Makefile 24.5 KB
Newer Older
1
############################################################################
2
#
3
#		This is the top-level Makefile for GHC
4
#
5 6
# Targets: 
#
lennart@augustsson.net's avatar
lennart@augustsson.net committed
7
# 	bootstrap (DEFAULT)
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
#		Builds GHC, then builds the libraries,
#		then uses this GHC ("stage 1") to build itself
#		("stage 2").
#
#	bootstrap2
#		Same as bootstrap
#
#	bootstrap3
#		bootstrap2 + we build GHC one more time ("stage 3")
#
#	stage1
#		Just build up to stage 1
#
#	stage2
#		Just build stage 2 (stage 1 must be built)
#
#	stage3
#		Just build stage 3 (stage 2 must be built)
#
#	all
#		Same as bootstrap
#
#       install
#		Install everything, including stage 2 compiler by default
#		(override with stage=3, for example).
#
#	dist
#		Make a source dist (WARNING: runs 'make distclean' first)
#
#	binary-dist
#		Builds a binary distribution
#
40 41 42 43 44 45 46 47
#	framework-pkg  [MacOS only]
#		Builds /Library/Frameworks/GHC.framework wrapped into a Mac
#		installer package
#
#	framework-binary-dist  [MacOS only]
#		Builds GHC.framework encapsulating a binary distribution
#		(to give a relocatable framework)
#
48 49 50 51 52
#	hc-file-bundle
#		Builds an HC-file bundle, for bootstrapping
#
#	clean, distclean, maintainer-clean
#		Increasing levels of cleanliness
53
#
54
############################################################################
55

56 57
TOP=.
include $(TOP)/mk/boilerplate.mk
58

59
#
60 61
# Order is important! It's e.g. necessary to descend into include/
# before the rest to have a config.h, etc.
62
#
63 64 65 66
# If we're booting from .hc files, swap the order
# we descend into subdirs - to boot utils must be before driver.
#
.PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
67

68 69
# We can't 'make boot' in libraries until stage1 is built
ifeq "$(BootingFromHc)" "YES"
70
SUBDIRS_BUILD = includes compiler docs utils driver
71
else
72
SUBDIRS_BUILD = includes utils driver docs compiler libraries/Cabal/doc
73 74
endif

75
SUBDIRS = gmp libffi includes utils docs rts compiler ghc driver libraries libraries/Cabal/doc
76

Ian Lynagh's avatar
Ian Lynagh committed
77
check-all: check-packages check-tools
78

79
# Sanity check that all the boot libraries are in the tree, to catch
80 81
# failure to run darcs-all.
check-packages :
82
	@ds=`grep "^[^# ][^ ]*  *[^ ][^ ]*  *[^ ][^ ]*$$" packages | sed "s/ .*//"`;\
83
	for d in $$ds; do \
84 85
	  if test ! -d $$d; then \
	     echo "Looks like you're missing $$d,"; \
86
	     echo "maybe you haven't done './darcs-all get'?"; \
87 88 89
	     exit 1; \
	  fi \
	done
90
	@if test ! -f libraries/base/configure; then \
91 92 93 94
	    echo "Looks like you're missing base's configure script."; \
	    echo "Did you run 'sh boot' at the top level?"; \
	    exit 1; \
	fi
95

Ian Lynagh's avatar
Ian Lynagh committed
96 97 98
HAVE_EVAL := NO
$(eval HAVE_EVAL := YES)

Ian Lynagh's avatar
Ian Lynagh committed
99 100 101 102 103
check-tools:
ifeq "$(HSCOLOUR_SRCS) $(HSCOLOUR)" "YES "
	@echo "HsColour needed but wasn't found."
	@echo "Set HSCOLOUR_SRCS=NO if you don't want to use it"
	exit 1
Ian Lynagh's avatar
Ian Lynagh committed
104 105 106 107
endif
ifeq "$(HAVE_EVAL)" "NO"
	@echo "Your make doesn't support eval. You need GNU make >= 3.80"
	exit 1
Ian Lynagh's avatar
Ian Lynagh committed
108 109 110
endif
	@:

111 112 113 114 115 116
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
ifneq "$(WhatGccIsCalled)" ""
GCC_LIB_DEP = stamp.inplace-gcc-lib
endif
endif

117
stage1 : $(GCC_LIB_DEP) check-all
118
	$(MAKE) -C libraries boot
119
	$(MAKE) -C gmp       all
120
	$(MAKE) -C utils/mkdependC boot
121
	$(MAKE) -C utils with-bootstrapping-compiler
122
	@case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
123
	for i in $(SUBDIRS_BUILD); do \
124 125 126 127 128 129 130
	  echo "------------------------------------------------------------------------"; \
	  echo "== $(MAKE) boot $(MFLAGS);"; \
	  echo " in $(shell pwd)/$$i"; \
	  echo "------------------------------------------------------------------------"; \
	  $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
	  if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
	done; \
131
	for i in $(SUBDIRS_BUILD); do \
132 133 134 135 136 137
	  echo "------------------------------------------------------------------------"; \
	  echo "== $(MAKE) all $(MFLAGS);"; \
	  echo " in $(shell pwd)/$$i"; \
	  echo "------------------------------------------------------------------------"; \
	  $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
	  if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
138
	done
139
	$(MAKE) -C libffi    all
140 141
	$(MAKE) -C rts boot
	$(MAKE) -C rts
Ian Lynagh's avatar
Ian Lynagh committed
142
	$(MAKE) -C libraries all
143

144 145 146 147 148 149 150
# When making distributions (i.e., whether with binary-dist or using the 
# vanilla install target to create an installer package), we can have problems
# if some things (e.g. ghc-pkg) are compiled with the bootstrapping compiler 
# and some (e.g. the stage 2 compiler) with the stage1 compiler. See #1860 for
# an example.  Thus, we explicitly build a second version with the stage 1 
# compiler of all utils that get installed and of all extra support binaries
# includes in binary dists.
151
stage2 : check-all
152
	$(MAKE) -C compiler stage=2 boot
153
	$(MAKE) -C compiler stage=2
154
	$(MAKE) -C utils with-stage-2
155
	$(MAKE) -C libraries stage=2 all
156
ifeq "$(HADDOCK_DOCS)" "YES"
157 158
	$(MAKE) -C libraries doc
	$(MAKE) -C compiler  doc stage=2
159
endif
160

161
stage3 : check-all
162
	$(MAKE) -C compiler stage=3 boot
163
	$(MAKE) -C compiler stage=3
164 165

bootstrap  : bootstrap2
166 167 168 169 170 171

bootstrap2 : stage1
	$(MAKE) stage2

bootstrap3 : bootstrap2
	$(MAKE) stage3
172

173 174 175 176 177 178 179 180 181 182 183
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
ifneq "$(WhatGccIsCalled)" ""
all :: stamp.inplace-gcc-lib

.PHONY: stamp.inplace-gcc-lib

# This is a hack to make Cabal able to find ld when we run tests with
# the inplace ghc. We should probably install all the gcc stuff in our
# tree somewhere, and then have install copy it from there rather than
# from the filesystem.
stamp.inplace-gcc-lib:
184 185 186
	$(RM) -r ghc/gcc-lib
	mkdir ghc/gcc-lib
	cp $(LD) ghc/gcc-lib
187 188 189
	touch $@

clean ::
190
	$(RM) -r ghc/gcc-lib
191 192 193 194
	$(RM) -f inplace-gcc-lib
endif
endif

195 196
all :: bootstrap

197 198 199
# -----------------------------------------------------------------------------
# Installing

200 201 202 203 204 205 206 207
# We want to install the stage 2 bootstrapped compiler by default, but we let
# the user override this by saying 'make install stage=1', for example.
ifeq "$(stage)" ""
INSTALL_STAGE = stage=2
else
INSTALL_STAGE =
endif

208 209 210
install-strip:
	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install

211
# Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
212
install :: check-packages
213 214
	$(MKDIRHIER) $(DESTDIR)$(datadir)
	echo "[]" > $(DESTDIR)$(datadir)/package.conf
215
	@case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
216
	for i in $(SUBDIRS); do \
217 218 219 220 221 222
	  echo "------------------------------------------------------------------------"; \
	  echo "== $(MAKE) $@ $(MFLAGS);"; \
	  echo " in $(shell pwd)/$$i"; \
	  echo "------------------------------------------------------------------------"; \
	  $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
	  if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
223 224
	done

225 226 227 228
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
# These files need to be in the InstallShield
# INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
# in the top-level directory of the distribution
Simon Marlow's avatar
Simon Marlow committed
229
INSTALL_DATAS += ANNOUNCE LICENSE README
230 231
endif

232 233 234 235 236 237 238 239 240 241 242
# If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
# and the perl interpreter and dll into the GHC prefix directory.
# Gcc and Perl source locations derived from configuration data.
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
ifneq "$(WhatGccIsCalled)" ""
install ::
	-mkdir $(prefix)/gcc-lib
	-mkdir $(prefix)/include
	-mkdir $(prefix)/include/mingw
	-cp -rp $(GccDir)../include/* $(prefix)/include/mingw
	-cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
243 244
	-cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
	-cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
245 246 247 248 249 250 251 252 253 254 255
	-cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
	-cp $(GccDir)gcc.exe $(prefix)
	-cp $(GccDir)as.exe $(prefix)/gcc-lib
	-cp $(GccDir)ld.exe $(prefix)/gcc-lib
	-cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
	-cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
	-cp $(GhcDir)../perl.exe $(prefix)
	-cp $(GhcDir)../perl56.dll $(prefix)
endif
endif

256 257
# Install gcc-extra-opts
install ::
Ian Lynagh's avatar
Ian Lynagh committed
258 259
	$(INSTALL_DIR) $(DESTDIR)$(libdir)
	$(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
260

261 262
install-docs ::
	@case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
263
	for i in $(SUBDIRS); do \
264 265 266 267 268 269
	  echo "------------------------------------------------------------------------"; \
	  echo "== $(MAKE) $@ $(MFLAGS);"; \
	  echo " in $(shell pwd)/$$i"; \
	  echo "------------------------------------------------------------------------"; \
	  $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
	  if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
270 271
	done

272
# -----------------------------------------------------------------------------
273 274
# Making a binary distribution
#
275
# `dist' `binary-dist'
276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291
#      Create a distribution tar file for this program. The tar file
#      should be set up so that the file names in the tar file start with
#      a subdirectory name which is the name of the package it is a
#      distribution for. This name can include the version number.
#
#      For example, the distribution tar file of GCC version 1.40 unpacks
#      into a subdirectory named `gcc-1.40'.
# 
#      The easiest way to do this is to create a subdirectory
#      appropriately named, use ln or cp to install the proper files in
#      it, and then tar that subdirectory.
# 
#      The dist target should explicitly depend on all non-source files
#      that are in the distribution, to make sure they are up to date in
#      the distribution. See Making Releases.
#
292
#	binary-dist is a GHC addition for binary distributions
293 294
# 

Ian Lynagh's avatar
Ian Lynagh committed
295 296
binary-dist::
	-rm -rf $(BIN_DIST_DIR)
297
	-$(RM) $(BIN_DIST_TAR_BZ2)
Ian Lynagh's avatar
Ian Lynagh committed
298

Ian Lynagh's avatar
Ian Lynagh committed
299 300 301
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"

binary-dist::
302
	$(MAKE) prefix=$(BIN_DIST_DIR) install
303
	$(MAKE) prefix=$(BIN_DIST_DIR) install-docs
Ian Lynagh's avatar
Ian Lynagh committed
304 305

binary-dist::
306
	cd $(BIN_DIST_DIR) && $(SHELL) ../distrib/prep-bin-dist-mingw
Ian Lynagh's avatar
Ian Lynagh committed
307

308 309 310 311
binary-dist::
	$(MKDIRHIER) $(BIN_DIST_DIR)/icons
	cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons

312 313 314 315 316
# Tar up the distribution and build a manifest
binary-dist :: tar-binary-dist

.PHONY: tar-binary-dist
tar-binary-dist:
317 318
	( cd $(BIN_DIST_TOPDIR_ABS); $(TAR) cf - $(BIN_DIST_NAME) | bzip2 > $(FPTOOLS_TOP_ABS)/$(BIN_DIST_TAR_BZ2) )
	( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(FPTOOLS_TOP_ABS)/$(BIN_DIST_TAR_BZ2) | $(TAR) tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >$(FPTOOLS_TOP_ABS)/bin-manifest-$(ProjectVersion) )
319

Ian Lynagh's avatar
Ian Lynagh committed
320 321
else

322
.PHONY: binary-dist
323

324
BIN_DIST_VARFILE=$(BIN_DIST_PREP)/Makefile-vars.in
325

326
WHERE_AM_I = $(BIN_DIST_NAME)
327

Ian Lynagh's avatar
Ian Lynagh committed
328
binary-dist::
329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351
# For the most part we will be putting filenames in $(BIN_DIST_LIST),
# and telling tar to tar all of those files up. So to start with we
# remove $(BIN_DIST_LIST) so that we can start with an empty slate
	$(RM) -f $(BIN_DIST_LIST)
# Now we add a few files from mk/ to $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/mk/package.mk     >> $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/mk/install.mk     >> $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/mk/recurse.mk     >> $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/mk/cabal.mk       >> $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/mk/cabal-flags.mk >> $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/mk/fptools.css    >> $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/ANNOUNCE          >> $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/LICENSE           >> $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/install-sh        >> $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/extra-gcc-opts.in >> $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/config.guess      >> $(BIN_DIST_LIST)
	echo $(WHERE_AM_I)/config.sub        >> $(BIN_DIST_LIST)
# Now we recurse into various subdirectories and tell them to add and
# files that they want into $(BIN_DIST_LIST)
# XXX Ug, this duplication of "-C foo WHERE_AM_I=.../foo" isn't nice.
	$(MAKE) -C gmp                 binary-dist WHERE_AM_I=$(WHERE_AM_I)/gmp
	$(MAKE) -C includes            binary-dist WHERE_AM_I=$(WHERE_AM_I)/includes
	$(MAKE) -C compiler            binary-dist WHERE_AM_I=$(WHERE_AM_I)/compiler $(INSTALL_STAGE)
Ian Lynagh's avatar
Ian Lynagh committed
352
	$(MAKE) -C ghc                 binary-dist WHERE_AM_I=$(WHERE_AM_I)/ghc      $(INSTALL_STAGE)
353 354 355 356
	$(MAKE) -C rts                 binary-dist WHERE_AM_I=$(WHERE_AM_I)/rts
	$(MAKE) -C driver              binary-dist WHERE_AM_I=$(WHERE_AM_I)/driver
	$(MAKE) -C utils               binary-dist WHERE_AM_I=$(WHERE_AM_I)/utils
	$(MAKE) -C docs                binary-dist WHERE_AM_I=$(WHERE_AM_I)/docs
357
	$(MAKE) -C libffi              binary-dist WHERE_AM_I=$(WHERE_AM_I)/libffi
358 359 360 361 362 363 364 365 366 367 368 369 370
	$(MAKE) -C libraries           binary-dist WHERE_AM_I=$(WHERE_AM_I)/libraries
	$(MAKE) -C libraries/Cabal/doc binary-dist WHERE_AM_I=$(WHERE_AM_I)/libraries/Cabal/doc
# Now thinks get messier. Some files we need to move around, rename or
# generate. We do this under $(BIN_DIST_PREP).
	$(RM) -rf    $(BIN_DIST_PREP_DIR)
	$(MKDIRHIER) $(BIN_DIST_PREP)/mk
	echo 'include $$(TOP)/Makefile-vars' >  $(BIN_DIST_PREP)/mk/boilerplate.mk
	echo 'include $$(TOP)/mk/package.mk' >  $(BIN_DIST_PREP)/mk/target.mk
	echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_PREP)/mk/target.mk
	echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_PREP)/mk/target.mk
	touch                                   $(BIN_DIST_PREP)/mk/bindist.mk
ifeq "$(darwin_TARGET_OS)" "1"
	cp mk/fix_install_names.sh $(BIN_DIST_PREP)/mk
371 372
endif

373 374 375 376 377 378 379 380
	cp distrib/Makefile         $(BIN_DIST_PREP)
	cp distrib/INSTALL          $(BIN_DIST_PREP)
	cp distrib/README           $(BIN_DIST_PREP)
	cp distrib/configure-bin.ac $(BIN_DIST_PREP)/configure.ac
# We can't just list aclocal.m4 in $(BIN_DIST_LIST), as it needs to be
# next to configure.ac when we run autoreconf
	cp aclocal.m4               $(BIN_DIST_PREP)
	cd $(BIN_DIST_PREP) && autoreconf
Ian Lynagh's avatar
Ian Lynagh committed
381 382 383 384 385 386 387 388 389
# We need to copy the pwd program that was built with stage1 to where
# the build system expects to find it, i.e. the location the pwd built
# with the bootstrapping compiler normally occupies
	$(MKDIRHIER) $(BIN_DIST_PREP)/utils/pwd
	cp utils/pwd/dist-install/build/pwd/pwd $(BIN_DIST_PREP)/utils/pwd
# And likewise the installPackage program
	$(MKDIRHIER) $(BIN_DIST_PREP)/utils/installPackage/install-inplace/bin
	cp utils/installPackage/dist-install/build/installPackage/installPackage \
	   $(BIN_DIST_PREP)/utils/installPackage/install-inplace/bin
390 391 392 393 394 395 396 397 398 399 400 401 402 403

	echo "package = ghc"                              >> $(BIN_DIST_VARFILE)
	echo "version = $(ProjectVersion)"                >> $(BIN_DIST_VARFILE)
	echo "ProjectVersion = $(ProjectVersion)"         >> $(BIN_DIST_VARFILE)
	echo "HaveLibGmp = $(HaveLibGmp)"                 >> $(BIN_DIST_VARFILE)
	echo "GhcLibsWithUnix = $(GhcLibsWithUnix)"       >> $(BIN_DIST_VARFILE)
	echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(BIN_DIST_VARFILE)
	echo "GhcHasEditline = $(GhcHasEditline)"         >> $(BIN_DIST_VARFILE)
	echo "BootingFromHc = $(BootingFromHc)"           >> $(BIN_DIST_VARFILE)
	echo "XMLDocWays = $(XMLDocWays)"                 >> $(BIN_DIST_VARFILE)
# We won't actually use xsltproc, but we need to know if it's "" or not
	echo "XSLTPROC = $(XSLTPROC)"                     >> $(BIN_DIST_VARFILE)
	echo "TARGETPLATFORM = $(TARGETPLATFORM)"         >> $(BIN_DIST_VARFILE)
	echo "HADDOCK_DOCS = $(HADDOCK_DOCS)"             >> $(BIN_DIST_VARFILE)
404
	echo "LATEX_DOCS = $(LATEX_DOCS)"                 >> $(BIN_DIST_VARFILE)
Ian Lynagh's avatar
Ian Lynagh committed
405
	echo "INTEGER_LIBRARY = $(INTEGER_LIBRARY)"       >> $(BIN_DIST_VARFILE)
406 407 408 409 410 411
	cat distrib/Makefile-bin-vars.in                  >> $(BIN_DIST_VARFILE)

# With that done, we can now build the actual tarball

	$(RM) -f $(BIN_DIST_NAME)
	ln -s . $(BIN_DIST_NAME)
412 413
# h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
# tree then we want to include the real file, not a symlink to it
Ian Lynagh's avatar
Ian Lynagh committed
414
	$(TAR) hcf $(BIN_DIST_TAR) -T $(BIN_DIST_LIST)
415
	cd $(BIN_DIST_PREP_DIR) && $(TAR) rf ../$(BIN_DIST_TAR) $(BIN_DIST_NAME)
416
	bzip2 < $(BIN_DIST_TAR) > $(BIN_DIST_TAR_BZ2)
Ian Lynagh's avatar
Ian Lynagh committed
417
	$(TAR) tf $(BIN_DIST_TAR) | sort > bin-manifest-$(ProjectVersion)
418
endif
419

420
PUBLISH_FILES = $(BIN_DIST_TAR_BZ2)
421 422 423 424

# Upload the distribution and documentation
ifneq "$(ISCC)" ""
WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
Ian Lynagh's avatar
Ian Lynagh committed
425
WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
426 427 428 429 430 431 432 433 434 435

PUBLISH_FILES += $(WINDOWS_INSTALLER)

binary-dist :: generate-windows-installer

.PHONY: generate-windows-installer
generate-windows-installer ::
	$(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
endif

Simon Marlow's avatar
Simon Marlow committed
436
# Upload the distribution and documentation
437
ifneq "$(PublishLocation)" ""
Ian Lynagh's avatar
Ian Lynagh committed
438 439
publish ::
	make publish-binary-dist 'prefix=$(BIN_DIST_INST_DIR)'
440 441
endif

442 443
nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done

444
.PHONY: publish-binary-dist
445
publish-binary-dist ::
446 447
	@for f in $(PUBLISH_FILES); \
	    do $(call nTimes,10,$(PublishCp) $$f $(PublishLocation)/dist); \
448
	done
449

Ian Lynagh's avatar
Ian Lynagh committed
450 451 452
# You need to "make binddisttest" before publishing the docs, as it
# works by publish setting $(prefix) to inside the binddisttest
# directory so $(docdir) points to the right place.
Ian Lynagh's avatar
Ian Lynagh committed
453 454 455 456 457 458 459 460 461 462 463

# We assume that Windows means Cygwin, as we can't just use docdir
# unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
# the machine c.

ifeq "$(Windows)" "YES"
PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
else
PUBLISH_DOCDIR = $(docdir)
endif

464
publish-binary-dist ::
465
	$(call nTimes,10,$(PublishCp) -r "$(PUBLISH_DOCDIR)"/* $(PublishLocation)/docs)
Simon Marlow's avatar
Simon Marlow committed
466

467 468 469
binary-dist::
	@echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"

470 471 472 473 474 475 476 477 478 479 480
# -----------------------------------------------------------------------------
# Building MacOS installer packages
#
# 'framework-pkg'
#	Create an installer package for /Library/Frameworks/GHC.framework
#
# 'framework-binary-dist'
#	Create an installer package for GHC.framework encapsulating a
#	binary-dist to make it relocatable
#	FIXME: This is only partially implemented so far

481 482
ifeq "$(darwin_TARGET_OS)" "1"

483
.PHONY: framework-pkg framework-binary-dist
484 485 486 487 488 489

framework-pkg:
	$(MAKE) -C distrib/MacOS framework-pkg

framework-binary-dist:
	$(MAKE) -C distrib/MacOS framework-binary-dist
490 491 492

endif

493
# -----------------------------------------------------------------------------
494 495 496 497
# Building source distributions
#
# Do it like this: 
#
498
#	$ make
499
#	$ make dist
500 501 502
#
# WARNING: `make dist' calls `make distclean' before tarring up the tree.
#
503 504 505 506 507 508

.PHONY: dist

#
# Directory in which we're going to build the src dist
#
Simon Marlow's avatar
Simon Marlow committed
509
SRC_DIST_NAME=ghc-$(ProjectVersion)
510 511 512 513 514
SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)

#
# Files to include in source distributions
#
515
SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS))
516
SRC_DIST_FILES += \
517
	configure.ac config.guess config.sub configure \
Simon Marlow's avatar
Simon Marlow committed
518
	aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
519
	ghc.spec.in ghc.spec extra-gcc-opts.in VERSION boot
520

521 522
# -----------------------------------------------------------------------------
# Source distributions
523

524 525 526 527 528 529 530 531 532
# A source dist is built from a complete build tree, because we
# require some extra files not contained in a darcs checkout: the
# output from Happy and Alex, for example.
# 
# The steps performed by 'make dist' are as follows:
#   - create a complete link-tree of the current build tree in /tmp
#   - run 'make distclean' on that tree
#   - remove a bunch of other files that we know shouldn't be in the dist
#   - tar up first the extralibs package, then the main source package
533

534
EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/%, $(shell grep -E "extralibs|dph" packages | grep -v "^\#" | sed "s/ .*//"))
535

536 537 538
SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2

539 540 541 542 543
VERSION :
	echo $(ProjectVersion) >VERSION

dist :: VERSION

544 545 546 547 548 549 550 551 552 553 554
# Use:
#     $(call copy_generated_compiler_file,cmm,CmmLex,x)
# to copy the generated file that replaces compiler/cmm/CmmLex.x
# XXX Should this be unconditional? Do we want to support making a src dist
# from an unbuilt tree?
copy_generated_compiler_file = \
  if test -f $(FPTOOLS_TOP_ABS)/compiler/dist-stage2/build/$2.hs; \
  then \
    $(CP) $(FPTOOLS_TOP_ABS)/compiler/dist-stage2/build/$2.hs compiler/$1/ ; \
    mv compiler/$1/$2.$3 compiler/$1/$2.$3.source ; \
  fi
555 556 557 558 559 560
copy_generated_util_file = \
  if test -f $(FPTOOLS_TOP_ABS)/utils/$1/dist-install/build/$1/$1-tmp/$2.hs; \
  then \
    $(CP) $(FPTOOLS_TOP_ABS)/utils/$1/dist-install/build/$1/$1-tmp/$2.hs utils/$1/ ; \
    mv utils/$1/$2.$3 utils/$1/$2.$3.source ; \
  fi
561

562 563 564 565 566 567 568 569
dist ::
	$(RM) -rf $(SRC_DIST_DIR)
	$(RM) $(SRC_DIST_NAME).tar.gz
	mkdir $(SRC_DIST_DIR)
	( cd $(SRC_DIST_DIR) \
	  && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
	  && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
	  && $(MAKE) distclean \
570
	  && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
571 572
	  && $(call copy_generated_compiler_file,cmm,CmmLex,x) \
	  && $(call copy_generated_compiler_file,cmm,CmmParse,y) \
573
	  && $(call copy_generated_compiler_file,main,ParsePkgConf,y) \
574 575 576 577 578
	  && $(call copy_generated_compiler_file,parser,HaddockLex,x) \
	  && $(call copy_generated_compiler_file,parser,HaddockParse,y) \
	  && $(call copy_generated_compiler_file,parser,Lexer,x) \
	  && $(call copy_generated_compiler_file,parser,Parser,y.pp) \
	  && $(call copy_generated_compiler_file,parser,ParserCore,y) \
579
	  && $(call copy_generated_util_file,hpc,HpcParser,y) \
580 581 582
	  && $(RM) -rf compiler/stage[123] mk/build.mk \
	  && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
	)
Ian Lynagh's avatar
Ian Lynagh committed
583
	$(TAR) chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
584
	$(RM) -rf $(EXTRA_LIBS)
Ian Lynagh's avatar
Ian Lynagh committed
585
	$(TAR) chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
586 587 588 589 590 591 592

# Upload the distribution(s)
# Retrying is to work around buggy firewalls that corrupt large file transfers
# over SSH.
ifneq "$(PublishLocation)" ""
dist ::
	@for i in 0 1 2 3 4 5 6 7 8 9; do \
593
		echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
594
		if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi; \
595 596
	done
	@for i in 0 1 2 3 4 5 6 7 8 9; do \
597
		echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
598
		if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi; \
599 600
	done
endif
601 602

# -----------------------------------------------------------------------------
603 604
# HC file bundles

Simon Marlow's avatar
Simon Marlow committed
605
hc-file-bundle :
Simon Marlow's avatar
Simon Marlow committed
606 607 608 609 610
	$(RM) -r ghc-$(ProjectVersion)
	$(LN_S) . ghc-$(ProjectVersion)
	$(FIND) ghc-$(ProjectVersion)/compiler \
	     ghc-$(ProjectVersion)/utils \
	     ghc-$(ProjectVersion)/libraries -follow \
sof's avatar
sof committed
611
	  \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
Simon Marlow's avatar
Simon Marlow committed
612
	for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
Ian Lynagh's avatar
Ian Lynagh committed
613
	     if test "x$$f" != "x" && test -f `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
sof's avatar
sof committed
614 615 616
	        echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
	     fi; \
	done;
Simon Marlow's avatar
Simon Marlow committed
617
	for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
618 619 620 621
	     if test "x$$f" != "x"; then \
	        echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
	     fi; \
	done;
Simon Marlow's avatar
Simon Marlow committed
622 623 624 625 626
	echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
	echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
	echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
	echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
	echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
Ian Lynagh's avatar
Ian Lynagh committed
627
	$(TAR) czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
628

629 630 631
# -----------------------------------------------------------------------------
# Cleaning

632
CLEAN_FILES += hc-files-to-go *-hc.tar.gz
633

634
DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
635
	docs/users_guide/ug-book.xml extra-gcc-opts
636 637

# don't clean config.mk: it's needed when cleaning stuff later on
638
LATE_DIST_CLEAN_FILES += mk/config.mk mk/are-validating.mk
639

640 641 642
# VERSION is shipped in a source dist
MAINTAINER_CLEAN_FILES += VERSION

643 644 645
extraclean::
	$(RM) -rf autom4te.cache

646 647 648
clean distclean ::
	$(RM) -rf inplace-datadir

Ian Lynagh's avatar
Ian Lynagh committed
649 650
clean distclean ::
	$(MAKE) -C bindisttest $@
651
	if test -d testsuite; then $(MAKE) -C testsuite $@; fi
Ian Lynagh's avatar
Ian Lynagh committed
652

653
# -----------------------------------------------------------------------------
654

sof's avatar
sof committed
655 656 657 658 659
# Turn off target.mk's rules for 'all', 'boot' and 'install'.
NO_BOOT_TARGET=YES
NO_ALL_TARGET=YES
NO_INSTALL_TARGET=YES

660 661
include $(TOP)/mk/target.mk

662 663
# -----------------------------------------------------------------------------