1. 23 Mar, 2006 1 commit
  2. 12 Jan, 2006 1 commit
  3. 16 Dec, 2005 1 commit
    • simonmar's avatar
      [project @ 2005-12-16 11:26:01 by simonmar] · 28cb5a23
      simonmar authored
      Use standard calloc rather than rolling our own.
      
      As a small bonus, the standard libc version is more effecient about zeroing
      the memory.
      
      From: Duncan Coutts <duncan.coutts@worc.ox.ac.uk>
      28cb5a23
  4. 13 Jul, 2005 1 commit
  5. 12 Jul, 2005 1 commit
  6. 16 Feb, 2005 1 commit
  7. 28 Jan, 2005 1 commit
    • simonmar's avatar
      [project @ 2005-01-28 12:55:17 by simonmar] · 153b9cb9
      simonmar authored
      Rationalise the BUILD,HOST,TARGET defines.
      
      Recall that:
      
        - build is the platform we're building on
        - host is the platform we're running on
        - target is the platform we're generating code for
      
      The change is that now we take these definitions as applying from the
      point of view of the particular source code being built, rather than
      the point of view of the whole build tree.
      
      For example, in RTS and library code, we were previously testing the
      TARGET platform.  But under the new rule, the platform on which this
      code is going to run is the HOST platform.  TARGET only makes sense in
      the compiler sources.
      
      In practical terms, this means that the values of BUILD, HOST & TARGET
      may vary depending on which part of the build tree we are in.
      
      Actual changes:
      
       - new file: includes/ghcplatform.h contains platform defines for
         the RTS and library code.
      
       - new file: includes/ghcautoconf.h contains the autoconf settings
         only (HAVE_BLAH).  This is so that we can get hold of these
         settings independently of the platform defines when necessary
         (eg. in GHC).
      
       - ghcconfig.h now #includes both ghcplatform.h and ghcautoconf.h.
      
       - MachRegs.h, which is included into both the compiler and the RTS,
         now has to cope with the fact that it might need to test either
         _TARGET_ or _HOST_ depending on the context.
      
       - the compiler's Makefile now generates
           stage{1,2,3}/ghc_boot_platform.h
         which contains platform defines for the compiler.  These differ
         depending on the stage, of course: in stage2, the HOST is the
         TARGET of stage1.  This was wrong before.
      
       - The compiler doesn't get platform info from Config.hs any more.
         Previously it did (sometimes), but unless we want to generate
         a new Config.hs for each stage we can't do this.
      
       - GHC now helpfully defines *_{BUILD,HOST}_{OS,ARCH} automatically
         in CPP'd Haskell source.
      
       - ghcplatform.h defines *_TARGET_* for backwards compatibility
         (ghcplatform.h is included by ghcconfig.h, which is included by
         config.h, so code which still #includes config.h will get the TARGET
         settings as before).
      
       - The Users's Guide is updated to mention *_HOST_* rather than
         *_TARGET_*.
      
       - coding-style.html in the commentary now contains a section on
         platform defines.  There are further doc updates to come.
      
      Thanks to Wolfgang Thaller for pointing me in the right direction.
      153b9cb9
  8. 11 Oct, 2004 1 commit
  9. 03 Oct, 2004 2 commits
  10. 02 Oct, 2004 1 commit
    • dons's avatar
      [project @ 2004-10-02 07:32:25 by dons] · 20d697a1
      dons authored
      When linking against libpthreads, raise(3) can behave strangely on
      some platforms (OpenBSD at least, maybe other BSDs, not Linux). So use
      pthread_kill() to generate signals when running the threaded rts,
      instead of raise(), when System.Posix.Signals.raiseSignal is called.
      
      raiseSignal will call genericRaise, in the rts, which knows which
      function to use.
      20d697a1
  11. 06 Sep, 2004 1 commit
  12. 03 Sep, 2004 1 commit
    • simonmar's avatar
      [project @ 2004-09-03 15:28:18 by simonmar] · 95ca6bff
      simonmar authored
      Cleanup: all (well, most) messages from the RTS now go through the
      functions in RtsUtils: barf(), debugBelch() and errorBelch().  The
      latter two were previously called belch() and prog_belch()
      respectively.  See the comments for the right usage of these message
      functions.
      
      One reason for doing this is so that we can avoid spurious uses of
      stdout/stderr by Haskell apps on platforms where we shouldn't be using
      them (eg. non-console apps on Windows).
      95ca6bff
  13. 21 Oct, 2003 1 commit
  14. 22 Aug, 2003 1 commit
    • sof's avatar
      [project @ 2003-08-22 22:24:12 by sof] · cffcb52b
      sof authored
      setupRtsFlags(): don't overwrite argv[0] with its basename:
         - argv[] may not point to writeable memory
         - System.Environment.getProgName strips off the 'dirname' portion
           anyway.
         - Not possible to get at the untransformed argv[0] from
           Haskell code, should such a need arise.
      
      Uses of prog_argv[0] within the RTS has now been replaced with prog_name,
      which is the basename of prog_argv[0].
      cffcb52b
  15. 01 Apr, 2003 1 commit
  16. 31 Mar, 2003 1 commit
    • sof's avatar
      [project @ 2003-03-31 19:19:34 by sof] · f74458a7
      sof authored
      - Stable.c:enlargeStablePtrTable(): plug a mem leak,
        the (re-)allocation is in bytes, not words.
      - nuke RtsUtils.c:stgMallocWords(),
             RtsUtils.c:stgReallocWords()
      f74458a7
  17. 25 Mar, 2003 2 commits
  18. 19 Mar, 2003 1 commit
  19. 11 Dec, 2002 1 commit
    • simonmar's avatar
      [project @ 2002-12-11 15:36:20 by simonmar] · 0bffc410
      simonmar authored
      Merge the eval-apply-branch on to the HEAD
      ------------------------------------------
      
      This is a change to GHC's evaluation model in order to ultimately make
      GHC more portable and to reduce complexity in some areas.
      
      At some point we'll update the commentary to describe the new state of
      the RTS.  Pending that, the highlights of this change are:
      
        - No more Su.  The Su register is gone, update frames are one
          word smaller.
      
        - Slow-entry points and arg checks are gone.  Unknown function calls
          are handled by automatically-generated RTS entry points (AutoApply.hc,
          generated by the program in utils/genapply).
      
        - The stack layout is stricter: there are no "pending arguments" on
          the stack any more, the stack is always strictly a sequence of
          stack frames.
      
          This means that there's no need for LOOKS_LIKE_GHC_INFO() or
          LOOKS_LIKE_STATIC_CLOSURE() any more, and GHC doesn't need to know
          how to find the boundary between the text and data segments (BIG WIN!).
      
        - A couple of nasty hacks in the mangler caused by the neet to
          identify closure ptrs vs. info tables have gone away.
      
        - Info tables are a bit more complicated.  See InfoTables.h for the
          details.
      
        - As a side effect, GHCi can now deal with polymorphic seq.  Some bugs
          in GHCi which affected primitives and unboxed tuples are now
          fixed.
      
        - Binary sizes are reduced by about 7% on x86.  Performance is roughly
          similar, some programs get faster while some get slower.  I've seen
          GHCi perform worse on some examples, but haven't investigated
          further yet (GHCi performance *should* be about the same or better
          in theory).
      
        - Internally the code generator is rather better organised.  I've moved
          info-table generation from the NCG into the main codeGen where it is
          shared with the C back-end; info tables are now emitted as arrays
          of words in both back-ends.  The NCG is one step closer to being able
          to support profiling.
      
      This has all been fairly thoroughly tested, but no doubt I've messed
      up the commit in some way.
      0bffc410
  20. 05 Oct, 2002 1 commit
  21. 16 Aug, 2002 1 commit
  22. 17 Jul, 2002 1 commit
    • simonmar's avatar
      [project @ 2002-07-17 09:21:48 by simonmar] · 7457757f
      simonmar authored
      Remove most #includes of system headers from Stg.h, and instead
      #include any required headers directly in each RTS source file.
      
      The idea is to (a) reduce namespace pollution from system headers that
      we don't need, (c) be clearer about dependencies on system things in
      the RTS, and (c) improve via-C compilation times (maybe).
      
      In practice though, HsBase.h #includes everything anyway, so the
      difference from the point of view of .hc source is minimal.  However,
      this makes it easier to move to zero-includes if we wanted to (see
      discussion on the FFI list; I'm still not sure that's possible but
      at least this is a step in the right direction).
      7457757f
  23. 18 May, 2002 1 commit
  24. 14 Feb, 2002 1 commit
  25. 31 Oct, 2001 1 commit
  26. 29 Aug, 2001 2 commits
  27. 14 Aug, 2001 1 commit
    • sewardj's avatar
      [project @ 2001-08-14 13:40:07 by sewardj] · bc5c8021
      sewardj authored
      Change the story about POSIX headers in C compilation.
      
      Until now, all C code in the RTS and library cbits has by default been
      compiled with settings for POSIXness enabled, that is:
         #define _POSIX_SOURCE   1
         #define _POSIX_C_SOURCE 199309L
         #define _ISOC9X_SOURCE
      If you wanted to negate this, you'd have to define NON_POSIX_SOURCE
      before including headers.
      
      This scheme has some bad effects:
      
      * It means that ccall-unfoldings exported via interfaces from a
        module compiled with -DNON_POSIX_SOURCE may not compile when
        imported into a module which does not -DNON_POSIX_SOURCE.
      
      * It overlaps with the feature tests we do with autoconf.
      
      * It seems to have caused borkage in the Solaris builds for some
        considerable period of time.
      
      The New Way is:
      
      * The default changes to not-being-in-Posix mode.
      
      * If you want to force a C file into Posix mode, #include as
        the **first** include the new file ghc/includes/PosixSource.h.
        Most of the RTS C sources have this include now.
      
      * NON_POSIX_SOURCE is almost totally expunged.  Unfortunately
        we have to retain some vestiges of it in ghc/compiler so that
        modules compiled via C on Solaris using older compilers don't
        break.
      bc5c8021
  28. 24 Jul, 2001 1 commit
  29. 13 Feb, 2001 1 commit
    • rrt's avatar
      [project @ 2001-02-13 11:10:28 by rrt] · 7b76c2c1
      rrt authored
      Use MM timers on Windows even when not profiling, as threadDelay needs it
      to work properly.
      
      Flush stdout when quitting (in RtsUtils), as Linux glibc probably works now,
      and it reveals error messages that are otherwise truncated when one's
      program segfaults.
      7b76c2c1
  30. 17 Jul, 2000 1 commit
  31. 24 May, 2000 1 commit
  32. 14 Apr, 2000 1 commit
  33. 31 Mar, 2000 1 commit
    • hwloidl's avatar
      [project @ 2000-03-31 03:09:35 by hwloidl] · dd4c28a9
      hwloidl authored
      Numerous changes in the RTS to get GUM-4.06 working (currently works with
      parfib-ish programs). Most changes are isolated in the rts/parallel dir.
      
      rts/parallel/:
        The most important changes are a rewrite of the (un-)packing code (Pack.c)
        and changes in LAGA, GALA table operations (Global.c) expecially in
        rebuilding the tables during GC.
      
      rts/:
        Minor changes in Schedule.c, GC.c (interface to par specific root marking
        and evacuation), and lots of additions to Sanity.c (surprise ;-)
        Main.c change for startup: I use a new function rts_evalNothing to
        start non-main-PEs in a PAR || SMP setup (RtsAPI.c)
      
      includes/:
        Updated GranSim macros in PrimOps.h.
      
      lib/std:
        Few changes in PrelHandle.c etc replacing ForeignObj by Addr in a PAR
        setup (we still don't support ForeignObjs or WeakPtrs in GUM).
        Typically use
          #define FILE_OBJECT	    Addr
        when dealing with files.
      
      hslibs/lang/:
        Same as above (in Foreign(Obj).lhs, Weak.lhs, IOExts.lhs etc).
      
      -- HWL
      dd4c28a9
  34. 13 Jan, 2000 2 commits
    • hwloidl's avatar
      [project @ 2000-01-13 14:33:57 by hwloidl] · 1b28d4e1
      hwloidl authored
      Merged GUM-4-04 branch into the main trunk. In particular merged GUM and
      SMP code. Most of the GranSim code in GUM-4-04 still has to be carried over.
      1b28d4e1
    • simonmar's avatar
      [project @ 2000-01-13 12:40:15 by simonmar] · be587a37
      simonmar authored
      - remove AllBlocked scheduler return code.  Nobody owned up to having
        created it or even knowing what it was there for.
      
      - clean up fatal error condition handling somewhat.  The process
        exit code from a GHC program now indicates the kind of failure
        for certain kinds of exit:
      
      	general internal RTS error	254
      	program deadlocked		253
      	program interrupted (ctrl-C)	252
      	heap overflow			251
      	main thread killed		250
      
        and we leave exit codes 1-199 for the user (as is traditional at MS,
        200-249 are reserved for future expansion, and may contain
        undocumented extensions :-)
      be587a37
  35. 12 Jan, 2000 1 commit
  36. 09 Nov, 1999 1 commit