Makefile

############################################################################
#
#			fptools/Makefile
#
#		This is the main Makefile for fptools.
#
############################################################################

TOP=.
include $(TOP)/mk/boilerplate.mk

# find the projects that actually exist...
ProjectsThatExist = $(filter $(patsubst %/, %, $(wildcard */)), $(AllProjects))

# and filter only those that the user requested, if necessary
ifeq "$(ProjectsToBuild)" ""
SUBDIRS = $(ProjectsThatExist)
else
SUBDIRS = $(filter $(ProjectsToBuild), $(ProjectsThatExist))
endif

ifneq "$(Project)" ""
   ifeq "$(Project)" "GreenCard"
       ProjectDirectory=green-card
   else
	ifeq "$(Project)" "HaskellDirect"
		ProjectDirectory=hdirect
	else
		ProjectDirectory=$(Project)
	endif
   endif
   include $(shell echo $(ProjectDirectory) | tr A-Z a-z)/mk/config.mk
endif

# -----------------------------------------------------------------------------
# Certain targets require that Project is set from the command line.

CURRENT_TARGET = $(MAKECMDGOALS)
project-check :
	@if [ "$(Project)" = "" ]; then \
		echo "	You need to set \"Project\" in order to make $(CURRENT_TARGET)"; \
		echo "	eg. make $(CURRENT_TARGET) Project=Ghc"; \
		exit 1; \
	fi

# -----------------------------------------------------------------------------
# Making a binary distribution
#
# To make a particular binary distribution: 
# set $(Project) to the name of the project, capitalised (eg. Ghc or Happy).

# `dist' `binary-dist'
#      Create a distribution tar file for this program. The tar file
#      should be set up so that the file names in the tar file start with
#      a subdirectory name which is the name of the package it is a
#      distribution for. This name can include the version number.
#
#      For example, the distribution tar file of GCC version 1.40 unpacks
#      into a subdirectory named `gcc-1.40'.
# 
#      The easiest way to do this is to create a subdirectory
#      appropriately named, use ln or cp to install the proper files in
#      it, and then tar that subdirectory.
# 
#      The dist target should explicitly depend on all non-source files
#      that are in the distribution, to make sure they are up to date in
#      the distribution. See Making Releases.
#
#	binary-dist is an FPtools addition for binary distributions
# 

binary-dist :: project-check

BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS)
BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion)

#
# list of toplevel directories to include in binary distrib.
#
BIN_DIST_MAIN_DIR=$($(Project)MainDir)
BIN_DIST_DIRS=$($(Project)BinDistDirs)

binary-dist:: binary-dist-pre

BIN_DIST_TOP= distrib/Makefile-bin.in \
	      distrib/configure-bin.in \
	      distrib/INSTALL \
	      $(BIN_DIST_MAIN_DIR)/ANNOUNCE \
	      $(BIN_DIST_MAIN_DIR)/VERSION \
	      $(BIN_DIST_MAIN_DIR)/LICENSE \
	      $(BIN_DIST_MAIN_DIR)/README \
	      glafp-utils/mkdirhier/mkdirhier \
	      install-sh \
	      config.guess \
	      config.sub   \
	      aclocal.m4

#
# binary-dist creates a binary bundle, set BIN_DIST_NAME
# to package name and do `make binary-dist Project=<project-name>'
# (normally this just a thing you would do from the toplevel of fptools)
#
.PHONY: binary-dist-pre binary-dist binary-pack

BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion)
BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS)

binary-dist-pre::
ifeq "$(BIN_DIST)" ""
	echo "WARNING: To run the binary-dist target, you need to set BIN_DIST=1 in your build.mk" && exit 1
endif
	-rm -rf $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)
	-$(RM) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME).tar.gz
	-echo "BIN_DIST_DIRS = $(BIN_DIST_DIRS)"
	@for i in $(BIN_DIST_DIRS); do 		 	 \
	  if test -d "$$i"; then 			 \
	   echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \
	   $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \
	   echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \
	   $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \
	   echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
	   $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
	   echo $(MAKE) -C $$i $(MFLAGS) install \
		prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
		exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
		bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
		libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
		libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
		datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
	   $(MAKE) -C $$i $(MFLAGS) install \
		prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
		exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
		bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
		libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
		libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
		datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
	  fi; \
	done

binary-dist::
	@for i in $(BIN_DIST_TOP); do \
	  if test -f "$$i"; then \
	     echo cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \
	     cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \
	  fi; \
	done;
	@echo "Configuring the Makefile for this project..."
	touch $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
	echo "package = $(ProjectNameShort)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
	echo "version = $(ProjectVersion)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
	echo "PACKAGE_SH_SCRIPTS = $($(Project)BinDistShScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
	echo "PACKAGE_PRL_SCRIPTS = $($(Project)BinDistPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
	echo "PACKAGE_LIB_PRL_SCRIPTS = $($(Project)BinDistLibPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
	echo "PACKAGE_BINS = $($(Project)BinDistBins)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
	echo "PACKAGE_LINKS = $($(Project)BinDistLinks)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
	cat $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile-bin.in >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
	@echo "Generating a shippable configure script.."
	$(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure-bin.in $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure.in 
	( cd $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); autoconf )
	if test -x $(BIN_DIST_MAIN_DIR)/mk/post-install-script ; then \
		cp $(BIN_DIST_MAIN_DIR)/mk/post-install-script \
			$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \
	fi
	if test -x $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script ; then \
		cp $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script \
			$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \
	fi
#
# binary dist'ing the documentation.  
# Which documentation to build/install is hardcoded below.
#

BINDIST_DOC_WAYS = html ps
# BINDIST_DOC_WAYS =

binary-dist ::
	@for i in $(BIN_DIST_DIRS); do 		 	 	\
	  if test -d "$$i"; then 			 	\
	    $(MAKE) -C $$i $(MFLAGS) $(BINDIST_DOC_WAYS); 	\
	    echo $(MAKE) -C $$i $(MFLAGS) install-docs SGMLDocWays="$(BINDIST_DOC_WAYS)" \
		prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) 	\
		exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
		bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
		libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
		libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
		datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
	    $(MAKE) -C $$i $(MFLAGS) install-docs SGMLDocWays="$(BINDIST_DOC_WAYS)" \
		prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) 	\
		exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
		bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
		libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
		libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
		datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
	  fi \
	done

# Rename scripts to $i.prl and $i.sh where necessary.
# ToDo: do this in a cleaner way...

ifneq "$($(Project)BinDistPrlScripts)" ""
binary-dist::
	@for i in $($(Project)BinDistPrlScripts); do \
	     echo "Renaming $$i to $$i.prl"; \
	    $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i  $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.prl; \
	done
endif

ifneq "$($(Project)BinDistLibPrlScripts)" ""
binary-dist::
	@for i in $($(Project)BinDistLibPrlScripts); do \
	     echo "Renaming $$i to $$i.prl"; \
	    $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i  $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i.prl; \
	done
endif

ifneq "$($(Project)BinDistShScripts)" ""
binary-dist::
	@for i in $($(Project)BinDistShScripts); do \
	     echo "Renaming $$i to $$i.sh"; \
	    $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i  $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.sh; \
	done
endif

#
# Do this separately for now
# 
binary-pack::
	( cd $(BIN_DIST_TMPDIR); $(TAR) chzf $(BIN_DIST_NAME).tar.gz $(BIN_DIST_NAME) )

ifneq "$(way)" ""
.PHONY: package-way-dist
package-way-dist::
	( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print | xargs tar cvf $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar )
	gzip $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar
endif

ifneq "$(way)" ""
remove-way-dist::
	( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print -exec $(RM) {} \; )
endif

binary-dist::
	@echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"

# -----------------------------------------------------------------------------
# Building source distributions
#
# Do it like this: 
#
#	$ make
#	$ make dist Project=Ghc
#
# WARNING: `make dist' calls `make distclean' before tarring up the tree.
#

.PHONY: dist

#
# Directory in which we're going to build the src dist
#
SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)

#
# Files to include in source distributions
#
SRC_DIST_DIRS += docs distrib $(SUBDIRS)
SRC_DIST_FILES += \
	configure.in config.guess config.sub configure \
	aclocal.m4 acconfig.h README Makefile Makefile.config install-sh \
	mk/bootstrap.mk \
	mk/boilerplate.mk mk/config.h.in mk/config.mk.in mk/opts.mk \
	mk/paths.mk mk/package.mk mk/suffix.mk mk/target.mk

dist dist-manifest dist-package :: project-check

# clean the tree first, leaving certain extra files in place (eg. configure)
dist :: distclean

dist ::
	-rm -rf $(SRC_DIST_DIR)
	-$(RM) $(SRC_DIST_NAME).tar.gz
	mkdir $(SRC_DIST_DIR)
	mkdir $(SRC_DIST_DIR)/mk
	$(FIND) $(SRC_DIST_DIRS) -type d \( -name CVS -prune -o -name SRC -prune -o -print \) | sed -e 's!.*!mkdir "$(SRC_DIST_DIR)/&"!' | sh
	$(FIND) $(SRC_DIST_DIRS) $(SRC_DIST_FILES) -name CVS -prune -o -name SRC -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -name "\#*" -prune -o -name ".\#*" -prune -o -name "log" -prune -o -name "*-SAVE" -prune -o -name "*.orig" -prune -o -name "*.rej" -prune -o ! -type d -print | sed -e 's!.*!$(LN_S) "$(FPTOOLS_TOP_ABS)/&" "$(SRC_DIST_DIR)/&"!' | sh

# Automatic generation of a MANIFEST file for a source distribution
# tree that is ready to go.
dist-manifest ::
	cd $(SRC_DIST_DIR); $(FIND) . \( -type l -o -type f \) -exec ls -lLG {} \; | sed -e 's/\.\///' > MANIFEST

dist-package :: dist-package-tar-gz

SRC_DIST_PATHS = $(patsubst %, $(SRC_DIST_NAME)/%, $(SRC_DIST_FILES) $(SRC_DIST_DIRS))

dist-package-tar-gz ::
	$(TAR) chzf $(SRC_DIST_NAME)-src.tar.gz $(SRC_DIST_NAME)

dist-package-zip ::
	cd ..; $(LN_S) $(FPTOOLS_TOP_ABS) $(SRC_DIST_NAME) && \
	       $(ZIP) $(ZIP_OPTS) -r $(SRC_DIST_NAME)-src.zip $(SRC_DIST_PATHS)

# -----------------------------------------------------------------------------
# HC file bundles

hc-file-bundle : project-check
	$(RM) -r $(ProjectNameShort)-$(ProjectVersion)
	$(LN_S) . $(ProjectNameShort)-$(ProjectVersion)
	$(FIND) $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler \
	     $(ProjectNameShort)-$(ProjectVersion)/ghc/utils \
	     $(ProjectNameShort)-$(ProjectVersion)/libraries \
	     $(ProjectNameShort)-$(ProjectVersion)/hslibs \
	  \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
	for f in `$(FIND) $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler $(ProjectNameShort)-$(ProjectVersion)/ghc/utils $(ProjectNameShort)-$(ProjectVersion)/libraries $(ProjectNameShort)-$(ProjectVersion)/hslibs -name "*.hsc" -print` ""; do \
	     if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
	        echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
	     fi; \
	done;
	echo $(ProjectNameShort)-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
	echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/*.hs-incl >> hc-files-to-go
	echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/parser/Parser.hs >> hc-files-to-go
	echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/parser/ParserCore.hs >> hc-files-to-go
	echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/main/ParsePkgConf.hs >> hc-files-to-go
	echo $(ProjectNameShort)-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
	tar czf $(ProjectNameShort)-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`

CLEAN_FILES += hc-files-to-go *-hc.tar.gz

# -----------------------------------------------------------------------------

DIST_CLEAN_FILES += config.cache config.status

#
# If you've ended up using an in-place version of Happy,
# make sure it gets built early on.
#
ifeq "$(HAPPY)" "$(FPTOOLS_TOP_ABS)/happy/src/happy-inplace"
build : $(FPTOOLS_TOP_ABS)/happy/src/happy-inplace

$(FPTOOLS_TOP_ABS)/happy/src/happy-inplace : glafp-utils
	$(MAKE) -C happy boot all
endif

# Build all projects that we know about
build :
	@case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
	for i in $(SUBDIRS); do \
	   if [ -d $$i ]; then \
	      $(MAKE) -C $$i boot; \
	      if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
	      $(MAKE) -C $$i all; \
	      if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
	      fi; \
	done

ifeq "$(findstring ghc, $(SUBDIRS))" "ghc"

stage1 : build

stage2 :
	$(MAKE) -C ghc/compiler boot stage=2
	$(MAKE) -C ghc/compiler stage=2

stage3 :
	$(MAKE) -C ghc/compiler boot stage=3
	$(MAKE) -C ghc/compiler stage=3

bootstrap  : bootstrap2
bootstrap2 : stage1 stage2
bootstrap3 : stage1 stage2 stage3

all :: bootstrap

# We want to install the stage 2 bootstrapped compiler by default, but we let
# the user override this by saying 'make install stage=1', for example.
ifeq "$(stage)" ""
INSTALL_STAGE = stage=2
endif

else # Not building GHC

all :: build

INSTALL_STAGE =

endif

boot ::
	@echo "Please use \`make all' only from the top-level, or \`make boot' followed"
	@echo "by \`make all' in an individual project subdirectory (ghc, hslibs etc.)."

install ::
	@case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
	for i in $(filter-out $(ProjectsDontInstall), $(SUBDIRS)); do \
	   if [ -d $$i ]; then \
	      $(MAKE) -C $$i $(INSTALL_STAGE) install; \
	      if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
	      fi; \
	done

install-docs ::
	@case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
	for i in $(filter-out $(ProjectsDontInstall), $(SUBDIRS)); do \
	   if [ -d $$i ]; then \
	      $(MAKE) -C $$i $(INSTALL_STAGE) install-docs; \
	      if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
	      fi; \
	done

# Turn off target.mk's rules for 'all', 'boot' and 'install'.
NO_BOOT_TARGET=YES
NO_ALL_TARGET=YES
NO_INSTALL_TARGET=YES

include $(TOP)/mk/target.mk

# -----------------------------------------------------------------------------