then do debugTraceMsg dflags 2 (text exe_file <+> ptext SLIT("is up to date, linking not required."))
		   return Succeeded
	   else do

	debugTraceMsg dflags 1 (ptext SLIT("Linking") <+> text exe_file
				 <+> text "...")

	-- Don't showPass in Batch mode; doLink will do that for us.
	let link = case ghcLink dflags of
	        LinkBinary  -> linkBinary
	        LinkDynLib  -> linkDynLib
	link dflags obj_files pkg_deps

        debugTraceMsg dflags 3 (text "link: done")

	-- linkBinary only returns if it succeeds
        return Succeeded

   | otherwise
   = do debugTraceMsg dflags 3 (text "link(batch): upsweep (partially) failed OR" $$
                                text "   Main.main not exported; not linking.")
        return Succeeded
      
-- -----------------------------------------------------------------------------
-- Compile files in one-shot mode.

oneShot :: DynFlags -> Phase -> [(String, Maybe Phase)] -> IO ()
oneShot dflags stop_phase srcs = do
  o_files <- mapM (compileFile dflags stop_phase) srcs
  doLink dflags stop_phase o_files

compileFile :: DynFlags -> Phase -> (FilePath, Maybe Phase) -> IO FilePath
compileFile dflags stop_phase (src, mb_phase) = do
   exists <- doesFileExist src
   when (not exists) $ 
   	throwDyn (CmdLineError ("does not exist: " ++ src))
   
   let
	split     = dopt Opt_SplitObjs dflags
	mb_o_file = outputFile dflags
	ghc_link  = ghcLink dflags	-- Set by -c or -no-link

	-- When linking, the -o argument refers to the linker's output.	
	-- otherwise, we use it as the name for the pipeline's output.
        output
	 | StopLn <- stop_phase, not (isNoLink ghc_link) = Persistent
		-- -o foo applies to linker
	 | Just o_file <- mb_o_file = SpecificFile o_file
		-- -o foo applies to the file we are compiling now
	 | otherwise = Persistent

        stop_phase' = case stop_phase of 
			As | split -> SplitAs
			other      -> stop_phase

   (_, out_file) <- runPipeline stop_phase' dflags
			  (src, mb_phase) Nothing output 
                          Nothing{-no ModLocation-}
   return out_file


doLink :: DynFlags -> Phase -> [FilePath] -> IO ()
doLink dflags stop_phase o_files
  | not (isStopLn stop_phase)
  = return ()		-- We stopped before the linking phase

  | otherwise
  = case ghcLink dflags of
	NoLink     -> return ()
	LinkBinary -> linkBinary dflags o_files link_pkgs
	LinkDynLib -> linkDynLib dflags o_files []
  where
   -- Always link in the haskell98 package for static linking.  Other
   -- packages have to be specified via the -package flag.
    link_pkgs = [haskell98PackageId]


-- ---------------------------------------------------------------------------
-- Run a compilation pipeline, consisting of multiple phases.

-- This is the interface to the compilation pipeline, which runs
-- a series of compilation steps on a single source file, specifying
-- at which stage to stop.

-- The DynFlags can be modified by phases in the pipeline (eg. by
-- GHC_OPTIONS pragmas), and the changes affect later phases in the
-- pipeline.

data PipelineOutput 
  = Temporary
	-- output should be to a temporary file: we're going to
	-- run more compilation steps on this output later
  | Persistent
	-- we want a persistent file, i.e. a file in the current directory
	-- derived from the input filename, but with the appropriate extension.
	-- eg. in "ghc -c Foo.hs" the output goes into ./Foo.o.
  | SpecificFile FilePath
	-- the output must go into the specified file.

runPipeline
  :: Phase		        -- When to stop
  -> DynFlags		        -- Dynamic flags
  -> (FilePath,Maybe Phase)     -- Input filename (and maybe -x suffix)
  -> Maybe FilePath             -- original basename (if different from ^^^)
  -> PipelineOutput	        -- Output filename
  -> Maybe ModLocation          -- A ModLocation, if this is a Haskell module
  -> IO (DynFlags, FilePath)	-- (final flags, output filename)

runPipeline stop_phase dflags0 (input_fn, mb_phase) mb_basename output maybe_loc
  = do
  let
      (input_basename, suffix) = splitFilename input_fn
      basename | Just b <- mb_basename = b
               | otherwise             = input_basename

      -- Decide where dump files should go based on the pipeline output
      dflags = dflags0 { dumpPrefix = Just (basename ++ ".") }

	-- If we were given a -x flag, then use that phase to start from
      start_phase = fromMaybe (startPhase suffix) mb_phase

  -- We want to catch cases of "you can't get there from here" before
  -- we start the pipeline, because otherwise it will just run off the
  -- end.
  --
  -- There is a partial ordering on phases, where A < B iff A occurs
  -- before B in a normal compilation pipeline.

  when (not (start_phase `happensBefore` stop_phase)) $
	throwDyn (UsageError 
		    ("cannot compile this file to desired target: "
		       ++ input_fn))

  -- this is a function which will be used to calculate output file names
  -- as we go along (we partially apply it to some of its inputs here)
  let get_output_fn = getOutputFilename stop_phase output basename

  -- Execute the pipeline...
  (dflags', output_fn, maybe_loc) <- 
	pipeLoop dflags start_phase stop_phase input_fn 
	  	 basename suffix get_output_fn maybe_loc

  -- Sometimes, a compilation phase doesn't actually generate any output
  -- (eg. the CPP phase when -fcpp is not turned on).  If we end on this
  -- stage, but we wanted to keep the output, then we have to explicitly
  -- copy the file, remembering to prepend a {-# LINE #-} pragma so that
  -- further compilation stages can tell what the original filename was.
  case output of
    Temporary -> 
	return (dflags', output_fn)
    _other ->
	do final_fn <- get_output_fn dflags' stop_phase maybe_loc
	   when (final_fn /= output_fn) $ do
              let msg = ("Copying `" ++ output_fn ++"' to `" ++ final_fn ++ "'")
                  line_prag = Just ("{-# LINE 1 \"" ++ input_fn ++ "\" #-}\n")
	      copyWithHeader dflags msg line_prag output_fn final_fn
	   return (dflags', final_fn)



pipeLoop :: DynFlags -> Phase -> Phase 
	 -> FilePath  -> String -> Suffix
	 -> (DynFlags -> Phase -> Maybe ModLocation -> IO FilePath)
	 -> Maybe ModLocation
	 -> IO (DynFlags, FilePath, Maybe ModLocation)

pipeLoop dflags phase stop_phase 
	 input_fn orig_basename orig_suff 
	 orig_get_output_fn maybe_loc

  | phase `eqPhase` stop_phase		  -- All done
  = return (dflags, input_fn, maybe_loc)

  | not (phase `happensBefore` stop_phase)
	-- Something has gone wrong.  We'll try to cover all the cases when
	-- this could happen, so if we reach here it is a panic.
	-- eg. it might happen if the -C flag is used on a source file that
	-- has {-# OPTIONS -fasm #-}.
  = panic ("pipeLoop: at phase " ++ show phase ++ 
	   " but I wanted to stop at phase " ++ show stop_phase)

  | otherwise 
  = do	{ (next_phase, dflags', maybe_loc, output_fn)
		<- runPhase phase stop_phase dflags orig_basename 
			    orig_suff input_fn orig_get_output_fn maybe_loc
	; pipeLoop dflags' next_phase stop_phase output_fn
		   orig_basename orig_suff orig_get_output_fn maybe_loc }

getOutputFilename
  :: Phase -> PipelineOutput -> String
  -> DynFlags -> Phase{-next phase-} -> Maybe ModLocation -> IO FilePath
getOutputFilename stop_phase output basename
 = func
 where
	func dflags next_phase maybe_location
	   | is_last_phase, Persistent <- output     = persistent_fn
	   | is_last_phase, SpecificFile f <- output = return f
	   | keep_this_output	   		     = persistent_fn
     	   | otherwise        	   		     = newTempName dflags suffix
	   where
		hcsuf      = hcSuf dflags
		odir       = objectDir dflags
		osuf       = objectSuf dflags
		keep_hc    = dopt Opt_KeepHcFiles dflags
		keep_raw_s = dopt Opt_KeepRawSFiles dflags
		keep_s     = dopt Opt_KeepSFiles dflags

		myPhaseInputExt HCc    = hcsuf
		myPhaseInputExt StopLn = osuf
		myPhaseInputExt other  = phaseInputExt other

		is_last_phase = next_phase `eqPhase` stop_phase

		-- sometimes, we keep output from intermediate stages
		keep_this_output = 
     		     case next_phase of
     			     StopLn              -> True
     			     Mangle | keep_raw_s -> True
     			     As     | keep_s     -> True
     			     HCc    | keep_hc    -> True
     			     _other              -> False

		suffix = myPhaseInputExt next_phase

		-- persistent object files get put in odir
	        persistent_fn 
		   | StopLn <- next_phase = return odir_persistent
		   | otherwise            = return persistent

		persistent = basename `joinFileExt` suffix

		odir_persistent
		   | Just loc <- maybe_location = ml_obj_file loc
		   | Just d <- odir = d `joinFileName` persistent
		   | otherwise      = persistent


-- -----------------------------------------------------------------------------
-- Each phase in the pipeline returns the next phase to execute, and the
-- name of the file in which the output was placed.
--
-- We must do things dynamically this way, because we often don't know
-- what the rest of the phases will be until part-way through the
-- compilation: for example, an {-# OPTIONS -fasm #-} at the beginning
-- of a source file can change the latter stages of the pipeline from
-- taking the via-C route to using the native code generator.

runPhase :: Phase	-- Do this phase first
	 -> Phase	-- Stop just before this phase
	 -> DynFlags
	 -> String	-- basename of original input source
	 -> String	-- its extension
	 -> FilePath	-- name of file which contains the input to this phase.
	 -> (DynFlags -> Phase -> Maybe ModLocation -> IO FilePath)
			-- how to calculate the output filename
	 -> Maybe ModLocation		-- the ModLocation, if we have one
	 -> IO (Phase,	  		-- next phase
		DynFlags,		-- new dynamic flags
		Maybe ModLocation,	-- the ModLocation, if we have one
		FilePath)		-- output filename

	-- Invariant: the output filename always contains the output
	-- Interesting case: Hsc when there is no recompilation to do
	--		     Then the output filename is still a .o file 

-------------------------------------------------------------------------------
-- Unlit phase 

runPhase (Unlit sf) _stop dflags _basename _suff input_fn get_output_fn maybe_loc
  = do let unlit_flags = getOpts dflags opt_L
       -- The -h option passes the file name for unlit to put in a #line directive
       output_fn <- get_output_fn dflags (Cpp sf) maybe_loc

       SysTools.runUnlit dflags 
		(map SysTools.Option unlit_flags ++
       			  [ SysTools.Option     "-h"
 			  , SysTools.Option     input_fn
			  , SysTools.FileOption "" input_fn
			  , SysTools.FileOption "" output_fn
			  ])

       return (Cpp sf, dflags, maybe_loc, output_fn)

-------------------------------------------------------------------------------
-- Cpp phase : (a) gets OPTIONS out of file
--	       (b) runs cpp if necessary

runPhase (Cpp sf) _stop dflags0 basename suff input_fn get_output_fn maybe_loc
  = do src_opts <- getOptionsFromFile input_fn
       (dflags,unhandled_flags) <- parseDynamicFlags dflags0 (map unLoc src_opts)
       checkProcessArgsResult unhandled_flags (basename `joinFileExt` suff)

       if not (dopt Opt_Cpp dflags) then
           -- no need to preprocess CPP, just pass input file along
	   -- to the next phase of the pipeline.
          return (HsPp sf, dflags, maybe_loc, input_fn)
	else do
	    output_fn <- get_output_fn dflags (HsPp sf) maybe_loc
	    doCpp dflags True{-raw-} False{-no CC opts-} input_fn output_fn
	    return (HsPp sf, dflags, maybe_loc, output_fn)

-------------------------------------------------------------------------------
-- HsPp phase 

runPhase (HsPp sf) _stop dflags basename suff input_fn get_output_fn maybe_loc
  = do if not (dopt Opt_Pp dflags) then
           -- no need to preprocess, just pass input file along
	   -- to the next phase of the pipeline.
          return (Hsc sf, dflags, maybe_loc, input_fn)
	else do
	    let hspp_opts = getOpts dflags opt_F
	    let orig_fn = basename `joinFileExt` suff
	    output_fn <- get_output_fn dflags (Hsc sf) maybe_loc
	    SysTools.runPp dflags
			   ( [ SysTools.Option     orig_fn
			     , SysTools.Option     input_fn
			     , SysTools.FileOption "" output_fn
			     ] ++
			     map SysTools.Option hspp_opts
			   )
	    return (Hsc sf, dflags, maybe_loc, output_fn)

-----------------------------------------------------------------------------
-- Hsc phase

-- Compilation of a single module, in "legacy" mode (_not_ under
-- the direction of the compilation manager).
runPhase (Hsc src_flavour) stop dflags0 basename suff input_fn get_output_fn _maybe_loc 
 = do	-- normal Hsc mode, not mkdependHS

  -- we add the current directory (i.e. the directory in which
  -- the .hs files resides) to the import path, since this is
  -- what gcc does, and it's probably what you want.
	let current_dir = directoryOf basename
	
	    paths = includePaths dflags0
	    dflags = dflags0 { includePaths = current_dir : paths }
	
  -- gather the imports and module name
        (hspp_buf,mod_name,imps,src_imps) <- 
            case src_flavour of
		ExtCoreFile -> do {  -- no explicit imports in ExtCore input.
			          ; m <- getCoreModuleName input_fn
			          ; return (Nothing, mkModuleName m, [], []) }

		other -> do { buf <- hGetStringBuffer input_fn
			    ; (src_imps,imps,L _ mod_name) <- getImports dflags buf input_fn
			    ; return (Just buf, mod_name, imps, src_imps) }

  -- Build a ModLocation to pass to hscMain.
  -- The source filename is rather irrelevant by now, but it's used
  -- by hscMain for messages.  hscMain also needs 
  -- the .hi and .o filenames, and this is as good a way
  -- as any to generate them, and better than most. (e.g. takes 
  -- into accout the -osuf flags)
	location1 <- mkHomeModLocation2 dflags mod_name basename suff

  -- Boot-ify it if necessary
	let location2 | isHsBoot src_flavour = addBootSuffixLocn location1
		      | otherwise	     = location1 
					

  -- Take -ohi into account if present
  -- This can't be done in mkHomeModuleLocation because
  -- it only applies to the module being compiles
	let ohi = outputHi dflags
	    location3 | Just fn <- ohi = location2{ ml_hi_file = fn }
		      | otherwise      = location2

  -- Take -o into account if present
  -- Very like -ohi, but we must *only* do this if we aren't linking
  -- (If we're linking then the -o applies to the linked thing, not to
  -- the object file for one module.)
  -- Note the nasty duplication with the same computation in compileFile above
	let expl_o_file = outputFile dflags
	    location4 | Just ofile <- expl_o_file
		      , isNoLink (ghcLink dflags)
		      = location3 { ml_obj_file = ofile }
		      | otherwise = location3

	    o_file = ml_obj_file location4 	-- The real object file


  -- Figure out if the source has changed, for recompilation avoidance.
  --
  -- Setting source_unchanged to True means that M.o seems
  -- to be up to date wrt M.hs; so no need to recompile unless imports have
  -- changed (which the compiler itself figures out).
  -- Setting source_unchanged to False tells the compiler that M.o is out of
  -- date wrt M.hs (or M.o doesn't exist) so we must recompile regardless.
	src_timestamp <- getModificationTime (basename `joinFileExt` suff)

	let force_recomp = dopt Opt_ForceRecomp dflags
	source_unchanged <- 
          if force_recomp || not (isStopLn stop)
		-- Set source_unchanged to False unconditionally if
		--	(a) recompilation checker is off, or
		-- 	(b) we aren't going all the way to .o file (e.g. ghc -S)
	     then return False	
		-- Otherwise look at file modification dates
	     else do o_file_exists <- doesFileExist o_file
		     if not o_file_exists
		        then return False	-- Need to recompile
			else do t2 <- getModificationTime o_file
			        if t2 > src_timestamp
				  then return True
				  else return False

  -- get the DynFlags
	let hsc_lang = hscMaybeAdjustTarget dflags stop src_flavour (hscTarget dflags)
	let next_phase = hscNextPhase dflags src_flavour hsc_lang
	output_fn  <- get_output_fn dflags next_phase (Just location4)

        let dflags' = dflags { hscTarget = hsc_lang,
			       hscOutName = output_fn,
			       extCoreName = basename ++ ".hcr" }

	hsc_env <- newHscEnv dflags'

  -- Tell the finder cache about this module
	mod <- addHomeModuleToFinder hsc_env mod_name location4

  -- Make the ModSummary to hand to hscMain
	let
	    unused_field = panic "runPhase:ModSummary field"
		-- Some fields are not looked at by hscMain
	    mod_summary = ModSummary {	ms_mod 	     = mod, 
					ms_hsc_src   = src_flavour,
				 	ms_hspp_file = input_fn,
                                        ms_hspp_opts = dflags,
					ms_hspp_buf  = hspp_buf,
					ms_location  = location4,
					ms_hs_date   = src_timestamp,
					ms_obj_date  = Nothing,
					ms_imps	     = imps,
					ms_srcimps   = src_imps }

  -- run the compiler!
	mbResult <- hscCompileOneShot hsc_env
			  mod_summary source_unchanged 
			  Nothing	-- No iface
                          Nothing       -- No "module i of n" progress info

	case mbResult of
          Nothing -> throwDyn (PhaseFailed "hsc" (ExitFailure 1))
          Just HscNoRecomp
              -> do SysTools.touch dflags' "Touching object file" o_file
                    -- The .o file must have a later modification date
                    -- than the source file (else we wouldn't be in HscNoRecomp)
                    -- but we touch it anyway, to keep 'make' happy (we think).
                    return (StopLn, dflags', Just location4, o_file)
          Just (HscRecomp hasStub)
              -> do when hasStub $
                         do stub_o <- compileStub dflags' mod location4
                            consIORef v_Ld_inputs stub_o
                    -- In the case of hs-boot files, generate a dummy .o-boot 
                    -- stamp file for the benefit of Make
                    when (isHsBoot src_flavour) $
                      SysTools.touch dflags' "Touching object file" o_file
                    return (next_phase, dflags', Just location4, output_fn)

-----------------------------------------------------------------------------
-- Cmm phase

runPhase CmmCpp stop dflags basename suff input_fn get_output_fn maybe_loc
  = do
       output_fn <- get_output_fn dflags Cmm maybe_loc
       doCpp dflags False{-not raw-} True{-include CC opts-} input_fn output_fn	
       return (Cmm, dflags, maybe_loc, output_fn)

runPhase Cmm stop dflags basename suff input_fn get_output_fn maybe_loc
  = do
	let hsc_lang = hscMaybeAdjustTarget dflags stop HsSrcFile (hscTarget dflags)
	let next_phase = hscNextPhase dflags HsSrcFile hsc_lang
	output_fn <- get_output_fn dflags next_phase maybe_loc

        let dflags' = dflags { hscTarget = hsc_lang,
			       hscOutName = output_fn,
			       extCoreName = basename ++ ".hcr" }

	ok <- hscCmmFile dflags' input_fn

	when (not ok) $ throwDyn (PhaseFailed "cmm" (ExitFailure 1))

	return (next_phase, dflags, maybe_loc, output_fn)

-----------------------------------------------------------------------------
-- Cc phase

-- we don't support preprocessing .c files (with -E) now.  Doing so introduces
-- way too many hacks, and I can't say I've ever used it anyway.

runPhase cc_phase stop dflags basename suff input_fn get_output_fn maybe_loc
   | cc_phase `eqPhase` Cc || cc_phase `eqPhase` Ccpp || cc_phase `eqPhase` HCc
   = do	let cc_opts = getOpts dflags opt_c
	    hcc = cc_phase `eqPhase` HCc

       	let cmdline_include_paths = includePaths dflags

	-- HC files have the dependent packages stamped into them
	pkgs <- if hcc then getHCFilePackages input_fn else return []

	-- add package include paths even if we're just compiling .c
	-- files; this is the Value Add(TM) that using ghc instead of
	-- gcc gives you :)
        pkg_include_dirs <- getPackageIncludePath dflags pkgs
        let include_paths = foldr (\ x xs -> "-I" : x : xs) []
			      (cmdline_include_paths ++ pkg_include_dirs)

	let (md_c_flags, md_regd_c_flags) = machdepCCOpts dflags
        gcc_extra_viac_flags <- getExtraViaCOpts dflags
        let pic_c_flags = picCCOpts dflags

        let verb = getVerbFlag dflags

	pkg_extra_cc_opts <- getPackageExtraCcOpts dflags pkgs

	let split_objs = dopt Opt_SplitObjs dflags
	    split_opt | hcc && split_objs = [ "-DUSE_SPLIT_MARKERS" ]
		      | otherwise         = [ ]

	let excessPrecision = dopt Opt_ExcessPrecision dflags

	let cc_opt | optLevel dflags >= 2 = "-O2"
		   | otherwise            = "-O"

	-- Decide next phase
	
        let mangle =